Denim Mules with Distressed Patchwork | Source Factory Supply
A closed-toe mule in denim, built on a molded sole. Small woven patches are scattered across the upper with their edges left raw, and one strap crosses the vamp on a rectangular buckle. Three washes: light blue, black and navy.
Product Overview
| Item Number | AA-020-YYX-21790+A1 |
| Style | Closed-toe mule, backless, slip-on |
| Upper | Denim fabric with scattered woven patches, edges left raw |
| Closure | Single vamp strap on a rectangular metal buckle, adjustable |
| Footbed | Tan, suede-look surface, stitched rim |
| Sole | Molded PVC, flat, dark |
| Size Range | EU 36-41 |
| Colorways | 3 washes: light blue denim, black denim, navy denim |
| MOQ | 1,800 pairs per order, one size range and up to three colors |
Key Design Features
1. Denim upper, molded sole. This is a fabric upper on a PVC base, not an all-molded pair. The denim is what lets the shoe sit next to apparel instead of next to beach sandals, and that is where the margin usually is.
2. Scattered patch layout with raw edges. Small woven patches in pink, green and orange are set across the vamp and side, each with a frayed edge. The fraying is part of the finish, not wear and not a defect, which matters at inspection and matters again when a customer opens the carton.
3. Single strap, rectangular buckle. One strap crosses the vamp on a plain rectangular buckle. On a backless mule the strap is the only thing holding the foot in, so it has to adjust far enough to cover a wide and a narrow foot on the same size.
4. Closed toe, open back. The toe box keeps the foot covered; the back is open so the pair goes on without hands. That combination is what carries the style from spring into autumn, where an open sandal stops selling.
5. Stitched footbed rim. A visible stitch line runs the edge of the footbed over a tan suede-look surface. It is a finish detail, but it is the one that separates this pair from a plain molded clog at a glance.
6. Three denim washes. Light blue, black and navy. All three are cut from the same pattern, so the color range does not change the cost structure.
Factory Strength
| Footwear Since | 2006, Wuchuan, Guangdong |
| Plant Area | 30,000 square meters |
| Workforce | 500+ workers |
| Monthly Capacity | 3,000,000 pairs |
| Export Markets | 100+ countries |
| Fray Allowance Spec | Written into the inspection sheet so a raw edge is not read as a defect |
| Patch Placement | Laid to a template, with an agreed tolerance because the layout scatters |
| Defect Rate | Below 0.5 percent on shipped orders |
Why Importers Choose This Product
It sells from a different shelf. A denim mule can sit in an apparel department next to jeans. That is a second placement for the same SKU, and it reaches customers who never walk down the sandal aisle.
The season runs longer. Closed toe means the pair keeps selling after open sandals are marked down. For a buyer, that is a longer full-price window on the same order.
One mold, three washes. Light blue, black and navy share a pattern and a sole. The color spread costs nothing extra in tooling.
Patch variation is disclosed up front. Every pair scatters slightly differently. We state the tolerance in writing so there is no argument at inspection about which pair was "right".
Adjustable on a backless fit. The strap takes up the difference between a wide and a narrow foot, which is what keeps a mule from being returned for slipping off.
Fabric upper, molded price. The denim carries the look; the PVC sole carries the cost. That combination is why the pair can be priced above a basic sandal without a premium bill of materials.
Product Specifications
| Item Number | AA-020-YYX-21790+A1 |
| Upper Material | Denim fabric, patch detail with raw edges |
| Lining | Soft fabric lining at the vamp |
| Outsole | Molded PVC, flat |
| Closure | Rectangular metal buckle on a single strap |
| Toe Shape | Closed, rounded |
| Size Range | EU 36-41 |
| Weight | Approx. 400 g per pair, confirmed against your spec on order |
| Colors | Light blue denim, black denim, navy denim |
| Logo | Custom, debossed or printed on the footbed |
| MOQ | 1,800 pairs |
| Lead Time | 15-25 days after sample approval |
| Trade Term | EXW |
| Payment | T/T, 30 percent deposit, 70 percent before shipment |
Customization Options
| Denim Wash | Open to your color card, subject to mill minimums on custom washes |
| Patch Palette | Can be matched to your seasonal colors |
| Buckle Finish | Silver as standard, other plating quoted separately |
| Logo | Debossed or printed on the footbed, or on a woven label on the strap |
| Size Range | 36-41 as standard, other ranges quoted separately |
| Packaging | Poly bag, hang tag, printed box or barcode label to your artwork |
Container Order Information
| Carton | Standard export carton, count confirmed per order |
| 20GP | Quoted against your pack size and color split |
| 40HQ | Quoted against your pack size and color split |
| Mixed Loads | Mixed size ranges and colors accepted within the MOQ |
| Loading Plan | Issued with the order confirmation |
Quality Control
| Fray Standard | Raw edge held to an agreed allowance, written on the inspection sheet |
| Patch Attachment | Stitched patches pulled by hand on sampled pairs |
| Patch Placement | Checked against the layout template within the agreed tolerance |
| Buckle | Prong and frame checked for free movement and plating tone |
| Footbed | Rim stitch line checked for skips, surface checked for shade match |
| Final Inspection | AQL 2.5 on packed cartons, defect rate below 0.5 percent |
Product Image
Three denim washes. The light blue pair shows the patch scatter and the raw edges at full size.
Factory Overview
| Company | Guangdong Chongdi Shoes Co., Ltd. |
| Established | 2006 |
| Location | Wuchuan, Guangdong, China |
| Plant Area | 30,000 square meters |
| Workforce | 500+ workers |
| Monthly Capacity | 3,000,000 pairs |
| Export Markets | 100+ countries |
| Main Lines | PVC injection, EVA molding, fabric upper stitching and assembly |
Recommended Markets
| Europe | Denim reads as everyday apparel; light blue leads |
| North America | Autumn extension on a summer program |
| Middle East | Indoor and mall wear, closed toe preferred |
| East Asia | Denim wash programs, black and navy first |
| Latin America | Apparel-adjacent placement in department stores |
Packaging
| Standard | One pair per poly bag, sized and assorted to your ratio |
| Hang Tag | Available to your artwork |
| Printed Box | Quoted separately by size |
| Barcode | Applied per style and size on request |
| Carton Marking | Printed to your shipping marks |
Frequently Asked Questions
What is the minimum order quantity?
1,800 pairs per order. That covers one size range and up to three colors.
Are samples available before ordering?
Yes. Sample pairs are made to your wash, patch palette and logo, and the sample fee is refundable against the bulk order.
How long does production take?
15 to 25 days after sample approval, depending on quantity and color split.
Is the frayed edge a defect?
No. The raw edge is part of the design. We hold it to an agreed allowance and write that allowance on the inspection sheet so it is not culled as a fault.
Will every pair look identical?
No. The patches scatter, so no two pairs are identical. We work to a layout template with an agreed tolerance, and we state the tolerance in the order confirmation.
Is the upper real denim?
The upper is denim fabric. Weight and mill can be specified on order; tell us what handle you want and we will quote to it.
Can the patch colors be changed?
Yes. The patch palette can be matched to your seasonal colors, subject to minimums on custom weaving.
How many washes are there?
Three: light blue denim, black denim and navy denim. All three are cut from the same pattern.
Can I add a fourth wash?
Custom washes are possible and are quoted separately because they carry a mill minimum.
What sizes do you make?
EU 36-41 as standard. Other ranges can be quoted.
How much does one pair weigh?
Approximately 400 g. We confirm the exact figure against your specification before production.
Is the strap adjustable?
Yes. The buckle takes up the difference between a wide and a narrow foot on the same size, which is what keeps a backless mule from slipping off.
Can we add our logo?
Yes. Debossed or printed on the footbed, or on a woven label on the strap. Artwork is approved before production.
Is the footbed cork?
The footbed has a tan suede-look surface with a stitched rim in the cork-shoe style. If you need a specific construction, tell us and we will quote it as specified.
How do I clean a denim upper?
Spot clean with a damp cloth and mild soap. Do not machine wash, and do not tumble dry.
Will the denim bleed onto socks?
Indigo can transfer before the first wash. If your market wears these with light socks, ask for a rinse wash and we will quote it.
Does the denim upper come off the sole?
The upper is attached to the sole in a bonded and stitched assembly. Bond strength is checked by sample on every batch.
Is it suitable for daily wear?
Yes. It is a slip-on mule built for everyday use, not a seasonal display piece.
Can I mix washes in one container?
Yes, within the MOQ and the size range.
What is the payment term?
T/T, 30 percent deposit and 70 percent before shipment.
What is the trade term?
EXW. Other terms can be discussed.
Do you check quality before shipment?
Yes. AQL 2.5 on packed cartons, with the defect rate held below 0.5 percent on shipped orders.
How many pairs fit in a container?
It depends on your pack size and wash split. Send us the details and we will return a loading plan.
How long have you been exporting?
Since 2006, to more than 100 countries.
Inquire for Container Load Pricing
Send your size range, wash split and target market. We will reply with a quotation and a loading plan.
Contact form: www.chongdislippers.com/contactnow.html