Electronic Rubber Plate Vulcanizing machine Rubber Vulcanizer
- Electronic Rubber Plate Vulcanizing machine Rubber Vulcanizer
- 1. Overview
This series of plate vulcanizing machine is used for pressing all kinds of rubber model products and non-model products, and also can be used for pressing all kinds of thermosetting plastics and foaming rubber and plastic products.With independent power mechanism and electrical system, using the button control.Working pressure and heating temperature can be adjusted within a certain range.This machine is divided into two types: manual and semi-automatic
2. Application industry
Laboratory small plate vulcanizing machine is also called hot press molding machine, mainly used for rubber, plastic products sample making experiments, such as: tensile test, impact test, compression test sample preparation.
Plastic industry: laboratory sample making, small batch trial production, research and development,PPT,PE,PVC and so on.
Rubber industry: laboratory sample making, small batch trial production, research and development, natural rubber, silicone, silicone rubber, etc.
3.Technical parameters
| capacity | 5-30ton adjustable [with automatic exhaust function] |
| temperature range | normal temperature ~ 300℃ |
| temperature accuracy | ±1.5℃ |
| Temperature controller | PLC touch screen |
| temperature control mode | PLC touch screen |
| heater | electric heat pipe heating |
| Working mode | electric heating.Heating mode |
| heating time | room temperature ~ 160℃ about 15min |
| timer | PLC display, 0.01s ~ 999min ~ 999hr (adjustable) |
| two layer hot pressing plate | 350×350mm (high hardness steel plate with special treatment) electric heating. |
| exhaust function | low pressure automatic exhaust a minute 3 ~ 10 times adjustable |
| hydraulic system | proportional hydraulic flow closed loop control system, GPY oil pump (Japanese) drive high performance electric hydraulic with high precision of the resistance of cylinder piston implementation such as speed control mode (travel height can be set in a single freedom) with automatic pressure compensation function, pressure time can be preset, load power, steady lifting, automatic pressure, pressure, pressure relief |
| cylinder stroke | Max 300mm |
| cylinder speed | 11mm/s |
| pressure gauge | 0 ~ 200kg/sq.cm |
| volume | (W×D×H)1600×650×1560 mm |
| Power source | 3∮, AC380V, 15A |
| weight | about 720kg |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.