CNC Linear Guide Rail Set 35mm (High Rigidity) | Fits HGH35CA Series
Compatible Replacement for HIWIN HGH35CA
This 35mm linear guide block is engineered as a 100% interchangeable alternative to the HIWIN HGH35CA. It matches the original datasheet specifications for dimensions, load ratings, and mass, making it an ideal cost-effective solution for large CNC routers, injection molding machines, and heavy industrial automation.
Engineering Data / Performance Specs
Dimensions and load ratings comply with ISO standard series for Size 35.
| Dimensional & Mechanical Data | |
|---|---|
| Model Number | HGH35CA (Square Type / Heavy Load) |
| Nominal Rail Width (W) | 35 mm |
| Basic Dynamic Load Rating (C) | 49.52 kN |
| Basic Static Load Rating (C0) | 69.16 kN |
| Weight (Block) | 1.56 kg |
| Weight (Rail) | 6.30 kg/m |
| Static Moment (MR) | 1.95 kN-m |
| Static Moment (MP / MY) | 1.15 kN-m |
| Mounting Bolt Size | M8 x 25 |
Structure & Features
- 4-Row Circular Arc Design: Features a 45° contact angle design that ensures equal load capacity in all four directions (radial, reverse radial, and lateral). This provides superior stability for heavy-duty applications.
- Material Standard: Block body and balls are manufactured using GCr15 Bearing Steel, hardened to HRC 60-62 for wear resistance.
-
![HGH35CA Compatible Linear Guide Block 35mm - Direct Replacement for HIWIN]()
![Square Type Heavy Load Linear Bearing Carriage 35mm (HGH35CA Style)]()
Lubrication Guide
⚠️ Critical: Blocks are shipped with anti-rust oil, NOT lubricant. You must grease them before use.
- Grease Type: Lithium Soap-based Grease (NLGI No.2).
- Initial Fill Amount: Approx. 10 cm³ per block (Fill slowly until grease overflows slightly).
- Refill Interval: Every 100km of travel distance, or every 3-6 months depending on operating speed.
- Method: Inject via the supplied M6 grease nipple.
Installation & Mounting
- Surface Prep: Ensure the mounting surface is machined flat. Rough surfaces will reduce accuracy and lifespan.
- Datum Plane: Press the block reference edge firmly against the mounting shoulder before tightening.
- Torque Sequence: Tighten the 4 bolts (M8) diagonally (X-pattern) in 2-3 stages.
Accuracy & Preload Class
- C (Normal): +/- 0.1mm (Standard Stock)
- H (High): +/- 0.03mm (Recommended for Precision)
- Z0 (Light): Best for general automation.
- ZA (Medium): Recommended for heavy CNC mills.
Packaging
Included in Box: 1x HGH35CA Linear Block, 1x Grease Nipple (M6).
Protection: Vacuum sealed in anti-rust bag, individually boxed.
*Disclaimer: HIWIN® is a registered trademark of HIWIN Technologies Corp. This product is an aftermarket replacement part manufactured by YourBrand and is not affiliated with HIWIN. All technical data is provided for compatibility reference.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.