Bently Nevada 330103-00-12-10-02-00 API 670 Compliant Proximity Probe with M10 x 1 Metric Thread and 120 mm Case Length
Price:
66USD
MOQ:
1
Delivery Time:
2-3 work days
Brand:
Bently Nevada
Product Description
Bently Nevada 330103-00-12-10-02-00 3300 XL 8 mm Proximity Probe
| Parameter | Specification |
|---|---|
| Model Series | 3300 XL 8 mm Proximity Probe |
| Thread Type | M10 x 1 (Metric) |
| Unthreaded Length Option | 0 mm (Fully Threaded) |
| Overall Case Length Option | 120 mm |
| Total Length Option | 1.0 meter (3.3 feet) |
| Connector Option | Miniature coaxial ClickLoc connector |
| Cable Type | Standard Cable |
| Agency Approval Option | No Approvals |
| Transducer System | 3300 XL 8 mm |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 Stainless Steel (SST) |
| Operating Temperature | -51 °C to +177 °C (-60 °F to +351 °F) |
| Pressure Rating | Up to 70 psi (4.8 bar) |
| Linear Range | 2.0 mm (80 mils) |
| Frequency Response | 0 to 10 kHz |
| Recommended Proximitor | 3300 XL Proximitor Sensor (Model 330180) |
For inquiries, please contact:
Contact: Miya Zheng
Email: sales@amikon.cn
WhatsApp: +86 180 2077 6792
Industrial Applications
- Radial Vibration and Position Monitoring
Radial vibration and position monitoring is really the main use case for the Bently Nevada 330103-00-12-10-02-00. In rotating machinery, this probe is usually installed to watch radial vibration, shaft axial displacement, and even shaft eccentricity. Nothing too abstract here — it’s basically about catching early signs of bearing wear or instability before things go bad. - Critical Asset Protection (API 670 Compliant)
In API 670 compliant setups, especially across oil, gas, and power plants, this kind of probe is pretty standard. You’ll see it on steam and gas turbines quite often, where it helps track vibration levels and thermal expansion during operation. Same story on centrifugal compressors — it’s commonly used to catch surge conditions and protect high-speed impellers when process conditions shift quickly. Hydroelectric turbine protection is another typical one, mainly for runout and alignment checks on large units. - Industrial Predictive Maintenance
For industrial predictive maintenance, the probe usually sits as part of a bigger monitoring loop. It connects into systems like the Bently Nevada 3500 system or sometimes Orbit 60 compatible setups. When paired with System 1, the data becomes more useful over time — engineers look at trends, not just live values, and plan maintenance during scheduled outages instead of reacting to failures. - Specialized Machinery Monitoring
On the mechanical side, the design matters too. With its M10x1 metric thread and around 120mm case length, it fits a lot of industrial mounting setups without modification. You’ll see it used in gearbox shaft monitoring, pump protection (especially centrifugal pumps in water treatment or chemical plants), and differential expansion measurement during startup and shutdown cycles. It’s not limited to one machine type, which is why it shows up in a lot of rotating equipment packages. - Harsh Environment Instrumentation
In harsher environments, like power plants or oil & gas sites, it’s also quite common. The probe is built to handle moisture, oil exposure, and temperature swings, and with IP67 level protection plus pressure resistance up to around 70 psi, it holds up in field conditions where instrumentation isn’t exactly in a clean room.
Key Features
- Full 3300 XL System Compatibility
Full 3300 XL system compatibility is basically one of the main selling points of the Bently Nevada 330103-00-12-10-02-00. It sits inside the 3300 XL 8mm Transducer System and works directly with other Proximitor sensors and extension cables. In most setups, people expect that 2.0 mm (80 mils) linear range behavior, so it fits pretty naturally with Bently Nevada 3500 system configurations without much adjustment. - Precision Metric Threading and Housing
On the mechanical side, the design is quite straightforward but practical. The M10 x 1 metric thread and around 120 mm case length make it easy to mount in different machine housings. Since it’s fully threaded (0 mm unthreaded section), technicians usually like it for situations where depth adjustment needs to be flexible — not something you want to struggle with during installation. - Advanced ClickLoc™ Connector
The connector side uses a ClickLoc™ coaxial design. It’s one of those small details that actually matters in the field. Once it clicks in, it stays locked even under vibration, and you don’t need special tools to disconnect it. In real maintenance work, that saves time more than people expect. - Robust Material Construction
Material choice is also fairly robust. The probe tip uses PPS (Polyphenylene Sulfide), which holds up against chemical exposure and moisture. The housing is stainless steel (AISI 303/304 SST), so it’s not something that degrades quickly in oil, humidity, or general industrial environments. - Exceptional Environmental Resistance
Temperature and pressure ratings are on the tough side as well. It can run in roughly -51 °C up to +177 °C, and it handles up to about 70 psi. In power plants or oil & gas rotating equipment, that kind of range is usually what keeps it in service for long periods without issues. - API 670 Standard Compliance
From a standards point of view, it aligns with API 670 requirements for non-contact vibration and position measurement. That’s why it shows up quite often in critical asset protection systems and sometimes in emergency shutdown system (ESD) applications as well. - Enhanced Signal Stability
Performance-wise, the signal stability is one of its stronger points. It’s mainly used for radial vibration and thrust position monitoring, but in practice it also helps with shaft eccentricity and differential expansion tracking. Even at higher speeds, the signal tends to stay stable enough for reliable condition monitoring, especially in turbine and compressor environments.
Frequently Asked Questions
1. Q: What is the main function of the 330103-00-12-10-02-00 probe?
A: The Bently Nevada 330103-00-12-10-02-00 is mainly used for non-contact measurement of radial vibration and thrust position. In rotating machinery, it basically provides the key signal for condition monitoring, especially on high-speed shafts where early detection matters.
2. Q: What are mounting and thread details for the 330103-00-12-10-02-00?
A: It comes with an M10 x 1 metric thread and around 120 mm overall case length. The 0 mm unthreaded (fully threaded) design gives a bit more flexibility during installation, especially when adjusting probe depth inside machine housings.
3. Q: Is the 330103-00-12-10-02-00 compatible with the Bently Nevada 3500 monitoring system?
A: Yes, it’s commonly used together with the Bently Nevada 3500 system. But in practice, it works through a 3300 XL Proximitor setup, along with extension cables, before the signal goes into the rack system.
4. Q: What type of connector does the 330103-00-12-10-02-00 use?
A: It uses a miniature coaxial ClickLoc™ connector and typically comes with about 1.0 meter total cable length. The locking design is quite practical — once it clicks in, it stays stable even in high-vibration environments, which is usually what you want in field installations.
5. Q: Does the 330103-00-12-10-02-00 meet API standards?
A: Yes, it is designed in line with API 670 requirements. That’s why it’s often used in critical asset protection systems and emergency shutdown system (ESD) applications where reliability is expected, not optional.
6. Q: What is the operating temperature range for the 330103-00-12-10-02-00?
A: The 330103-00-12-10-02-00 can operate in a fairly wide range, from about -51 °C up to +177 °C. So whether it’s power plant equipment or oil & gas rotating machinery, it generally holds up well in harsh field conditions without affecting measurement stability.
Compatible Part Numbers
| 330730-040-03-00 | 128031-01C 128031-01 |
| 330104-00-25-10-02-05 | 330904-05-14-05-02-00 |
| 330103-00-07-20-02-00 | 330930-040-00-00 |
| 126599-01 | 330909-00-60-10-02-05 |
| 990-04-70-01-00 | 21000-16-10-15-057-03-02 |
| 330103-00-15-05-01-00 | 21000-16-10-15-102-03-02 |
| 330905-00-10-10-02-00 | 21000-16-10-15-114-03-02 |
| 991-06-50-01-00 | 21000-16-10-15-144-03-02 |
| 330103-00-15-10-02-00 | 991-01-XX-01-CN |
| 1X35668 | 3500/93 135799-02 |
| 330103-02-07-10-02-00 | 22810-00-10-10-02 |
| 330103-02-12-10-02-00 | 330193-00-05-10-00 |
| 330103-05-13-10-02-00 | 330103-02-12-05-02-CN |
| 330103-07-12-10-02-00 | 330103-06-13-05-02-CN |
| 330104-01-05-10-02-00 | 330104-00-04-10-02-CN |
| 330703-050-120-10-02-00 | 990-05-XX-01-CN |
| 330709-050-120-10-02-00 | 330101-30-63-15-02-CN |
| 76686-040-01 | 330104-00-04-50-11-00 |
| 81305-040-00 | 330104-00-12-10-02-00 |
| 135489-04 | 330104-00-15-10-02-00 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
AMIKON LIMITED
Location
32D units,GuoMao Building No 388 Hubin South Road Siming district Xiamen, Fujian China
Contact Person
Miya