25 Ampere Bridge Rectifier LGE D25SB60 with 420 Volt RMS Reverse Voltage and Molded Plastic Material

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The D25SB60 is a 25A Glass Passivated Bridge Rectifier designed for high surge current capability up to 350 Amperes. It features low reverse leakage current and low forward voltage (VF) values, ensuring efficient operation. This rectifier is ROHS compliant and guaranteed for high-temperature soldering at 260+5/10. Its plastic material has a UL Flammability Classification of 94V-0.

Product Attributes

Brand: Not specified
Origin: Not specified
Material: Molded Plastic
Color: Not specified
Certifications: ROHS compliance, UL Flammability Classification 94V-0

Technical Specifications

Characteristic	Symbol	D25SB60	Unit	Notes
Peak Repetitive Reverse Voltage	VRRM	600	V	Working Peak Reverse Voltage, DC Blocking Voltage
RMS Reverse Voltage	VR(RMS)	420	V
Average Forward Rectified Output Current	Io	25	A	@TC= 100C, Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Non-Repetitive Peak Forward Surge Current	IFSM	350	A	8.3 ms single half sine-wave superimposed on rated load (JEDEC Method)
Forward Voltage (per element)	VFM	0.88 (typ) , 0.92 (max)	V	@ IF = 12.5A
Peak Reverse Current	IR	5.0 (@Tc = 25C at Rated DC Blocking Voltage) , 500 (@ Tc = 125C)	uA
l2t Rating for Fusing (t	l2t	508	A2s
Typical Junction Capacitance (per element)	Cj	85	PF	Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
Typical Thermal Resistance Junction to Case	RJ-C	1.0	C/W
Typical Thermal Resistance Junction to ambient	RJ-A		C/W
Operating and Storage Temperature Range	Tj, TSTG	-55 to+150	C
Dielectric Strength Terminal to case, AC 1 minuteIR1mA	Vdis	2.5	KV
Mounting Torque Max torque	Tor	8	Kgf.cm(3)	The proposed installation torque

Applications

Household Electric Appliances
Industrial power supply
Industrial automation equipment

Mechanical Data

Case: Molded Plastic
Polarity: Molded on Body
Mounting Position: Fixing the bridge rectifier with M3 screw to the heat sink. Coat silicon thermal compound between backside of the bridge, which will be contacted with the heat sink for maximizing heat transfer.
Weight: 6.8 grams (approx)