18kW Nitrogen Reducing Atmosphere Furnace Ceramic Drying Oven Heat Treatment Gas Furnace

Effective Dimensions 600*600*600mm W*H*D Nitrogen Atmosphere Ceramic Drying Oven for High Temperature Drying HRF216-05N

Mainly used for binder burning out (BBO) process of electronic components, ceramic substrates.

• Rated Temp.: 350ºC
• Max Temp.: 500ºC
• Effective Dimensions: 600 × 600 × 600mm(W×H×D)
• Heating Method: Stainless Steel Heater
• Process Atmosphere: Nitrogen
• Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
• Temperature Uniformity: better than ±5ºC (insulation 1 hour at 400ºC test)
• Thermocouple: Type K
• Temperature control points: 1
• Temperature measurement points: 1 point
• Process Steps: 4 × 10 steps
• Exhaust: One exhaust port on top
• Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection
• Max Heating Power: 18kW
• Insulation Power: ≤ 12kW
• Surface Temperature Rise: ≤ 35ºC
• Weight: about 900kg
• Furnace Dimensions: about 1350×1750×21950mm (W×H×D)
• Appearance Color: light gray

• Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance.
• Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 10m³/h.
• Ventilation system: non-contact access to the user pumping system, pumping capacity is greater than 15m³/h
• Ground requirements: level, no obvious vibration, bearing capacity >300Kg/m²
• Power conditions: capacity greater than 24kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz (according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green
• Installation site: 2000mm×3000mm×3000mm (W*H*D), installation area greater than 6m²