Brass Solenoid Valve

2L-40 US-40 Uni-D Type Steam Brass Solenoid Valve 1 1/2' 24V 220V 2L / US series high temperature hot water and steam solenoid valves are generally either Brass or Stainless Steel body with PTFE seals suitable for temperatures up to +180℃ or a maximum steam pressure or 8 Bar. High temperature solenoid valves are controlled by a solenoid coil which is basically an electric magnet or copper wire wound around a bobine (a bit like a cotton reel) so when electricity is passed

2L-25 US-25 Uni-D Type Steam Control Solenoid Valve 1' 24VDC 220VAC The 2L series solenoid valve is a well proven 2 port 2 way pilot piston design. The 2L series is normally closed and has been designed to control high temperature water and steam up to 185 degrees C. Steam Solenoid valves are usually used in boiler and heating systems which require valves with PTFE seals (Rated up to 180 Deg C) and Solid Servo Metal Pistons instead of rubber diaphragms that has limited

2L-20 US-20 Uni-D Type Hot Water And Steam Solenoid Valve 3/4' 24V 220V 2L series piston pilot operated steam solenoid valve, it is 2 way normally closed. It is high temperature can up to -5 to 185° C, so mostly for steam medium, we also call it steam valve. It is designed correspondingly to support higher pressure of 1.5MPa, the orifice also will be bigger than normal valve for same thread size to make larger flow rate. It can change the solenoid coils to be as explosion

2L-15 US-15 Uni-D Type Brass Steam Solenoid Valve 1/2' 24VDC 220VAC​ Economical price general purpose solenoid valve, designed for steam, water and air, two-way two-position (2/2 way), normally closed (N/C), pison pilot operated, brass body and PTFE seal, able to handle fluid at high temperature up to 180℃, selectable voltage 12VDC, 24VDC, 110VAC or 220VAC, port sizes available for 1/2', 3/4', 1', 1 1/4', 1 1/2' and 2' inches. Main Dimension of Steam Solenoid Valve: US Series

2V130-15 Airtac Type Brass Solenoid Valve 1/2' 12VDC 24VDC 110VAC 220VAC 2V130 and 250 Series 1.This 2/2 way diaphragm piloted solenoid valve has low energy consumption and large air flow. 2.The starting pressure is low and the operational differential pressure is < 0.05MPa. 3.The valve body is made of brass which is heat resistant and the coil conforms to Class B classification. The seals are made of NBR. Main Dimension of 2V Series Brass Solenoid Valve: Model A AB AC B C CA

AC110V DC24V 1/4' 1/8' Inch Thread 3 Way 6014 Brass Solenoid Valve The Type 6014 is a direct-acting solenoid valve system with a brass body. For neutral gases and liquids such as compressed air, natural gas, water and hydraulic oil & Technical vacuum. 1. Port Connection: 1/8', 1/4', sub-base 2. Body Material: Brass 3. Seal Material: NBR, FKM, PTFE, EPDM 4. Pressure: 0 to 16 Bar 5. Media temperature ranges covering -10°C to +150°C Bottom plate installation When installing the

AC220V DC24V 1/4' Inch 6013 NC Direct Acting Plunger Solenoid Valve Features of 6013 Brass Solenoid Valve: 1.Type 6013 is a general-purpose valve used for shut-off, filling, dosing and ventilation. 2.The compact valve is suitable for small flow rates, the nominal diameter lies between 2 and 6 mm. 3.The maximum pressure varies from 0.75 up to 25 bars, depending on the orifice size and coil. Because of the direct acting design, the valve can be used in systems without a

1-1/2' Inch Threaded UW-40 2W400-40 2/2 Way NC Brass Solenoid Valve The 2W400-40 solenoid valve is brass valves two-way, semi-direct lift valve that operates in a normally closed position.This means that there are two ports in which the medium flows and the valve will open to allow the medium to pass when the coil is energized. 2 / 2 Way G1-1/2 Inch Normal Close Type Operated Brass Solenoid Valve 2W400-40.High quality electric solenoid valve, for water, air or oil. It's

1-1/4" Inch UW-35 2W350-35 Semi Diaphragm Brass Flow Control Valve​ The valve below is UW-35 Uni-D Type Water Treatment Solenoid Valve 2W350-35. 2W350-35 is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve, for Water, Air, Oil and Gas. Able to be operated directly under low pressure. Solenoid valves consist of a coil, plunger and sleeve assembly. A plunger opens or closes the orifice by raising or lowering within a sleeve tube

UD-10 2W040-10 3/8' Inch 2/2 Way NC Flow Control Solenoid Valve Power:Solenoid Media:Water Port Size:3/8' Structure:Diaphragm Function:2/2 Way Normally Closed Operation Type:Direct Acting, Semi-Direct Operated Valve Body Material:Brass, Stainless Steel 304 Diaphragm Material:NBR, FKM and EPDM Pressure Range:0 to 1.0 Mpa Temperature Range:-5 to +100 ℃ Voltages:24V DC, 110V AC, 120V AC, 220V AC, 230V AC, 240V AC 2W Series Model No:2W025-08, 2W040-10, 2W160-15, 2W200-20, 2W250

UD-08 2W025-08 1/4' Inch Direct Acting Brass Solenoid Valve Power:Solenoid Media:Water Port Size:1/2' Structure:Diaphragm Function:2/2 Way Normally Closed Operation Type:Direct Acting, Semi-Direct Operated Valve Body Material:Brass, Stainless Steel 304 Diaphragm Material:NBR, FKM and EPDM Pressure Range:0 to 1.0 Mpa Temperature Range:-5 to +100 ℃ Voltages:24V DC, 110V AC, 120V AC, 220V AC, 230V AC, 240V AC 2W Series Model No:2W025-08, 2W040-10, 2W160-15, 2W200-20, 2W250-25,

1-1/4" Inch Semi-Diaphragm UW-35 SUW-35 Flow Control Solenoid Valve The valve below is UW-35 Uni-D Type Water Treatment Solenoid Valve 2W350-35. 2W350-35 is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve, for Water, Air, Oil and Gas. Able to be operated directly under low pressure. Solenoid valves consist of a coil, plunger and sleeve assembly. A plunger opens or closes the orifice by raising or lowering within a sleeve tube

3/8' Inch Brass UD-10 Stainless Steel SUS-10 Solenoid Valve Power:Solenoid Media:Water Port Size:3/8' Structure:Diaphragm Function:2/2 Way Normally Closed Operation Type:Direct Acting, Semi-Direct Operated Valve Body Material:Brass, Stainless Steel 304 Diaphragm Material:NBR, FKM and EPDM Pressure Range:0 to 1.0 Mpa Temperature Range:-5 to +100 ℃ Voltages:24V DC, 110V AC, 120V AC, 220V AC, 230V AC, 240V AC 2W Series Model No:2W025-08, 2W040-10, 2W160-15, 2W200-20, 2W250-25,

1/4' Inch Direct Acting NC UD-8 SUS-8 Water Brass Solenoid Valve 2W025-08 Normal Closed (N/C) Electric Solenoid Valve Is Constructed With Brass Body;standard seal material defaults to Nitrile rubber,suitable for a variety of working media. Used to control the direction, flow, speed of medium in industry. This 220V AC brass electric solenoid valve easily replaces broken valves for use with water, air, and gas (viscosity≤20cst). This unit fits a 1/4" NPT thread. 1.This 220V AC

12VDC 16W Solenoid Coil For CNG LPG Pressure Reducer Spare Part This 12VDC 16W solenoid coil is popularly used in CNG reducer. The CNG fuel system releases high-pressure gas from the fuel tank and transfers it through the fuel lines. The pressure regulator reduces the pressure, which is compatible with the engine fuel injection system. Then, CNG transfers to the combustion or manifold chamber, mixing with air. The spark plug ignites the compressed gas and starts the engine.

Type 6013 2/2 Way NC Direct Acting Air Compressor Solenoid Valve Burkert type normally closed 6013 solenoid valve is a 2/2 direct-acting plunger solenoid valve. Used directly with brass body. Suitable for neutral gases and liquids such as compressed air, natural gas, water, hydraulic oil and technical vacuum. The modular design allows the sleeve body to be used as a single valve, mount the flange body on a manifold, and integrate the valve seat into a custom terminal body.

2' Inch UW-50 2W500-50 Semi Diaphragm Water Solenoid Valve 2W500-50 Solenoid Valve are widely used in medical machinery, cleaning equipment, food machinery, burner, welding and cutting, fire safety, environmental protection, water treatment, machinery manufacturing and other industries. 2" Inches Brass Electromagnetic Valve, 2 Position 2 Way Noraml Close Drive acting. 2W500-50 2W: 2 Positon 2 Way Solenoid Valve. Solenoid valve has 2 pipe connections, an inlet called the

1-1/2' Inch UW-40 2W400-40 Pilot Diaphragm Brass Solenoid Valve The 2W400-40 solenoid valve is brass valves two-way, semi-direct lift valve that operates in a normally closed position.This means that there are two ports in which the medium flows and the valve will open to allow the medium to pass when the coil is energized. 2 / 2 Way G1-1/2 Inch Normal Close Type Operated Brass Solenoid Valve 2W400-40.High quality electric solenoid valve, for water, air or oil. It's

1-1/4" Inch UW-35 2W350-35 Brass Water Air Control Solenoid Valve The valve below is UW-35 Uni-D Type Water Treatment Solenoid Valve 2W350-35. 2W350-35 is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve, for Water, Air, Oil and Gas. Able to be operated directly under low pressure. Solenoid valves consist of a coil, plunger and sleeve assembly. A plunger opens or closes the orifice by raising or lowering within a sleeve tube

1" Inch UW-25 2W250-25 Direct Acting Water Brass Solenoid Valve This is Operated NC G1' Female Thread Solenoid Valve AC 220V Two Position Two Way. Water solenoid valve is suitable for water or liquid as the working medium, can automatically control or remote control of water, oil, liquid and other working medium pipeline on and off. Used to Control Automatically The Liquid and Gas in The Pipeline. 2W250-25: 2W: 2 Position 2 Way 250: Aperture of Flow Rate is 25mm 25: 1' inch