Electric Holding Furnace for Sintering Magnetic Materials in Mbf40-10n Atmosphere Box at 1000°C from Electric Fuel

Mainly used for electronic components, ceramic filters in high temperature binder burn off and sintering process.

• Rated Temp.: 850ºC
• Max Temp.: 1000ºC
• Effective Dimensions: 330 × 200 × 660mm(W×H×D)
• Heating Method: SiC Rods
• Process Atmosphere: Air
• Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
• Temperature Uniformity: better than ±5ºC (insulation 2 hours at 850ºC test)
• Thermocouple: Type N
• Heating Method: ceramic tube-encased silicon carbide rod
• Temperature control points: 3 points
• Process Steps: 9 steps
• Oxygen Content Detection: Configured with micro-oxygen analyzer for real-time monitoring
• Exhaust: One exhaust port with manual adjustment
• Alarm System: Over temperature, thermocouple failure and other abnormal conditions activate sound and light alarm protection
• Max Heating Power: 25kW
• Surface Temperature Rise: ≤ 40ºC
• Furnace Dimensions: about 1150*1970*1460mm (W×H×D)
• Appearance Color: light gray

1. Furnace frame
2. Chimney
3. Furnace chamber
4. Furnace door
5. Heating element
6. Sagger (a type of ceramic container used in kilns)
7. Roller bar (used in kilns for moving ceramics during the firing process)

• Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance
• Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 4 - 12m³/h
• Ventilation system: non-contact access to the user pumping system, pumping capacity greater than 15m³/h
• Power conditions: capacity greater than 35kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz (according to local situation)
• Installation site: 2500mm×2000mm×3000mm (W×H×D), installation area greater than 5m²