Product Overview
The FNC42060F / FNC42060F2 are advanced Motion SPM 45 modules designed to provide a fully-featured, high-performance inverter output stage for AC induction, BLDC, and PMSM motors. These modules optimize built-in IGBTs with gate drivers to minimize EMI and energy loss, while offering comprehensive protection features including undervoltage lockout, overcurrent protection, thermal monitoring, and fault reporting. The integrated high-voltage IC (HVIC) simplifies design by requiring only a single power supply and converting logic-level gate inputs into high-voltage, high-current drive signals for the internal IGBTs. Independent IGBT negative terminals per phase support a wide range of control algorithms.
Product Attributes
- Brand: ON Semiconductor (formerly Fairchild Semiconductor)
- Certifications: UL E209204 (UL1557)
- Series: Motion SPM 45
Technical Specifications
| Device | Package | Type | Voltage (V) | Current (A) | Switching Frequency (kHz) | Thermal Resistance (C/W) |
| FNC42060F | SPMAA-A26 | 3-Phase IGBT Inverter Module | 600 | 20 | 5 | Rth(j-c)Q: 2.5 (IGBT), Rth(j-c)F: 3.6 (FWD) |
| FNC42060F2 | SPMAA-C26 | 3-Phase IGBT Inverter Module | 600 | 20 | 5 | Rth(j-c)Q: 2.5 (IGBT), Rth(j-c)F: 3.6 (FWD) |
| Parameter | Symbol | Condition | Min | Typ | Max | Unit |
| Collector-Emitter Voltage | VCES | | | | 600 | V |
| Collector Current (Single IGBT) | IC | TC = 25C, TJ < 150C | | | 20 | A |
| Collector Current (Peak) | ICP | TC = 25C, TJ < 150C, Pulse Width < 1 ms | | | 40 | A |
| Collector Power Dissipation | PC | TC = 25C, Single Chip | | | 50 | W |
| Junction Temperature | TJ | | -40 | | 150 | C |
| Control Supply Voltage | VCC | VCC(H), VCC(L) - COM | | | 20 | V |
| High-Side Control Bias Voltage | VBS | VB(U) - VS(U), etc. | | | 20 | V |
| Input Signal Voltage | VIN | IN Pins - COM | -0.3 | | VCC + 0.3 | V |
| Short Circuit Trigger Level | VSC(ref) | VCC = 15 V | 0.45 | 0.50 | 0.55 | V |
| Isolation Voltage | VISO | 60 Hz, Sine Wave, AC 1 min | | | 2000 | Vrms |
| Parameter | Symbol | Condition | Min | Typ | Max | Unit |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VCC = VBS = 15 V, VIN = 5 V, IC = 20 A, TJ = 25C | | 1.85 | 2.35 | V |
| FWD Forward Voltage | VF | VIN = 0 V, IF = 20 A, TJ = 25C | | 1.95 | 2.45 | V |
| High-Side Turn-on Time | HS tON | VPN = 300 V, VCC = VBS = 15 V, IC = 20 A, TJ = 25C, Inductive Load | | 0.45 | 1.25 | s |
| High-Side Turn-off Time | HS tOFF | VPN = 300 V, VCC = VBS = 15 V, IC = 20 A, TJ = 25C, Inductive Load | | 0.70 | 1.20 | s |
| Low-Side Turn-on Time | LS tON | VPN = 300 V, VCC = VBS = 15 V, IC = 20 A, TJ = 25C, Inductive Load | | 0.45 | 1.25 | s |
| Low-Side Turn-off Time | LS tOFF | VPN = 300 V, VCC = VBS = 15 V, IC = 20 A, TJ = 25C, Inductive Load | | 0.75 | 1.25 | s |
