Jilin Sino Microelectronics SPE15S60F E 600V 15A Intelligent Power Module for inverter applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Intelligent Power Module (IPM) - SPE15S60F-E
The SPE15S60F-E is a 600V/15A three-phase inverter Intelligent Power Module (IPM) featuring low-loss trench gate-field stop IGBTs. It is designed for applications such as refrigerator compressors, air-conditioning compressors, low power inverters, and industrial sewing machines. Key features include integrated bootstrap diodes, high-speed 600V level conversion for IGBT drive, and comprehensive protection functions including under-voltage, short-circuit (overcurrent), and over-temperature protection. The module also provides a fault signal output and is compatible with 3.3V & 5V input signals.
Product Attributes
- Order Number: SPE15S60F-E
- Marking: SPE15S60F-E
- Package: DIP25-DBC
- Certifications: Halogen-Free
Technical Specifications
| Project | Mark | Condition | Ratings | Units | Min. | Typ. | Max. |
| Absolute Maximum Ratings | |||||||
| Supply voltage | VCC | Applied between P- NU, NV, NW | 450 | V | |||
| Supply voltage (including surge) | VCC(Surge) | Applied between P- NU, NV, NW | 500 | V | |||
| Collector to emitter voltage | VCES | 600 | V | ||||
| Collector current | IC | TC = 25C | 15 | A | |||
| Collector current (peak) | ICP | TC= 25C, pulse width is less than 1ms | 30 | A | |||
| Collector power consumption | PC | TC = 25C, single chip | 39 | W | |||
| Junction temperature | Tj | (@surface temperature TC 100C) | 150 | C | -40 | +150 | |
| Upper arm control supply voltage | VDB | Applied between UFB-U, VFB-V, WFB-W | 20 | V | |||
| Control supply voltage | VD | Applied between VP1-VNC,VN1 VNC | 20 | V | |||
| Input signal voltage | VIN | Applied between UP, VP, WP, UN ,VN ,WN-VNC | V | -0.5 | VD+0.5 | ||
| Fault output voltage | VFO | Applied between FO-VNC | V | -0.5 | VD+0.5 | ||
| Fault output current | IFO | FO terminal sink current value | 1.5 | mA | |||
| Input voltage of current detection terminal | VSC | Applied between CIN-VNC | V | -0.5 | VD+0.5 | ||
| Power supply voltage self-protection range (short circuit) | VCC(PROT) | Tj= 150C, no repetition, time is less than 2us | 400 | V | |||
| Module working temperature | Tc | -20Tj 150C | C | -20 | +100 | ||
| Storage temperature | Tstg | C | -40 | +125 | |||
| Insulation withstand voltage | Viso | Sine wave 60Hz, AC for 1 minute, between pin and heat sink | 1500 | Vrms | |||
| Thermal Resistance | |||||||
| Junction to case thermal resistance | Rth(j-c)Q | Single IGBT element | C/W | 3.2 | |||
| Junction to case thermal resistance | Rth(j-c)F | Single FRD element | C/W | 4.0 | |||
| Electrical Characteristics | |||||||
| Saturation voltage between collector and emitter | VCE(sat) | VD = VDB = 15V, VIN = 5V, IC =15A, Tj= 25C | V | 1.75 | 2.3 | ||
| Saturation voltage between collector and emitter | VCE(sat) | VD = VDB = 15V, VIN = 5V, IC =15A, Tj= 125C | V | 1.95 | |||
| FWD forward voltage | VF | VIN = 0VIC =-15A, Tj = 25C | V | 1.3 | 1.9 | ||
| Switching time | tON | VCC = 300V, VD = VDB = 15V, IC =15A, VIN = 0V-5V, inductive load | ns | 700 | |||
| Switching time | tC(ON) | ns | 250 | ||||
| Switching time | tOFF | ns | 800 | ||||
| Switching time | tC(OFF) | ns | 60 | ||||
| Switching time | trr | ns | 175 | ||||
| Turn-on loss | Eon | IC = 15A, VCC = 400V, VD=VDB = 15V,RG = 22, L = 1.0mH, Tj = 25C | uJ | 1200 | |||
| Turn-off loss | Eoff | uJ | 210 | ||||
| Collector to emitter leakage current | ICES | VCE= VCES, Tj= 25C | uA | 75 | |||
| Collector to emitter leakage current | ICES | VCE= VCES, Tj= 125C | uA | 1000 | |||
| VD Quiescent Current | ID | VD = 15V, VIN = 5V | mA | 1 | |||
| VDB Quiescent Current | IDB | VDB = 15V, VIN = 5V | uA | 550 | |||
| Fault output voltage | VFOH | Vsc = 0V, FO pin is pulled up to 5V through 10K resistor | 4.6 | V | |||
| Fault output voltage | VFOL | Vsc =1V, IFO=1.5mA | V | 0.5 | |||
| Short circuit forward trigger threshold | Vsc,TH+ | VD = 15V | V | 0.445 | 0.5 | 0.55 | |
| Power undervoltage protection control Trigger level | UVDD | V | 8.0 | 10.0 | 11.0 | ||
| Power undervoltage protection control Reset level | UVDR | V | 10.0 | 11.0 | 12.0 | ||
| Power undervoltage protection control Trigger level | UVDBD | V | 8.0 | 9.0 | 10.0 | ||
| Power undervoltage protection control Reset level | UVDBR | V | 9.0 | 10.0 | 11.0 | ||
| Fault output pulse width | TFO | uS | 65 | ||||
| Turn on threshold voltage | VIN(ON) | Applied between UP, VP, WP, UN, VN, WN and VNC | V | 2.3 | 2.6 | ||
| Turn-off threshold voltage | VIN(OFF) | V | 1 | 1.4 | |||
| Temperature output | VOT | Tc=90 | V | 2.63 | 2.77 | 2.91 | |
| Temperature output | VOT | Tc=25 | V | 0.88 | 1.13 | 1.39 | |
| Over temperature protection LVIC temperature | OTt | 120 | 130 | 140 | |||
| Over temperature protection hysteresis LVIC Hysteresis temperature | OTrh | 10 | |||||
| Built-in limiting resistance | RBSD | ohm | 75 | 90 | 105 | ||
| Recommended Operating Conditions | |||||||
| Power supply voltage | Vcc | Applied between P NU, NV, NW | V | 0 | 300 | 400 | |
| Control supply voltage | VD | Applied between VP1-VNC, VN1-VNC | V | 15 | |||
| Upper arm control power supply voltage | VDS | Applied between VUFB U, VVFB V, VWFB-W | V | 15 | |||
| Dead time | tdead | Corresponding to the input of each bridge arm | us | 1 | |||
| PWM frequency | fPWM | -20Tc +100, -20Tj+150 | kHz | 20 | |||
| Minimum input signal pulse width ON | us | 1 | |||||
| Minimum input signal pulse width OFF | us | 1 | |||||
| Junction temperature | Tj | -20 | 125 | ||||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina