x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table

Name: x ray Inspection Equipment with 90 KV x ray Tube and 420*420mm Table
Brand: SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: 7 work days

Brand: WELLMAN

Product Description

X-Ray Inspection Equipment 90 KV X-ray Tube and 420×420mm Table

Key Advantages

13×13 cm high-definition large-area digital flat panel detector
420×420mm table with 10KG load capacity
Automatic navigation window, table moves to your click location
90kv Hamamatsu tubes with the longest lifespan and maintenance-free
Programmable inspection procedures for automated high-volume inspection
Easy operation — only 2 hours training required

Working Principle

X-6000 Automatic Inspection Equipment working principle diagram

Hardware Specifications

Category	Specifications
X-ray Source	Closed microfocus, 90kV max tube voltage, 200μA max tube current, 5μm focal spot, auto preheat
Flat Panel Detector	130mm×130mm effective area, 85μm pixel size, 1536×1536 resolution, 20fps frame rate
Table	420mm×420mm size, 400mm×400mm detectable area, 15kg max load
Equipment	150X geometry magnification, 1500X system magnification, max 3.0s/point inspection speed
Dimensions & Weight	1100mm(L)×1000mm(W)×1600mm(H), 1000kg
Power Supply	AC110-220V 50/60HZ, 1300W max power
Configuration	Intel I5 CPU, 8G RAM, 240GB SSD, 24" HDMI LCD display
Radiation leakage	No leakage, international standard: ≤1μSv/h

Safety Features

Lead glass observation window

Transparent lead glass window shields radiation to observe the inner status.

Window and back door safety interlock

Once users open the window or back door, X-ray tube will power off immediately. When the window or back door is open, users can't turn on the X-ray.

Electromagnetic safety switch

Lock once the X-ray is on, users can't open the observation window.

Emergency stop

Next to the operation position, press to power off

Tube protection

User can't leave the software if you don't close the X-ray tube.

Software Function

Function module	Operation
X-ray tube control	Using Keyboard and mouse
Status bar	Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green
Image effect adjustment	The brightness, contrast and gain of the image can be adjusted freely
Product list	Users can save the inspection parameters such as Z-axis position, brightness, contrast and gain...
Navigation window	The table will move to the place you click and display on the screen.
Motion axis status	Display real-time coordinates.
Inspection result	The measurement results (voids rate, distance, area, etc., set by users) display in order.
Speed control	The movement speed of each axis can be adjusted (slow, normal and fast)
Automatic calculation	Click on two points to determine a rectangle.
Parameters adjustment	Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters.
Add voids manually	Users can draw a polygon or a free figure and calculate it as a void into the void rate.
Save parameters	Users can save parameters and can directly save the parameters.
Distance	Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline.
Distance rate	It is mostly used to measure the soldering rate of the through-hole.
Angle	Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays.
Radius	Click three points to determine a circle and measure the circumference, area and radius.
Perimeter	Click two points to determine a square, measure the length, width and area.
Manual setting	Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture.
Array	Set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures.
Automatic identification	The software automatically identifies the positions, takes measurements, and saves the image.