Intelligent Power Module Jilin Sino-Microelectronics SPE05S60T-C for Small Power Motor Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Intelligent Power Module (IPM) - SPE05S60T-A/C

The SPE05S60T-A/C is an Intelligent Power Module (IPM) designed for small-power motor applications. It features compatibility with 3.3V and 5V MCUs, built-in bootstrap diode, undervoltage protection, and integrated temperature detection output. With an insulation withstand voltage of 1500V, this module is suitable for use in lampblack machines, fans, air purifiers, and dishwasher pumps.

Product Attributes

Brand: Jilin Huarui Microelectronics Co., Ltd.
Product Series: SPE05S60T-A/C
Halogen-Free: Available in Tube and Reel
Certifications: Not specified in text
Material: Not specified in text
Color: Not specified in text

Technical Specifications

Parameter	Symbol	Condition	SPE05S60T-A/C	Unit
Inverter Part
Collector emitter Voltage of Each IGBT	VCES		600	V
Each IGBT Current, Continuous	IC	TC= 25C	5	A
Each IGBT Pulse Current, Peak	ICP	TC= 25C, Less than 1mS	12	A
Maximum Power Dissipation	PC	TC = 25C, Each IGBT	23	W
Junction Temperature	TJ	Note1	-40~150	C
Control Part
Control Supply Voltage	VCC	Applied between VCC and COM	20	V
High-side Bias Voltage	VBS	Applied between VB and VS	20	V
Input Signal Voltage	VIN	Applied between VIN and COM	-0.5~VCC+0.5	V
Bootstrap Diode Part
Reverse Voltage	VRRMB		600	V
Forward Current	IFB	TC=25	0.5	A
Forward Current (Peak)	IFPB	TC=25, Less than 1mS	1	A
Total System
Self-protecting power supply voltage limit	VPN(PROT)	VCC=VBS=13.5V~16.5V, TJ=125C,	400	V
Module shell temperature	TC		-20~100
Storage Temperature	TSTG	TC=25	-40~125
Isolation Voltage	VISO	60Hz, Sinusoidal, AC 1 min, between pins and heat-sink plate	1500	V
Electrical Characteristics (TJ=25, Unless Otherwise Specified)
Inverter Part
Collector - emitter saturation voltage	VCE(SAT)	VD=VDB=15V, VIN=5V, IC=5A, TJ=25C	-1.95	V
FRD Forward voltage	VEC	VIN= 0V, IC=-5A	-1.6~2.0	V
Collector emitter leakage current	ICES	VCE=VCES, TJ=25C	-7.5	uA
Switching Times (Turn-on)	tON	VPN= 300 V, VD= VDB= 15 V, IC=5 A	800	nS
Switching Times (Turn-off)	tOFF	VIN= 0 V 5 V, Inductive Load	500	nS
Turn-on loss	Eon	IC = 5AVCC = 400VVD = VDB = 15VL=1mHTj= 25C	42~92	uJ
Turn-off loss	Eoff	IC = 5AVCC = 400VVD = VDB = 15VL=1mHTj= 25C	90~142	uJ
Control Part
Quiescent VCC Supply Current	IQCC	VCC=15V, VIN=5V	360~600	uA
Quiescent VBS Supply Current	IQB	VDB=15V, VIN=5V	64~120	uA
Low-Side Under-Voltage Protection Detection Level	UVCCD		7.2~9.2	V
Low-Side Under-Voltage Protection Reset Level	UVCCR		8.0~9.8	V
High-Side Under-Voltage Protection Detection Level	UVBSD		7.2~9.2	V
High-Side Under-Voltage Protection Reset Level	UVBSR		8.0~9.8	V
HVIC Temperature Sensing Voltage Output	VTS	VCC=15V, THVIC=25	0.6~1.2	V
Input ON Threshold Voltage	VIH		-2.9	V
Input OFF Threshold Voltage	VIL		0.8	V
Bootstrap Diode Part
Forward voltage	VFB	IF= 0.1 A, TC= 25C	-4.5	V
Reverse recovery time	trrB	IF= 0.1 A, TC=25C	80	ns
Recommended Operating Conditions
Supply Voltage	VPN	Between P and N	300~400	V
Control Supply Voltage	VCC	Between VCC and COM	13.5~16.5	V
High-Side Bias Voltage	VBS	Between VB and VS	13.5~16.5	V
Input ON Threshold Voltage	VIN(ON)	Between VIN and COM	2.8~VCC	V
Input OFF Threshold Voltage	VIN(OFF)		0~0.6	V
Blanking Time for Preventing Arm-Short	tded	VCC = VBS = 13.5 ~ 16.5 V, Tj 150C	1.0	us
PWM Switching Frequency	FPWM	Tj 150C	-20	KHz