Vertical Hrf512-05n Nitrogen Hot Air Bbo Furnace with Fast Heating and Cooling Speed

Powder materials, magnetic materials, ceramics, glass, metals, plastics, and post-3D printing drying, curing, debinding, tempering, annealing, aging, preheating, and age hardening.

1. Rated Temp.: 500ºC
2. Max Temp.: 750ºC
3. Effective Dimensions: 800 * 800 * 800mm(W*H*D)
4. Heating Method: Stainless Steel Heater
5. Process Atmosphere: Nitrogen
6. Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
7. Temperature Uniformity: better than ±5ºC (insulation 1 hour at 400ºC test)
8. Thermocouple: Type K
9. Temperature control points: 1
10. Temperature measurement points: 1 point
11. Process Steps: 4 * 10 steps
12. Exhaust: One exhaust port on top, DN50, The exhaust vent size can be manually adjusted
13. Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection
14. Max Heating Power: 24kW
15. Heating rate: ≤5°C/min (operable at 1°C/min)
16. Insulation Power: ≤ 12kW
17. Surface Temperature Rise: ≤ 35ºC
18. Unique hot air circulation ensures uniform atmosphere distribution
19. Weight: about 1200kg
20. Furnace Dimensions: about 1500*1930*2000mm (W*H*D, No chimney included)
21. Appearance Color: light gray

1. Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance
2. Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 10m3 /h
3. Ventilation system: non-contact access to the user pumping system, pumping capacity is greater than 15m3 /h
4. Ground requirements: level, no obvious vibration, bearing capacity >300Kg/m2
5. Power conditions: capacity greater than 32kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green
6. Installation site: 2000mm*3000mm*3000mm (W*H*D), installation area greater than 6m2