Power IGBT and MOSFET driver LITEON LTV-5341C-TP1 photocoupler with wide temperature operation range

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The LTV-5341 series Photocoupler is designed for driving power IGBTs and MOSFETs in motor control inverters and power supply systems. It features an AlGaAs LED coupled to an integrated circuit with a power output stage, offering rail-to-rail output voltage and Under Voltage Lock-Out (UVLO) protection. Its operational parameters are guaranteed across a wide temperature range of -40C to +110C.

Product Attributes

Brand: LITE-ON
Certifications: UL1577, IEC/EN/DIN EN 60747-5-5

Technical Specifications

Parameter	Symbol	Min.	Typ.	Max.	Unit	Test Condition	Figure	Note
Absolute Maximum Ratings
Storage Temperature	Tstg	-55		+125	C
Operating Temperature	Topr	-40		+110	C
Total Output Supply Voltage (VCC VEE)		0		35	V
Average Forward Input Current	IF			20	mA
Peak Transient Input Current	IF(TRAN)			1.0	A	Pulse width (PW) 1 s, 300 pps		1
High Peak Output Current	IOH(PEAK)			3.0	A			2
Low Peak Output Current	IOL(PEAK)			3.0	A	Exponential waveform. Pulse width 0.3 s, f 15 kHz		2
Output Voltage (PEAK)	VO(PEAK)			VCC	V
Input Power Dissipation	PI			40	mW
Output IC Power Dissipation	PO			450	mW
Lead Solder Temperature	Tsol			260	C
Recommended Operating Conditions
Supply Voltage	VCC	15		30	V
Input Current (ON)	IFL(ON)	3		10	mA	The rise and fall times of the input on-current should be less than 0.5 s		1
Input Voltage (OFF)	VF(OFF)	0		0.8	V
Peak Low-Level Output Current	IOPH			-2.5	A
Peak Low-Level Output Current	IOPL			2.5	A
Operating Frequency	f			50	kHz
Electrical Optical Characteristics
Input Forward Voltage	VF	1.4	1.6	1.8	V	IF = 10mA	1
Input Forward Voltage Temperature Coefficient	VF/ T		-2.0		mV/OC	IF = 10mA
Input Threshold Current (Low to High)	IFLH		0.8	2.5	mA	VCC = 15-30 V, VO > 1V	4,16
Input Threshold Voltage (High to Low)	VFHL	0.8			V	VCC = 15-30 V, VO
Input Capacitance	CIN		33		pF	f = 1 MHz, VF = 0 V
Output High Level Supply Current	ICCH		1.6	3	mA	IF = 10 mA, VCC = 30V, VO = Open	5,6
Low Level Supply Current	ICCL		2.0	3	mA	IF = 0 mA, VCC = 30V, VO = Open
High level output current	IOH			-1.0	A	VO = (VCC 1.5 V)	8,14	1
				-2.5	A	VO = (VCC 4 V)		2
Low level output current	IOL	1.0			A	VO = (VEE + 1.5 V)	7,15	1
		2.5			A	VO = (VEE + 4 V)		2
High level output voltage	VOH	VCC - 0.3		VCC - 0.1	V	IF = 10mA, IO = -100mA	6,12
Low level output voltage	VOL		VEE + 0.25	VEE + 0.4	V	IF = 0mA, IO = 100mA	5,13
UVLO Threshold	VUVLO+	11.0	12.5	13.5	V	VO > 5V, IF = 10 mA	17
	VUVLO-	9.5	11.1	12.0	V	VO
UVLO Hysteresis	UVLOHYS		1.5		V
Switching Specification
Propagation Delay Time to High Output Level	tPLH		90	150	ns	Rg = 20, Cg = 10nF, f = 25 kHz, Duty Cycle = 50% IF = 3 to 10 mA, VCC = 15 to 30V VEE = ground	9,10,11, 18
Propagation Delay Time to Low Output Level	tPHL		110	150
Pulse Width Distortion	PWD			50
Propagation delay skew	tPSK	-100		100	3	The difference between tPHL and tPLH between any two parts series parts under same test conditions.		3
Output Rise Time (10 to 90%)	Tr		10		18
Output Fall Time (90 to 10%)	Tf		10
Common mode transient immunity at high level output	\|CMH\|			30	kV/s	TA = 25C, IF = 5 mA, VCM = 1000 V, VCC = 30 V	19	1
Common mode transient immunity at low level output	\|CML\|			30	kV/s	TA = 25C, VF = 0 V, VCM = 1000 V, VCC = 30 V		2