Brass Solenoid Valve

2/2 Way UD-10 Normally Closed 2W040-10 Direct Acting Brass Water Valve For Water Air And Gas Start working at differential pressure, the UW series valve has a completely range of solenoid valves from 1/8" to 2". UW series valve is among the oldest history valves, we have stainless steel valve and brass valve for your reference, both of SS valve and brass valve can be normal close valve and normal open valve. This series solenoid valves are most popular valves used for many

2-Way Solenoid Valve UD Series 2/2 Miniature Regular Type, Normally Closed Water Solenoid Valve Feature: 1.Brass Body,Strong corrosion resistance and beautiful appearance 2.Copper Coil,Tightly wounded, full of weight 3.At the wire joint, it is further processed and safer and more reliable. 4.Spring diaphragm for durability and aging resistance 5.Direct-Acting, conductive, normally closed. 6.Valve body material is forged brass. 7.Can be operated directly without pressure. 8

2/2 way Normally Closed UW-15 2W160-15 1/2Inch NBR Diaphragm Direct Operated Water Valve Feature: 1.Brass Body,Strong corrosion resistance and beautiful appearance 2.Copper Coil,Tightly wounded, full of weight 3.At the wire joint, it is further processed and safer and more reliable. 4.Spring diaphragm for durability and aging resistance Specification: Model Number:2W-160-15 Material:Brass Body,Copper Coil Medium:Water,air,oil Pressure:0-0.8MPa Liquid Temperature:-5~80℃ Port

1 1/2' 2W400-40 UW-40 Unid Type NBR Diaphragm Valve Brass Body Normally Closed AC110V DC12V The solenoid valve introduced is UW-40 solenoid valve such like UNi-D type, which is one of the largest brass solenoid valve, the orifice size is 40mm, so it's a high flow valve for Automotive & Tire, Oil & Gas, Food & Packing, Water & Wastewater. The valve structure design of this series valves is semi-direct operated with zero pressure differential. Brando solenoid valves has wide

2W350-35 UW-35 1 1/4' UNI-D Type Brass Body NBR Diaphragm Normally Closed Solenoid Valve Product Features of 2/2 Way NC Fluid Control Solenoid Valve: 1. Semi-direct operated (can be operated directly without pressure), normally closed. 2. Valve body material is brass. 3. The protection class of coil is IP65. Standard voltage : 24V DC,110V AC, 220V AC, AC Voltage tolerance: ± 10%, 24V DC, DC Voltage tolerance: ±1%. 4. Other special AC/DC can be made to client's order. 5.

UW-20 2W200-20 3/4' NBR Diaphragm Uni-d Type Water Air Oil Solenoid Valve Normally Closed DC12V AC110V The shown solenoid valve is one of our brass solenoid valve; this UW-20 solenoid valve's port size is 3/4'; the valve type of this 2/2 way brass solenoid valve is normally closed; Available mediums are water, air oil, gas, fuel and so on; standard voltages are DC12V, DC24V, AC110V, AC220V; the diaphragm common used is NBR, and Viton is also available. Followings are main

2W160-15 UW-15 1/2' Semi-direct NBR Diaphragm Uni-d Type Brass Solenoid Valve 110V AC 12V DC 2W Series 2/2 Normally Closed Direct Lift Diaphragm Valves. The Valve Body is made of Brass. Standard seals is NBR, and available is VITON. The Operating pressure Range is 0 to 5 Bar (DC). Because of the Body Material and seal options these valves can be used in with different Liquids and gasses with 99% compatibility. The only further requirement is viscosity below 40 Centistokes.

3/8' NBR Seals Unid Type Solenoid Water Valves Normally Closed AC110V DC12V 2W040-10 UD-10 The shown is UNI-D type UD-10 solenoid valve, valve body is made of brass; armature assembly is made of stainless steel 304; solenoid coil is made of enameled copper wire; and the raw materials used are of high quality. The valve operation design is direct acting at zero pressure difference. The valve function is 2/2 way normally closed, so it is widely used in Pipeling water control,

2W025-08 UD-8 1/4' UNI-D Type Brass Solenoid Valve Direct Acting Normally Closed 24VDC 110VAC This 2W025-08 / UD-08 solenoid valve has a port size that is 1/4” inch female threaded. The orifice size is 2.5mm and the CV value is 0.23. This valve is not recommended for gravity fed systems because of the small orifice size. The seal material is NBR, and Viton Rubber is also available. The coil head is fitted with a wire lead that can easily be connected with your own choice of

120VAC/60Hz 110VAC/50Hz ASCO Type 1/4' NPT 8320G174 3 Way Quick Exhaust Solenoid Valve This quick-exhaust solenoid valve features a universal valve configuration, allowing it to be connected in either a normally closed or normally open position. It is ideal for use with air, inert gases, light oil, and water, and is rated for indoor or outdoor work environments. Features: 1. All NPT connections are in the valve body to allow in-line piping; 2. No Minimum Operating Pressure

Sub Base Brass Solenoid Valve 6013 A 1.5 2.0 2.5 3.0 4.0 NBR EPDM FKM FLNSCH 6013 is a direct-acting plunger solenoid valve. Various seal material combinations are available depending on the application. It is a cost-effective valve with a universal application for neutral and clean liquids, gases and vapors. A specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant epoxy. Product

DC24V CKD Type ADK11-25G / ADK11-25A / ADK11-25N 1' Inch Pilot Kick Solenoid Valve The introduced is CKD type ADK11-25 Pilot kick 2-port diaphragm drive solenoid valve which compatible with a variety of fluids. It can be used with differential pressure 0 and supports various applications through material selection. The features as follows: 1. Supports multiple fluids The body and sealant material can be selected to support various fluids. 2. Variations Compatible with various

3/8' AC220V V10-C3C VMI Type Extruder Solenoid Valve Direct Acting Normally Closed 2 Way VMI Type V10-C3C solenoid valve is a solenoid valve specially designed for twin-screw extruder. The main parameters are: inlet and outlet size G3/8', coil voltage AC220V, temperature resistance -10-140°C, pressure resistance 0-16bar. Two-position two-way direct-acting solenoid valve, normally closed type: When energized, the solenoid valve coil is energized to generate magnetic force, and

Normally Closed DC12V Lovato Type Petrol Shut Off Valve / Electrovalve / Solenoid Valve The following is the LPG/CNG Lovato Type Petrol Shut Off Valve / Cut Off Valve, liquefied gas natural gas modified single point kit used, carburetor car modified. It is suitable for all kinds of vehicle modification single-point (liquefied gas, natural gas) kits, especially for carburetor vehicles, and the oil is more thorough. Installation position: The oil shut-off valve is installed on

G1-1/2 Inch Brass Water Oil Valve AC220V / DC24 Normal Close Solenoid Valve 2W400-40 The 2W series zero differential valves have the thread size range from 1/8" to 2". It was produced when the factory was established, and currently now two types of material are available: brass and stainless steel, with function of normal close and normal open. Due to its stable performance, this type of solenoid valve is widely used in many different industrial fields. The 2W400-40 Solenoid

2/2 Way NC 1-1/4' Inch Direct-acting AC220V Brass Body Water Treatment UW-35 Uni-D Type 2W350-35 The valve below is UW-35 Uni-D Type Solenoid Valve 2W350-35.2/2 Way Normal Close Type Operated Solenoid Valve for water, gas, air, which viscosity fluids (< 20 cst). Able to be operated directly under low pressure. Solenoid valves consist of a coil, plunger and sleeve assembly. A plunger opens or closes the orifice by raising or lowering within a sleeve tube by energising the coil

UNI-D Type UW50 2 Inch Female Thread NC Solenoid Valve 2/2 Way Direct-acting 2W500-50 FEATURES Compact volume, large flow, widely use. Steel shell, good heat dissipation. IP54, low cost. Body material: brass, stainless steel. NBR, VITON, EPDM, SILICONE seals are available Normally closed and normally open. Description: 2W500-50 Two-Position Two-Way Diaphragm Water Solenoid Valve Series, is made of brass. Direct acting, Normally Closed, Diaphragm solenoid valve, for water, air

2W250-25 Brass Body G1' Inch Operated Pneumatic Solenoid Valve The valve below is 2 / 2 Way G1' Inch Normal Close Type Operated Brass Solenoid Valve 2W250-25.High quality normally closed electric solenoid valve, for water, air or oil. It's applicable in many fields. Solenoid valve is a kind of industrial equipment and electrical appliance which uses electromagnetic control switch to adjust the direction, flow and cut-off parameters of medium in the control system of

G1/8' Direct Acting ODE Type 21JN1R0V15 Coffee Machine Solenoid Valve AC220V DC24V The below valve is direct acting 2/2 way brass Coffee Machine Solenoid Valve, which can replaces M&M, ODE, CEME brand. Type: General Purpose Solenoid Valves Functioning: 2/2 way direct acting, NC, NO Port connection: G1/8' Body material: Brass Flow Kv (l/min): 1, 1.1, 2, 2.3 1. Replacement: CEME 5220 / 5201, ODE 21JB-JN series 21JBMR0B20 / 21JN1R0V12 / 21JN1R1V12-T3 / 21JN1R0V15 / 21JN1R0V20 /

2/2 Way Brass Body G3/4' Thread Normal Close Solenoid Valve 2W200-20 2W series solenoid valve acts as a direct valve. It designed as compact volume and protection class is IP 54. The valve body material are available with brass and stainless steel. It has three types of seal material, NBR, EDPM and VITON. 2W series solenoid valve offers fast and safe switching, high reliability, long service life and good medium compatibility of material. 2W200-20: 2W: 2 Position 2 Way 200: