Gefran M30-6-M-P05M-1-4-0 2130X000X00 Melt Transducer
Product Overview
The Gefran M30-6-M-P05M-1-4-0 2130X000X00 is a mercury-filled M3-series melt pressure transducer identified by Gefran ordering number F008531. It measures polymer melt pressure over a verified 0–5000 psi range and produces a low-level 3.33 mV/V strain-gauge signal for connection to a compatible pressure indicator, controller or signal conditioner.
This M30 configuration uses a rigid-stem-only construction. It is intended for applications where the sensor electronics can be positioned directly behind the 6-inch rigid stem without requiring a flexible capillary section.
Main Features
- Exact Gefran ordering number F008531.
- 0–5000 psi melt pressure range.
- 3.33 mV/V low-level strain-gauge output.
- Six-pin electrical connector.
- Six-inch rigid stem without a flexible capillary.
- 1/2-20 UNF process connection.
- Mercury-filled hydraulic pressure transmission system.
Technical Specifications
| Complete Model | M30-6-M-P05M-1-4-0 2130X000X00 |
| Ordering Number | F008531 |
| Series | M3 |
| Pressure Range | 0–5000 psi |
| Output | 3.33 mV/V |
| Accuracy Class | 0.5% FSO |
| Connector | 6-pin |
| Process Thread | 1/2-20 UNF |
| Rigid Stem | 6 inches / approximately 153 mm |
| Flexible Capillary | None |
| Published Maximum Process Temperature | Up to 400°C, subject to installation conditions |
Rigid-Stem Installation
The rigid stem must place the pressure-sensitive diaphragm correctly within the process mounting hole while keeping the transducer housing within its permitted temperature range. Verify mounting-hole depth, thread condition, sealing surface and available clearance before installation. Do not use the housing to force a damaged thread into position.
Signal Conditioning Requirements
The 3.33 mV/V output is not a 4–20 mA loop signal. The connected instrument must provide suitable bridge excitation and accept a low-level strain-gauge input. Confirm excitation voltage, connector pinout, R-Cal handling, shielding and controller scaling before energizing the system.
Maintenance and Replacement Notes
Do not clean the diaphragm with sharp or abrasive tools. Hardened polymer should be removed only by an approved procedure. Verify F008531 and the complete 2130X000X00 configuration because different diaphragm, accuracy, thread and stem codes can share a similar external appearance.
Related Models
M30-6-M-P10M-1-4-0 2130X000X00 F008535 provides a 10,000 psi range. M31-6-M-P05M-1-4-D 2130X000X00 F008650 retains the 5000 psi range but adds an 18-inch flexible capillary. W3 and K3 models use different pressure-transmission fluids and temperature capabilities.
Related models are provided for family reference only and are not automatically interchangeable.
Inquiry and Supply Notes
Provide photographs of the complete nameplate, connector, stem and diaphragm with the inquiry. Confirm whether the application permits a mercury-filled product under the applicable regional and installation requirements. Availability and calibration documentation require separate confirmation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.