15 Ton Aluminum Melting Furnace Natural Gas / Heavy Oil Aluminium Furnace Machine
Price:
USD 120,000
MOQ:
1 set
Delivery Time:
60 days
Brand:
Bolv
Product Description
Natural gas or heavy oil aluminum melting furnace 15tons
Product introduction
This 15-ton melting unit acts as the key frontline equipment to supply qualified molten aluminum for downstream casting machines. Prior to charging, raw aluminum ingots and recycled aluminum scraps are blended in a predefined proportion. The compound materials are then delivered and loaded into the furnace by forklifts or manual work.
Once feeding work is finished, operators activate the regenerative heating system to melt the mixed raw materials. During the melting cycle, staff carry out dross removal and material homogenization around the furnace outlet. When the molten alloy rises to the preliminary working temperature, on-site personnel conduct basic component adjustment and secondary slag cleaning. Meanwhile, they fine-tune the liquid temperature to meet primary production standards.
After further heating to the target value, the molten metal goes through a series of rigorous procedures, including precise ingredient calibration, complete dross elimination and deep alloy refining. The integrated combustion system works continuously to stabilize the temperature of molten aluminum within the required range.
Only the molten alloy that fully complies with all technical specifications can be transferred to the subsequent casting procedures for mass production.
Parameters
| Furnace Construction | Stationary rectangular heating furnace |
| Molten aluminum working temperature scope | 720℃—760℃ |
| Max allowable temperature inside furnace cavity | 1050℃—1100℃ |
| Inclination angle of the base connecting furnace door | 30º |
| Liquid aluminum discharge mode | Manually operated draining outlet |
| Number of draining tap | 1 |
| Inner diameter of tapping port | Φ60 |
| Number of burner | 2 |
| Burner specification | Heat regenerative combustion device |
| Combustion medium | Pipeline natural gas |
| Fuel pressure | 0.15-0.2Mpa (Manufacturer’s pipe network pressure) |
| Fuel heat value | 8400Kpa / m3 |
| Maximum capacity of burner | 300 –400m3/ h |
| Burner’s ignition | Electric spark ignites natural gas pilot burner |
| Flame safety protection | Automatic detection of pilot burner’s ultraviolet detector |
FAQ
What are the requirements for civil engineering foundation?
The foundation shall be poured with C30 concrete with a thickness of no less than 200mm. Reserve embedded parts and pipelines. Sufficient maintenance space shall be reserved around the furnace.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Foshan Henghui Aluminum Innovation International Trade Co., Ltd.
Location
D12, Zone D, 3F, Comprehensive Building, Beside Yongkou Archway, Pingliu Road, Xiadong Community, Guicheng Subdistrict, Nanhai District, Foshan
Contact Person
Huang