Ore Beneficiation Equipment for Mineral Processing and Flotation
Ore beneficiation equipment is used to separate and concentrate valuable minerals from mined ore during mineral processing. Depending on ore characteristics, beneficiation may involve different separation methods. For ores suitable for froth flotation, XCF II and KYF II flotation cells can be configured for roughing, scavenging and cleaning operations.
Available cell volumes range from 1 m³ to 160 m³, with equipment selection based on ore properties, processing capacity and flotation process requirements.
A mineral processing route may include:
- Raw Ore → Crushing → Grinding → Classification → Conditioning → Flotation → Concentrate / Tailings
After the ore is ground and conditioned, flotation can be used as a separation method when it is suitable for the mineral characteristics. The actual beneficiation process should be determined according to the ore properties and mineral processing test results.
For flotation-based mineral separation in mineral processing plants.
Suitable for different stages of the flotation circuit according to process requirements.
XCF II provides slurry suction capability, while KYF II operates without slurry suction.
Multiple cell volumes are available for different processing requirements.
The XCF II/KYF II series can be used for flotation of suitable:
- Non-Ferrous Metal Minerals
- Ferrous Metal Minerals
- Non-Metallic Minerals
Flotation suitability and process configuration should be determined according to ore characteristics and mineral processing test results.
| Parameter | Specification |
|---|---|
| Equipment Type | Flotation Machine / Flotation Cell |
| Series | XCF II / KYF II |
| Effective Cell Volume | 1-160 m³ |
| Feed Particle Size | 0.3-0.01 mm |
| -0.074 mm Fraction | >50% |
| Air Volume | 0.05-1.4 m³/m²*min |
| Flotation Stage | Roughing / Scavenging / Cleaning |
| Application | Ore Beneficiation / Mineral Processing |
The values above are based on the supplied XCF II/KYF II equipment specifications. Individual model parameters vary by cell volume and configuration.
The selection depends on the flotation circuit:
- XCF II can be selected where slurry suction is required
- KYF II is used without slurry suction
- The two types can also be combined within a flotation stage
For equipment selection, the flotation flowsheet and required processing capacity should be considered together.
If you are planning an ore beneficiation project but are not sure which flotation equipment is required, please provide the following information:
If available, a mineral analysis report or flotation test report can also be provided for equipment selection.
Y &X Beijing Technology Co., Ltd. provides flotation equipment, flotation machine spare parts and related equipment for mineral processing applications.
Equipment selection and configuration support can be provided according to ore characteristics, processing capacity and flotation process requirements.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.