3mm 4mm 6mm 8mm 10mm clear Plastic Solid Pc Polycarbonate Roofing Sheet Uv Polycarbonate Roof Panel polycarbonate sheet for greenhouse
3mm 4mm 6mm 8mm 10mm clear Plastic Solid Pc Polycarbonate Roofing Sheet Uv Polycarbonate Roof Panel polycarbonate sheet for greenhouse
Characteristics
High strength and impact resistance: Solid polycarbonate sheets have extremely high strength and excellent impact resistance, being 250 to 300 times that of ordinary glass, 20 to 30 times that of organic glass, and 25 times that of tempered glass. They are known as "unbreakable glass" and can effectively resist external impacts, ensuring safety.
Good light transmittance: The light transmittance can reach 80%-92%, comparable to that of glass. Moreover, it will not cause yellowing, fogging or poor light transmission when exposed to sunlight, and can maintain a good light transmission effect for a long time.
Uv protection: The surface usually has a co-extruded layer that blocks UV rays from passing through, preventing resin fatigue and yellowing caused by ultraviolet rays from the sun. It is suitable for protecting valuable artworks and exhibits from UV damage.
Light weight: Its specific gravity is only half that of glass, making it easy to transport, handle and install. At the same time, it can also reduce the weight and cost of the support frame.
Flame retardancy: It belongs to the first grade of difficult to ignite, namely B1 grade. Its own ignition point is 580 degrees Celsius. It self-extinguishes when removed from the fire source. During combustion, it does not produce toxic gases and will not contribute to the spread of fire, thus having excellent fire safety.
Flexibility: It can be cold-bent on the construction site according to the design drawings to be installed into arched, semi-circular roofs and Windows, etc. The minimum bending radius is 175 times the thickness of the plate used. It can also be hot-bent to meet different design requirements.
Good sound insulation: The sound insulation effect is obvious. Compared with glass and acrylic sheets of the same thickness, it has better sound insulation. Under the same thickness conditions, the sound insulation of solid polycarbonate sheets is 3-4 dB higher than that of glass, making it an ideal material for sound barriers on highways.
Energy efficiency: It has a lower thermal conductivity (K value) than ordinary glass and other plastics. Its heat insulation effect is 49% higher than that of the same type of glass. It keeps cool in summer and warm in winter, significantly reducing heat loss. It is an environmentally friendly and energy-saving material.
Strong temperature adaptability: It does not become brittle at -100 ℃, does not soften at 135℃, and can maintain the stability of all physical indicators within the temperature range of -40 ℃ to 120℃, making it suitable for use in harsh environments.
Excellent weather resistance: After 4,000 hours of artificial climate aging test, the yellowing degree is 2, and the reduction in light transmittance is only 0.6%. It can be used outdoors for a long time without aging, discoloration or deformation.







|
Characteristics
|
Unit
|
Data
|
|
|
|
|||
|
Thickness
|
mm
|
4
|
6
|
8
|
10
|
|||
|
Weight
|
kg/㎡
|
0.9
|
1.3
|
1.5
|
1.7
|
|||
|
Minimum radius for cold bending arches
|
mm
|
700
|
1050
|
1400
|
1750
|
|||
|
Standard width
|
mm
|
2100
|
2100
|
2100
|
2100
|
|||
|
Standard length
|
mm
|
No Limited
|
|
|
|
|||
|
Light transmission
|
|
|
|
|
|
|||
|
Clear
|
%
|
82
|
81
|
80
|
80
|
|||
|
Grass green
|
%
|
56
|
50
|
44
|
42
|
|||
|
Lake blue
|
%
|
55
|
49
|
45
|
43
|
|||
|
Bronze
|
%
|
43
|
36
|
33
|
29
|
|||
|
White
|
%
|
42
|
35
|
33
|
29
|
|||
|
Blue
|
%
|
35
|
25
|
20
|
16
|
|||
|
Heat transfer coefficient K value
|
W/(㎡.k)
|
3.6
|
3.5
|
3.2
|
3.1
|
|||
|
Weighted sound reduction index
|
db
|
12
|
15
|
15
|
19
|
|||
|
Drop hammer impact
|
|
Pass
|
|
|
|
|||
|
Coefficient of thermal expansion
|
mm/m.℃
|
0.065
|
|
|
|
|||
|
Flame retardant level
|
|
B1
|
|
|
|
|||
|
Service temperature
|
℃
|
minus 40~plus 120
|
|
|
|
|||




1)Established a procedure to check products at all stages of the manufacturing process;Besides, we also developed a procedure which identifies the inspection and test status of all items at all stages of the manufacturing process.
2.How many different kinds of PC sheet you can product?
There are the following products: Glittering Polycarbonate Sheet,Multi-wall Structure Polycarbonate Sheet,Greenhouse Polycarbonate Sheet, General Polycarbonate Solid Sheet,Advertising Polycarbonate Sheet, Polycarbonate Embossed Sheet, Polycarbonate Frosted Sheet, Soundproof Polycarbonate Sheet, Greenhouse Polycarbonate Sheet etc.
3.We are in very high temperature country, twin wall polypropylene sheet can support?
A: Yes, Polycarbonate sheet Temperature Resistance can be:40 ~+120 degree centigrade
4.Do you take special orders ?
Yes , We accept customized products.
5. How to identify the UV side of the sheet?
A: The UV side is the side protected with the printed masking film. To avoid installing the sheet at the wrong side which will void the warranty, please ensure only to remove the masking film after the sheet has been installed.
6. How do I know that a twin wall polypropylene sheet has UV layer?
A: You can’t see the UV layer with the naked eyes. A laboratory test is required to prove this. Some international labs have this facility. Usually UV side layer will more thicker than the down side.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.