Totem pole output type photocoupler ISOMICRON ICPL-480W-500EAXW for direct drive of power electronics

Product Overview

The ICPL-480 series is a fast-speed photocoupler designed for high common mode rejection. It integrates a LED and a photo detector with a built-in Schmitt trigger for logic-compatible waveforms, eliminating the need for external wave shaping components. The totem pole output stage simplifies integration by removing the requirement for a pull-up resistor, enabling direct drive of Intelligent Power Modules or gate drives. Its minimized propagation delay difference between devices contributes to improved inverter efficiency by reducing switching dead time. This photocoupler is suitable for applications requiring robust digital isolation and high common mode transient immunity.

Product Attributes

• Brand: ISOMICRON
• Series: ICPL-480
• Certifications: UL - UL1577, VDE - EN60747-5-5(VDE0884-5), CQC - GB4943.1
• Output Type: Positive output type (totem pole output)
• Package Type: LSOP6
• Lead Form Option: P (9mm Clearance), W (11mm Clearance)
• Halogen Free Option: E (Halogen-free, Lead-free)

Technical Specifications

Parameter	Symbol	Min.	Typ.	Max.	Unit	Test Condition	Notes
Ordering Information
Part Number	ICPL-480P-500E	-	-	-	-	LSOP6 Package, Reel 13", 3000 Quantity	-
Part Number	ICPL-480W-500E	-	-	-	-	LSOP6 Package, Reel 13", 3000 Quantity	-
Features
Truth Table Guaranteed	-	-	-	-	-	VCC from 4.5V to 30V	-
Short Maximum Propagation Delays	-	-	-	-	ns	-	-
Minimized Pulse Width Distortion (PWD)	PWD	-	-	120	ns	f = 10kHz, Duty Cycle = 50%, IF = 2mA, VCC = 30V	Note 2
Very High Common Mode Rejection (CMR)	CMH	20	-	-	kV/s	IF=4.0mA,VCC= 5V, Ta= 25 C, VCM= 1.5KV	Note 4
Common Mode Transient Immunity at Logic Low	CML	20	-	-	kV/s	IF=0mA,VCC= 5V, Ta= 25C, VCM= 1.5KV	Note 4
Hysteresis	-	-	-	-	-	-	-
Absolute Maximum Ratings
Storage Temperature	Tstg	-55	-	125	C	-	-
Operating Temperature	Topr	-40	-	110	C	-	-
Output IC Junction Temperature	TJ	-	-	125	C	-	-
Average Forward Input Current	IF	-	-	20	mA	-	-
Reverse Input Voltage	VR	-	-	5	V	-	-
Output Collector Current	IO	-	-	50	mA	-	-
Supply Voltage	VCC	0	-	35	V	-	-
Output Collector Voltage	VO	-0.5	-	Vcc	V	-	-
Total Package Power Dissipation	PT	-	-	145	mW	-	-
Lead Solder Temperature	Tsol	-	-	260	C	-	-
Recommended Operation Conditions
Operating Temperature	Ta	-40	-	110	C	-	-
Supply Voltage	VCC	4.5	-	30	V	-	Note 1
Input Current (ON)	IF(ON)	1.6	-	5	mA	-	Note 2
Input Voltage (OFF)	VF(OFF)	0.8	-	-	V	-	-
Isolation Characteristic
Withstand Insulation Test Voltage	VISO	5000	-	-	V	40% RH 60%, t = 1min, Ta = 25C	Note 1, 2
Input-Output Resistance	RI-O	-	-	1012		VI-O = 500V DC	-
Electrical Optical Characteristics
Input Forward Voltage	VF	1.6	2.0	2.4	V	IF=10mA	-
Input Threshold Current (Low to High)	IFLH	-	0.2	1.5	mA	VCC=30V, VO>5V	-
Input Threshold Voltage (High to Low)	VFHL	0.8	-	-	V	VCC=30V, VO<5V	-
High level output current	IOH	-	-	-160	mA	VCC=5.5V, IF=5mA, VO=GND	Note 1
Low level output current	IOL	160	-	-	mA	VO=VCC=5.5V, VF=0V	Note 1
Switching Specification
Propagation Delay Time to Output Low Level	tPHL	-	110	220	ns	f = 10kHz, Duty Cycle = 50%, IF = 2mA, VCC = 30V	Note 1
Propagation Delay Time to Output High Level	tPLH	-	90	220	ns	f = 10kHz, Duty Cycle = 50%, IF = 2mA, VCC = 30V	Note 1
Propagation Delay Difference Between Any Two Parts	PDD	-200	-	+200	ns	-	Note 3
Rise Time	tr	-	6	-	ns	-	-
Fall Time	tf	-	7	-	ns	-	-