Premium Bimetallic Brake Disc 34112284809 For BMW Vehicles Aluminum Alloy Vented Brake Rotor for Enhanced Performance

Premium Lightweight Bimetal Brake Disc For BMW Vehicles Floating Lightweight Bimetallic Two-Piece Customized Brake Discs for BMW F87 M2 Brake Rotor

Best solutions for brake discs

My brakes feel squishy. What should I do?

Air in the system indicates you should bleed your brakes. Check hoses for holes before bleeding.

My brake levers creep to the handlebars the longer I press them. What should I do?

Air in the system suggests bleeding your brakes is necessary.

My brakes squeal. What should I do?

Inspect brake pads for contamination and replace if needed. Clean rotors with isopropyl alcohol or disc brake cleaner. Center caliper if necessary.

Can I touch my rotors?

Yes, but it's not advisable for two reasons…

Touching can contaminate rotors with oils or dirt. Rotors also get very hot, risking injury.

If you must touch rotors, wipe them with isopropyl alcohol.

What happens if my brake pads get contaminated?

Clean brake pads with rubbing alcohol, and sand them. Replacement may be needed depending on contamination.

How do I know when to replace my brake pads?

Consistent squealing or reduced braking power suggests pad replacement. Check for wear; if most braking material is gone, replace pads.

How do I know when to replace my rotors?

Rotors don't often need replacement. If braking power is low or brakes squeal loudly, inspect pads and rotors. Significant ridge in metal means consider rotor replacement.

 

MERCEDES-BENZ	GLE	2019.11-	AMG GLE 63 S EQ Boost 4-matic+ (450KW,612PS)
MERCEDES-BENZ	E-CLASS	2016.10-2023.10	E 220 d 4-matic (143KW,194PS)
MERCEDES-BENZ	C-CLASS T-Model	2019.06-2021.02	C 180 (115KW,156PS)
MERCEDES-BENZ	EQS	2022.05-	EQS 500 4-matic (330KW,449PS)
MERCEDES-BENZ	E-CLASS	2016.06-2018.05	E 400 4-matic (245KW,333PS)
MERCEDES-BENZ	E-CLASS	2016.07-2023.10	E 250 (155KW,211PS)
MERCEDES-BENZ	E-CLASS	2018.11-2023.10	E 300 e (235KW,320PS)
MERCEDES-BENZ	A-CLASS	2012.09-2018.05	A 220 CDI (125KW,170PS)
MERCEDES-BENZ	E-CLASS T-Model	2017.06-2018.05	E 350 d 4-matic (190KW,258PS)
MERCEDES-BENZ	C-CLASS	2015.09-2018.08	C 300 (180KW,245PS)

 

 

 

Factory introduction

Wish Brake factory introduction:
1, The factory building covers an area of 30,000 square meters;
3, The production capacity for bimetallic brake discs is more than 100,000pcs per year;
4, We have 3 production lines for different kinds of brake discs;

Technical R&D Department

LEAD Laser Cutting

Brake disc balance machine

This street light features high brightness, energy saving, environmental protection, and easy installation. It has a waterproof rating of IP67 and has passed CE certification. It is suitable for schools, parks, roadsides, factories, squares, etc. It has a warranty period of 3 years. Moreover, we can provide various styles to meet your needs.

Equipment capacity:

• Cutting thickness:
carbon steel 20mm,
stainless steel 8mm,
aluminum 6mm,
brass 5mm
• Cutting area: 4mx6m
• Cutting accuracy: 0.05mm

JP balancing machines are specialized pieces of equipment designed for detecting and correcting mass imbalances in rotating components, ensuring smooth and stable operation across various industrial applications.

Mazak CNC Lathe

Gray iron casting work room

Quality inspection in-line

Equipment capacity:

• Imported from Japan
• Precision: 0.005mm
• Exquisite processing appearance

Gray iron casting is a core link in the brake disc manufacturing workflow, responsible for transforming raw materials such as gray cast iron or ductile iron into brake disc blanks that meet dimensional and performance requirements via melting, molding, pouring, and cleaning processes.

1, We make sure 100% inspection for every brake discs;

2, We make sure to do inspection for every step;

3, We make sure all the products without dimention error.

Products display

Our main products categories are: Bimental brake disc, lightweight brake disc, performance brake disc, carbon ceramic brake disc, replacement brake disc, two-piece brake disc, OEM brake disc, customized brake disc, conventional brake disc, solid brake disc, ventilated brake disc and so on.

Additional Benefits

Our brake discs offers significant added value for e-mobility. Due to recuperation, the brake discs often face corrosion issues on the friction rings, which can lead to temporarily reduced braking response. Our brake discs addresses and solves this challenge.

Reduced CO2 emissions

Optimized driving dynamics

Increase energy efficiency
By reducing weight, the energy efficiency of the vehicle is improved, leading to lower fuel consumption and a significant reduction in CO2 emissions.

Improve performance and handling

The lighter design enhances handling and performance, particularly by reducing upsprung mass.

Model NO.	34112284809	Material:	Aluminum Alloy Cap Bimetal
Position	Front/left wheel	Certification:	ISO/TS16949, ISO14001, IATF-16949, ISO9001, ECE, SGS, etc.
Diameter	380mm	Disc	G3000/Gg20/High Carbon/Carbon Ceramic
Thickness	30mm	Car Model	BMW-F80/F82/F87
Hub Bore Diameter	79mm	Transport Package:	Pallet
Total Height	62.4mm	Trademark:	Wish Brake
Holes	10/5	Surface:	Grinding/Fine-Turning/Coated/Drilled/Slotted/Geomet
Bolt Pattern	120mm	MOQ:	50PCS
Type	P/V	Quality	100% Professional Test
Weight	11.2kg	Origin:	China

 

 

Highlights at a glance

 

Excellent Braking Performance: Stable friction coefficient, fast heat dissipation, smooth braking, low noise and low vibration, greatly improving driving safety.

Please inquiry us: WishBrake@Gmail.com Whatsapp:+8615505455171

Bi-metallic brake disc
bi-metallic brake rotor
Brake Disc
brake rotor
Ventilated brake disc
Drilled brake disc
Painted brake disc
Oiled brake disc
Slotted brake disc
ECE 90 brake disc
High quality brake disc
Coated brake disc

FAQ

1.Q: How can I obtain samples?
A: For sample testing, transportation and sample costs must be covered by you. However, the sample cost is refundable upon order placement. Alternatively, you may request a complimentary Blank Sample.
2.Q: How long till I receive the cosmetic packaging box sample?
A: Samples are prepared for dispatch within 3-7 days and delivered to your location in 3-5 days via express.
3. Q: Can our Logo or company name be printed on your products or packaging?
A: Certainly. We offer Hot Stamping, Printing, Embossing, UV Coating, Silk-screen Printing, or Stickers to display your Logo. Please inquiry us: WishBrake@Gmail.com Whatsapp:+8615505455171

4. Q: How to place an order?
A: Send your purchase order via Email or request a Proforma invoice. To process, provide:
1) Product details - Quantity, Specification (Size, Material, Technological and Packing needs, etc.)
2) Required delivery time
3) Shipping details - Company name, Street address, Phone & Fax number, Destination sea port.
4) Forwarder's contact information, if any in China.
5. When can you expect the price? Please inquiry us: WishBrake@Gmail.com Whatsapp:+8615505455171

We usually provide a quote within 24 hours after receiving your inquiry. For urgent responses, call us or mention the urgency in your email, and we will expedite your request. Detailed inquiries lead to more accurate quotes.
6. How to obtain a sample to verify our quality?
After price confirmation, request samples to assess our quality.
If a blank sample is needed to evaluate design and paper quality, it's free, but you must cover express shipping.
7. What file formats do we accept for printing?
We accept AI, PDF, EPS, TIF, and high-resolution JPG files.
8. Can we create the design for you?
Yes, indeed. Our professional team, with vast experience in gift box design and manufacturing, is ready to transform your ideas into exquisite boxes. If you lack complete files, provide high-resolution images, your Logo, and text with layout preferences. We will create and send the final designs for approval.