Triac driver output optoisolator 6 pin dip Orient OR MOC3021S TA1 compliant with EU REACH and RoHS standards
Product Overview
The MOC302X series is a range of 6-pin DIP optoisolators featuring a triac driver output, designed for applications requiring high isolation voltage (5,000Vrms). These devices contain an infrared light-emitting diode and a photodetector, are compliant with EU REACH standards, and meet RoHS requirements. They are suitable for controlling AC motor drives, AC motor starters, lighting controls, solenoid/valve controls, solid-state relays, and temperature controls, operating within a temperature range of -40C to +100C.
Product Attributes
- Brand: Orient
- Manufacturer: Shenzhen Orient Tech Ltd. Co., Ltd
- Product Line: MOC302X
- Certifications: EU REACH, RoHS compliant
- Package: 6-pin DIP
- Output Type: Triac Driver
- Construction: Halogen and Sb2O3 free
Technical Specifications
| Parameter | Symbol | Condition | Min | Typ. | Max | Unit |
|---|---|---|---|---|---|---|
| General Specifications | ||||||
| Isolation Voltage | Viso | AC Test, 1 minute, RH=40~60% | 5000 | Vrms | ||
| Operating Temperature | Topr | -40 | +100 | |||
| Storage Temperature | Tstg | -55 | +150 | |||
| Soldering Temperature | Tsol | Soldering time is 10 seconds | 260 | |||
| Input Specifications | ||||||
| Forward Current | IF | Normal Temperature (T=25) | 50 | mA | ||
| Junction Temperature | TJ | Normal Temperature (T=25) | 125 | |||
| Reverse Voltage | VR | Normal Temperature (T=25) | 6 | V | ||
| Power Dissipation | P | Normal Temperature (T=25) | 100 | mW | ||
| Forward Voltage | VF | IF=20mA | 1.2 | 1.6 | V | |
| Reverse Current | IR | VR=6V | 0.05 | 10 | A | |
| Output Specifications | ||||||
| Off-State Output Terminal Voltage | VDRM | Normal Temperature (T=25) | 400 | V | ||
| Peak Repetitive Surge Current | ITSM | PW=1ms, 120 pps, Normal Temperature (T=25) | 1 | A | ||
| Junction Temperature | TJ | Normal Temperature (T=25) | 125 | |||
| Collector Power Dissipation | PC | Normal Temperature (T=25) | 300 | mW | ||
| Total Power Dissipation | Ptot | Normal Temperature (T=25) | 330 | mW | ||
| Peak Blocking Current, Either Direction | IDRM | VDRM = 400V, Normal Temperature (T=25) | 10 | 100 | nA | |
| Peak On-State Voltage, Either Direction | VTM | ITM=100mA, Normal Temperature (T=25) | 1.7 | 3.0 | V | |
| Critical Rate of Rise of Off-State Voltage | dv/dt | Vin=240Vrms | 1000 | V/us | ||
| LED Trigger Current (IFT) | ||||||
| MOC3020 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 30 | mA | ||
| MOC3021 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 15 | mA | ||
| MOC3022 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 10 | mA | ||
| MOC3023 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 5 | mA | ||
| Holding Current, Either Direction | IH | Normal Temperature (T=25) | 200 | A | ||
Naming Rule
The naming convention for MOC302X series is as follows:
- Manufacturer Name: OR represents Shenzhen Orient Components Co., Ltd.
- Rank Code (X): Indicates the LED trigger current rank (0, 1, 2, 3). X=0 for MOC3020, X=1 for MOC3021, X=2 for MOC3022, X=3 for MOC3023.
- Week Code: Represents the manufacturing week (e.g., 01 for the first week).
- Year Code: Represents the manufacturing year (e.g., 8 for 2018).
- Anode: Indicates the positive terminal.
- Device Part Number: MOC302X photocoupler product.
Outer Dimensions
Refer to diagrams for MOC302X, MOC302XM, and MOC302XS series outer dimensions.
Taping Dimensions
Taping dimensions are provided for MOC302XS-TA and MOC302XS-TA1 series, with a tape width (W) of 160.3 mm and a pitch of 120.1 mm. Each reel contains 1000 units.
Soldering Temperature Profile
Recommended soldering profiles are provided for:
- IR Reflow Soldering (JEDEC-STD-020C compliant): Preheat (TSmin 150C, TSmax 200C, TS 9030 sec), Soldering Zone (TL 217C, tL 60 sec), Peak Temperature 260C. Ramp-up rate max 3C/sec, Ramp-down rate 3~6C/sec. Maximum three soldering times recommended.
- Wave Soldering (JEDEC22A111 compliant): Temperature 260+0/-5C for 10 sec. Preheat temperature 5 to 140C for 30 to 80 sec. Single soldering recommended.
- Hand Soldering by Soldering Iron: Temperature 380+0/-5C for max 3 sec per lead. Single soldering recommended.
Recommended Footprint Patterns
Refer to diagrams for recommended PCB land patterns.
Characteristics Curve
Refer to diagrams for characteristic curves.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.