Adjustable Gold Ore Flotation Machine For Multi Stage Gold Beneficiation Processing
The Gold Ore Flotation Machine provides a configurable flotation solution for gold ore beneficiation processes where froth flotation is applicable. The flotation cells can be arranged according to the required beneficiation stages, processing conditions and plant flowsheet, supporting continuous flotation operations in mineral processing plants.
Gold ore flotation may involve multiple separation stages depending on the beneficiation process. The flotation equipment can be configured for:
- Roughing - Initial flotation separation of valuable minerals from the feed
- Scavenging - Further treatment of material from the preceding flotation stage
- Cleaning - Further flotation of concentrate for additional separation
The number and arrangement of flotation cells can be selected according to the actual beneficiation flowsheet rather than using a fixed configuration. The equipment supports XCF II/KYF II use in roughing, scavenging and cleaning operations.
Flotation cells can be configured according to the required roughing, scavenging and cleaning stages.
Cell quantity and arrangement can be selected according to the beneficiation flowsheet and plant layout.
The independent air supply system allows the air volume to be adjusted according to flotation operating requirements.
XCF II and KYF II pneumatic mechanical flotation cells can be combined according to process requirements. XCF II provides slurry suction capability, while KYF II operates without slurry suction. This allows the two cell types to be arranged according to their required positions in the flotation circuit.
| Parameter | Specification |
|---|---|
| Feed Particle Size | 0.3-0.01 mm |
| −0.074 mm Fraction | Approximately 50%-90% |
These values represent the stated applicable feed range of the flotation equipment. Actual grinding fineness and flotation conditions should be determined according to the ore characteristics and beneficiation process.
For equipment selection, please provide the following information:
- Ore Characteristics
- Processing Capacity
- Feed Particle Size
- Pulp Conditions
- Beneficiation Flowsheet
- Required Flotation Stages
Based on these conditions, the flotation cell model, quantity and circuit arrangement can be selected according to project requirements.
Yes. The flotation cells can be arranged for roughing, scavenging and cleaning according to the beneficiation flowsheet.
Ore characteristics, processing capacity, feed particle size, pulp conditions and beneficiation flowsheet are recommended for flotation equipment selection.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.