High surge current LangJie 1N4007 diode with low forward voltage drop and performance in circuits

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The 1N4001 thru 1N4007 series are general-purpose rectifiers with a voltage range of 50 to 1000 Volts and a current rating of 1.0 Ampere. These diodes feature an OJ chip junction, low forward voltage drop, low leakage current, high forward surge capability, and high reliability. They are suitable for high-temperature soldering up to 260 for 10 seconds. The components are housed in a transfer-molded plastic case (DO-41) with UL94V-0 flame retardant epoxy and plated axial leads.

Product Attributes

Brand: CHANGZHOU LANGJIE ELECTRONICS CO.,LTD
Origin: China
Material: Transfer molded plastic, UL94V-0 rate flame retardant epoxy
Certifications: Solderable per MIL-STD-202E method 208C

Technical Specifications

Type Number	VRRM (Volts)	VRMS (Volts)	VDC (Volts)	I(AV) (Amp)	IFSM (Amps)	VF (Volts)	IR (A) TA=25	IR(AV) (A)	CJ (pF)	RJA (/W)	TJ,TSTG ()
1N4001	50	35	50	1.0	30	1.1	5.0	30	15	50	-55 to +150
1N4002	100	70	100
1N4003	200	140	200
1N4004	400	280	400
1N4005	600	420	600
1N4006	800	560	800
1N4007	1000	700	1000

Additional Electrical Characteristics

Parameter	Condition	Value	Unit
Maximum DC Reverse Current	TA = 125	50	A
Typical Junction Capacitance	Measured at 1.0MHz and applied reverse voltage of 4.0 Volts.	15	pF
Typical Thermal Resistance	Junction to Ambient at .375"(9.5mm)lead length, P.C. board mounted.	50	/W

Mechanical Data

Parameter	Value
Case	Transfer molded plastic
Epoxy	UL94V-0 rate flame retardant
Polarity	Color band denotes cathode end
Lead	Plated axial lead, solderable per MIL-STD-202E method 208C
Mounting position	Any
Weight	0.012ounce, 0.33 grams

Dimensions (DO-41)

Dimension	Inches	(Millimeters)
Diameter	.080 to .107	(2.0 to 2.7)
Length	.166 to .205	(4.2 to 5.2)
Lead Length (Min)	1.0	(25.4)
Lead Diameter	.021 to .027	(0.50 to 0.70)

Reflow Profile (Pb-Free Assembly)

Parameter	Condition	Value
Pre Heat Temperature Min.		+150C
Pre Heat Temperature Max.		+200C
Pre Heat Time	60-180 secs.
Average ramp up rate	(Liquidus Temp(TL) to peak)	3C/sec. Max.
Ramp-up Rate	TS(max) to TL	3C/sec. Max.
Reflow Temperature (TL)(Liquidus)		+217C
Time at Temperature (TL)		60-150 secs.
Peak Temp (TP)		+(260+0/-5 )C
Time within 5C of actual Peak Temp (TP)		25 secs.
Ramp-down Rate		6C/sec. Max.
Time 25C to peak Temp (TP)		8 min. Max.
Note	Do not exceed +260C