B&R 8BVI0220HWD0.000-1 ACOPOSmulti 22A Dual-Axis Inverter

Product Overview

The B&R 8BVI0220HWD0.000-1 is an ACOPOSmulti dual-axis inverter module containing two independent power inverters in one wall-mounted unit. Each motor connection supports 16 kW continuous motor power, 22 Aeff continuous current and 55 Aeff peak current.

The dual-axis construction can reduce the cabinet space required for machines with paired or coordinated servo axes. It is particularly different from the similarly named 8BVI0220HWS0.000-1, which is a single-axis module.

Main Product Information

Dual-Axis Configuration

The module has two motor connections, two temperature-sensor connections and two holding-brake outputs. Although both axes are housed in one module, motor sizing and drive parameters must be checked independently for each connected axis.

The module supports two ACOPOSmulti plug-in-module slots. The installed encoder, communication or safety modules must be identified before replacement because the base inverter material number alone does not describe the complete machine configuration.

Replacement Checklist

• Confirm the HWD0 dual-axis designation.
• Check the full 8BVI0220HWD0.000-1 material number.
• Record both motor models and their rated-current requirements.
• Identify the plug-in modules installed in Slot 1 and Slot 2.
• Verify both encoder cables, brake circuits and temperature-sensor wiring.
• Back up both axis parameter sets before removing the original module.
• Confirm the mandatory terminal block set and connector arrangement.