Brass Solenoid Valve

2W025-08 1/4' Direct Acting Brass Solenoid Valve Technical Data of 2W & 2S Solenoid Valve: 2W Series 2W025-08 2W040-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50 2S Series 2S025-08 2S040-10 2S160-15 2S200-20 2S250-25 2S350-35 2S400-40 2S500-50 Orifice Size 2.5 4 15 20 25 35 40 50 Port Size 1/4' 3/8' 1/2' 3/4' 1' 1-1/4' 1-1/2' 2' Medium Water, Air, Gas, Oil Action Direct Acting Semi-Direct Diaphragm Operated Function 2 Way, Normally Closed Fluid Viscosity 20 CST

5404-08 Type 1 Inch Pilot Operated Servo-assisted Piston Brass Solenoid Valve The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin. In combination with a plug to DIN EN 175301-803 Form A, the valves satisfy degree of protection IP65. Servo-assisted piston valve with an orifice up to DN50 Explosion proof versions

Type 1/2' 5404 High Pressure Servo-assisted 2/2-way Piston Brass Solenoid Valve The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin. In combination with a plug to DIN EN 175301-803 Form A, the valves satisfy degree of protection IP65. Servo-assisted piston valve with an orifice up to DN50 Explosion proof

6014 Type G1/8' 3/2 Way Normally Closed Direct Acting Plunger Brass Solenoid Valve Valve 6014 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Threaded connection Single or floor connection combination for neutral gases

6013 Type 1/4' NPT 2/2 Way Direct Acting Plunger Operated Brass Solenoid Valve Valve 6013 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. • Direct-acting and compact valve up to diameter of DN 6.0 • Vibration-proof, bolted coil system • Increased leak-tightness with welded plunger guide tube • Explosion

Normally Open Emergency Gas Shut Off Solenoid Valve 9V 12V DC 1 1/2 3/4 Inch This gas shut off solenoid valve mainly be used in every kind of fuel gas pipeline being in danger (divulging, breakage) to give an alarm and quick closedown automatically, especially suitable for inflammable gas pipeline's safety and protection system. May match with each kind of alarm apparatus. Specifications: 1. Suited medium: Natural Gas,Liquefied Gas,Manufactured Gas and Non-corrosiveness Air 2

9V 12V Emergency Automatic Shut-off Solenoid Valve For Gas Line 1 1/2 3/4 Inch This gas shut off solenoid valve mainly be used in every kind of fuel gas pipeline being in danger (divulging, breakage) to give an alarm and quick closedown automatically, especially suitable for inflammable gas pipeline's safety and protection system. May match with each kind of alarm apparatus. Specifications: 1. Suited medium: Natural Gas,Liquefied Gas,Manufactured Gas and Non-corrosiveness Air

2 Way Brass Solenoid Valve 6240 A 6.0 NBR FKM 1/4' 3/8' 1/2' 230V 120V 24V This is a brass solenoid valve similar to 6240 A, 1/4' to 1/2' female threaded port size, 3 to 10mm orifice size, 2 way normally closed, plunger direct acting, 0 to 25 bar working pressure, standard NBR seal, can be customized as EPDM or FKM seal to suit different working mediums, various voltages for your choice, such as 12VDC, 24VDC, 24VAC, 110VAC and 220VAC, etc. It is used for a wide arrange of

6213 A 25.0 1' 10bar Brass Solenoid Valve For Water Air Gas Liquid 24V 110V 230V​ Product Features: 1. Working Medium: Water, Air, Gas, Liquid, Oil, etc 2. Working Pressure Range: 0.3 to 10 bar (10mm to 25mm orifice), 0.7 to 16 bar (40mm to 50mm orifice) 3. Medium Temperature Range: NBR (-5 to +80ºC), EPDM (-5 to +120ºC), FKM (-10 to +150ºC) 4. Port Size: 1/4', 3/8', 1/2', 3/4', 1', 1 1/4', 1 1/2', 2' 5. Orifice Size: 10mm, 13mm, 20mm, 25mm, 40mm, 50mm 6. Body Material: Brass

6213 A 10.0 3/8' Brass Solenoid Valve For Water Air Gas Liquid 230V 110V 24V Product Features: 1. Working Medium: Water, Air, Gas, Liquid, Oil, etc 2. Working Pressure Range: 0.3 to 10 bar (10mm to 25mm orifice), 0.7 to 16 bar (40mm to 50mm orifice) 3. Medium Temperature Range: NBR (-5 to +80ºC), EPDM (-5 to +120ºC), FKM (-10 to +150ºC) 4. Port Size: 1/4', 3/8', 1/2', 3/4', 1', 1 1/4', 1 1/2', 2' 5. Orifice Size: 10mm, 13mm, 20mm, 25mm, 40mm, 50mm 6. Body Material: Brass 7.

High Temperature High Pressure Brass Solenoid Valve Type 5404 For Water Steam 230V AC 24V DC The 5404 solenoid valve is an indirect operated solenoid valve, which means that a pressure difference of at least 1 bar is required to open the valve. The 5404 has a piston to seal the valve, instead of a flexible rubber membrane. This robust design allows for high working pressures, in some versions up to 50 bar. Gas and steam versions are also available up to 160°C. The gate sizes

Type 5404 High Temperature Brass Solenoid Valve For Oxygen 230VAC 24VDC The 5404 solenoid valve is an indirect operated solenoid valve, which means that a pressure difference of at least 1 bar is required to open the valve. The 5404 has a piston to seal the valve, instead of a flexible rubber membrane. This robust design allows for high working pressures, in some versions up to 50 bar. Gas and steam versions are also available up to 160°C. The gate sizes range from 1/4" to 1"

1/8' VX2120-06 1/4' VX2120-08 Brass Solenoid Valve For Water Oil Gas SMC Type 220V 24V VX2120 series solenoid valves, size ranges from 1/8' to 1/2', applicable for air, gas, water, hot water, light oil, etc. Different seals are availalbe for different fluids, while different threads are available, including G, PT and NPT thread. According to different industry demand, the VX2120 series solenoid valve provides 7 different voltage coils for your use, available with DIN type and

SMC Type Brass Solenoid Valve For Water Gas 3/8' VX2130-10 1/2' VX2130-15 220V AC 24V DC VX2130 series solenoid valves, size ranges from 1/8' to 1/2', applicable for air, gas, water, hot water, light oil, etc. Different seals are availalbe for different fluids, while different threads are available, including G, PT and NPT thread. According to different industry demand, the VX2130 series solenoid valve provides 7 different voltage coils for your use, available with DIN type

SMC Type Brass Solenoid Valve For Water 1/8' VX2120-06 1/4' VX2120-08 220V 24V VX2120 series solenoid valves, size ranges from 1/8' to 1/2', applicable for air, gas, water, hot water, light oil, etc. Different seals are availalbe for different fluids, while different threads are available, including G, PT and NPT thread. According to different industry demand, the VX2120 series solenoid valve provides 7 different voltage coils for your use, available with DIN type and flying

Shako Type Brass Solenoid Valve 1 1/4' PU225-012 1 1/2' PU225-14 220V AC 24V DC 1. PU225 Brass pilot / servo General purpose 2/2 Way normally closed solenoid valve. 2. Port sizes: 3/8" PU225-03, 1/2" PU225-04, 3/4" PU225-06, 1" PU225-08, 1 1/4" PU225-12, 1 1/2" PU225-14, 2" PU225-20, 2 1/2" PU225-24 and 3" PU225-28 3. Port Options: G, BSP, NPT. 4. Construction: Body die cast Brass, stainless steel internals one piece core tube, AISI430F armature and A

2 Way Shako Type Electric Brass Solenoid Valve 3/4' PU225-06 1' PU225-08 220VAC 24VDC 1. PU225 Brass pilot / servo General purpose 2/2 Way normally closed solenoid valve. 2. Port sizes: 3/8" PU225-03, 1/2" PU225-04, 3/4" PU225-06, 1" PU225-08, 1 1/4" PU225-12, 1 1/2" PU225-14, 2" PU225-20, 2 1/2" PU225-24 and 3" PU225-28 3. Port Options: G, BSP, NPT. 4. Construction: Body die cast Brass, stainless steel internals one piece core tube, AISI430F armature

2/2 Way NC Shako Type Brass Solenoid Valve 3/4' PU225-03 1/2' PU225-04 220V 24V 1. PU225 Brass pilot / servo General purpose 2/2 Way normally closed solenoid valve. 2. Port sizes: 3/8" PU225-03, 1/2" PU225-04, 3/4" PU225-06, 1" PU225-08, 1 1/4" PU225-12, 1 1/2" PU225-14, 2" PU225-20, 2 1/2" PU225-24 and 3" PU225-28 3. Port Options: G, BSP, NPT. 4. Construction: Body die cast Brass, stainless steel internals one piece core tube, AISI430F armature and A

2 Way Shako Type Brass Solenoid Valve 3/4' PU220-03 1/2' PU220-04 220VAC 24VDC 1. PU220 series Brass Zero rated General purpose 2/2 Way normally closed solenoid valve. 2. Port Sizes: 1/8' PU220-01, 1/4' PU220-02, 3/8" PU220-03, 1/2" PU220-04, 3/4" PU220-06 and 1" PU220-08 3. Port Options: G, BSP, NPT thread. 4. Construction: Body die cast Brass, Stainless steel internals one piece core tube, 430F armature and 302 springs to extend solenoid valve life. 5. Seal options: NBR,

Shako Type Brass Solenoid Valve For Water 1/8' PU220-01 1/4' PU220-02 220V AC 24V DC 1. PU220 series Brass Zero rated General purpose 2/2 Way normally closed solenoid valve. 2. Port Sizes: 1/8' PU220-01, 1/4' PU220-02, 3/8" PU220-03, 1/2" PU220-04, 3/4" PU220-06 and 1" PU220-08 3. Port Options: G, BSP, NPT thread. 4. Construction: Body die cast Brass, Stainless steel internals one piece core tube, 430F armature and 302 springs to extend solenoid valve life. 5. Seal options: