1. Control system

 Taiwan veron 7-inch color touch screen, programmable controller,

2. Driving mode

 original Japanese gear belt;

3. Test travel

 0-10 meters, that is, the moving distance of the test piece is 0-5 meters, and the maximum moving distance of the slide table is 5 meters;

4. Cable clamp bending radius

 cable drag chain bending radius:  25mm, 50mm, 75mm, 100mm arbitrary adjustment;(different sizes of drag chains are required)

5. Test speed

 0-8m/S (fastest linear speed) 0-100 times/min (the fastest speed can reach 100 times/min for small trips)

6. Test acceleration

 0-40m/S

7. Test station

 2 stations, each station shall be placed within the range of W250mm (the length of each station shall be the width of the chain clip × the number of stations shall be less than 250mm), and the total mass shall be no more than 10kg;

8. General counter

 1~999999999 set at will, and stop when the count reaches the set value;

9. Sub-counter

 each station counts independently from 1 to 999999999 continuously;

10. Alarm detection

 detection of line core breakage, with sound and light alarm warning sound;

11. Internal resistance testing

 It can switch internal resistance testing without stopping the machine (equipped with 10 test interfaces and optional internal resistance tester)

12. Working power supply

Three phases AC380V±10%, 50HZ, 15A;

13. External dimensions

about W6000mm×D750mm×H1500mm

14. Weight

about 350kg