8-12 Boxes/Min Automatic Packaging Machine for Flooring and Panels

Designed for modern flooring factories, this 8-12 Boxes/Min Automatic Packaging Machine combines product handling, carton packing, sealing, and conveying into one coordinated end-of-line system.

The standard machine handles products measuring 500-1000 mm in length, 300-600 mm in width, and 25-80 mm in packed height. With a packaging capacity of up to 8-12 boxes/min, it is suitable for factories producing SPC flooring, LVT flooring, WPC flooring, laminate products, decorative boards, and other suitable flat materials.

The equipment uses 28 kW installed power with a standard supply of 380V / 50Hz. Instead of relying on one fixed standard design, the production layout can be engineered according to each customer’s product specifications, carton style, line speed, workshop space, and connection requirements.

The result is a more organized packaging process with fewer manual transfer points and better compatibility with modern automated production lines.

Production equipment in flooring factories is becoming increasingly automated.

Extrusion machines can operate continuously.

Profiling machines can process flooring at high speed.

Inspection systems can automatically detect surface defects.

However, in many factories, workers are still manually handling finished products at the packaging stage.

This creates an imbalance between manufacturing and packing.

Typical symptoms include:

• Finished flooring accumulating before packaging

• Large numbers of workers concentrated in one area

• Frequent manual lifting

• Slow carton preparation

• Different packing speeds for different operators

• Packaging errors during busy shifts

• Difficulty increasing total factory capacity

Adding more workers can provide temporary improvement, but it does not fundamentally solve the process limitation.

Automatic packaging creates a more scalable solution.

Our packaging system is designed around the entire product flow rather than only the carton sealing operation.

The system receives finished products from the previous machine and creates a controlled transfer path through the complete packaging cycle.

Products are detected, positioned, and grouped.

Packaging material is prepared.

Products are transferred into the carton.

The carton is closed and sealed.

Finished boxes are then moved toward the next automated process.

Depending on the factory requirement, the line can be extended with:

• Automatic labeling

• Barcode printing

• Weight inspection

• Metal detection

• Vision inspection

• Robotic palletizing

• Pallet conveyor systems

• Automatic stretch wrapping

• Warehouse transfer conveyors

This modular approach allows customers to start with automatic packaging and expand automation later.

Technical data may be adjusted according to the final project requirements.

SPC Flooring Packaging Line

The machine can be installed after SPC cutting, profiling, beveling, inspection, or stacking equipment.

Luxury Vinyl Tile Packaging

LVT products can be automatically organized and transferred into cartons, reducing repeated handling.

WPC Flooring Production

For WPC lines, the machine can provide a stable connection between production and finished-goods handling.

Laminate Flooring

It is suitable for manufacturers requiring repeatable packaging output and multiple product recipes.

Panel Packaging

Decorative boards and selected flat building materials can also be evaluated based on product dimensions and surface condition.

Turnkey Automation Projects

For new production plants, the machine can be incorporated into a complete automated factory layout.

1. Stage 1 – Receive the Product

   Products enter from the previous process through a controlled conveyor.

2. Stage 2 – Detect and Align

   Sensors monitor product position while guide mechanisms keep the stack aligned.

3. Stage 3 – Build the Required Pack

   The machine prepares the specified number of flooring pieces for one box.

4. Stage 4 – Prepare Packaging Material

   Carton material is supplied and positioned for the next cycle.

5. Stage 5 – Load the Product

   The product pack is transferred smoothly into the packaging area.

6. Stage 6 – Close the Carton

   Mechanical structures fold and form the carton around the product.

7. Stage 7 – Seal the Package

   Hot-melt glue or another suitable sealing system secures the box.

8. Stage 8 – Move to the Next Process

   Finished cartons are discharged automatically for additional handling.

• Flexible Product Range

  One system can accommodate several product sizes within the defined dimensional range.

• Production Recipe Management

  Operators can select recipes corresponding to different flooring specifications.

• Continuous Line Operation

  Automatic transfer reduces interruptions between manufacturing and packaging.

• Reduced Operator Intervention

  Workers can focus more on supervision, material replenishment, and quality control instead of repetitive lifting.

• Integration-Friendly Design

  The system can communicate and physically connect with upstream and downstream equipment.

• Custom Factory Layout

  Straight-line, angled, or other conveyor arrangements can be evaluated according to available space.

• International Project Configuration

  Electrical systems, documentation, guarding, and component brands can be selected according to project and regional requirements.

A successful packaging project begins with accurate production information.

Confirm Product Range

Do not provide only your most common product.

Send both minimum and maximum dimensions.

Confirm Packaging Format

Different cartons require different machine structures.

Please provide:

• Carton drawing

• Material type

• Folding method

• Sealing method

• Finished box dimensions

Confirm Capacity

The standard machine reaches approximately 8-12 boxes/min, but the full line must also match the upstream production capacity.

Confirm Product Flow

Tell us whether products arrive individually, in groups, stacks, or from an existing conveyor.

Confirm Factory Space

A simple workshop layout can help avoid installation conflicts later.

Confirm Future Plans

If you plan to add automatic palletizing or warehouse conveying later, this should be considered during the initial layout design.

What products are suitable for this packaging line?

The machine is mainly intended for SPC, LVT, WPC, laminate flooring, and compatible flat products within the specified dimensional range.

Is 8-12 boxes/min the guaranteed output?

It is the standard design range. Final actual output depends on carton type, product quantity, feeding stability, and project configuration.

Can you customize the conveyor direction?

Yes. Conveyor orientation and machine arrangement can be designed around the customer’s workshop.

Is hot-melt glue sealing available?

Yes. Hot-melt sealing can be included where suitable for the carton design.

Can the packaging line be connected to a robot?

Yes. The output conveyor can connect with robot palletizing and other automatic downstream systems.

Instead of selecting a machine only from a catalog, send us your actual production information.

Please provide:

• Product dimensions

• Packaging quantity

• Carton dimensions

• Carton drawing

• Required production capacity

• Current packing process

• Workshop layout

• Upstream machine information

• Downstream automation requirements

Based on these details, we can recommend a more suitable packaging layout and prepare a technical quotation.