Bently Nevada 3500 System

330854-080-25-05 Bently Nevada Sensor Proximity Probe Description T he Bently Nevada 330854‑080‑25‑05 Extension Cable (which is part of the Bently Nevada 3300 XL 25 mm proximity‑transducer family).This item belongs to the Bently Nevada “3300 XL 25 mm” Proximity Transducer System.The 25 mm version has a nominal output scale factor of ~0.787 V/mm (20 mV/mil) and a linear range of about 12.7 mm (500 mils) when calibrated to a standard target (AISI 4140 steel) under specified

330101-00-12-50-01-05 Bently Nevada Proximity Transducer Description T heBently Nevada 330101‑00‑12‑50‑01‑05 Proximity Transducer (probe)is part of the 3300 XL 8 mm Proximity Transducer System.The system provides an output voltage that is directly proportional to the distance (gap) between the probe tip and a conductive surface. It can measure both static (position) and dynamic (vibration) valuesThe 8 mm probe (larger than the 5 mm alternative) offers improved robustness and

330130-080-10-00 Bently Nevada Extension Cable Description T he the 330130‑080‑10‑00 extension cable would serve in such a system to connect the probe to the sensor, at a length of around 8 metres, with the specified cable/connector option code “10”330130‑series extension cable is designed to work with the 3300 XL proximity transducer systems. According to the 3300 XL 8 mm Proximity Transducer System datasheet:The components are designed to be fully interchangeable across

330104-00-03-10-01-05 Bently Nevada Proximity Probe Description T he Bently Nevada 330104‑00‑03‑10‑01‑05 Proximity Probeis part of the 3300 XL 8 mm Proximity Transducer System from Bently Nevada. The system is designed for non‑contacting displacement (position) or vibration measurement of conductive surfaces, especially rotating machinery shafts and similar targets. FAQ Q1: What does a “proximity probe” do? A1: A proximity probe (also called an eddy‐current displacement

330102-00-44-10-11-05 Bently Nevada Proximity Probe Description T he part number 330102‑00‑44‑10‑11‑05 corresponds to a proximity probe manufactured by Bently Nevada in their 3300 series (specifically the “8 mm” / 3300 XL 8 mm family) — though this exact variant may be a “NSv” side‑view optimized version. A supplier listing identifies it as “330102‑00‑44‑10‑11‑05 Bently Nevova 3300 NSv Proximity Probe”. It is a non‑contacting eddy‐current proximity probe intended to measure

990-05-XX-02-BR 147202-01 Bently Nevada Digital input module Description T he Bently Nevada 147202‑01 I/O Module (also referenced with the catalog variant “990‑05‑XX‑02‑BR / 147202‑01”)It is intended for use in machinery monitoring systems (rotating equipment monitoring) and interfaces sensor signals (or field discrete signals) to the higher‑level monitoring/control system.According to one listing, “Available in both analog and digital configurations” under the 147202‑01

330101-30-10-02-05 Bently Nevada Proximity Probe Description T he 330101‑30‑10‑02‑05 probe is part of the Bently Nevada 3300 XL 8 mm Eddy‑Current Proximity Transducer series. These probes are designed for high‑reliability monitoring of rotating machinery, providing non‑contacting vibration or shaft‐position measurement. The probe is intended to be used with the associated extension cable and Proximitor® sensor in the transducer system. In short: this is a robust industrial

330101-00-12-90-02-00 Bently Nevada Proximity Probe Description T he 330101‑00‑12‑90‑02‑00 is a model of proximity probe (eddy‑current sensor) from Bently Nevada, part of the 3300 XL series of proximity transducer systems. It is designed to detect the distance (gap) between the probe tip and a conductive target (such as a shaft, rotor, or collar) and supply that measurement to a monitoring system, typically via its companion Proximitor electronics.The specific model code

330130-075-10-05 Bently Nevada Standard Extension Cable Description T he Bently Nevada 330130‑075‑10‑05 is a standard extension cable used as part of the Bently Nevada 3300 XL proximity transducer system. It is designed to link the proximity probe to the Proximitor sensor (or monitoring electronics) for measuring shaft displacement or vibration in rotating machinery.It is part of the “3300 XL 8 mm” family (or compatible with that family) according to the official datasheet.It

330180-X1-00 MOD:145004-128 Bently Nevada Proximity Sensor Description T he Bently Nevada 330180‑X1‑00 is a proximity transducer sensor (often called a “Proximitor Sensor” or proximity probe assembly) designed for use in rotating‑machinery monitoring systems. It belongs to the 3300/3300 XL series of eddy‑current proximity transducer systems from Bently Nevada. It is intended to measure shaft position, vibration, and axial/radial displacement (depending on mounting) by sensing

991-25-70-01-00 Bently Nevada Thrust Transmitter Description T he Bently Nevada 991‑series Thrust Transmitter is a specialized sensor/transmitter device intended primarily for measuring axial displacement (thrust movement) in rotating machinery—especially in applications such as centrifugal air compressors, fans, pumps, or motors where thrust bearing clearance or rotor axial position is of interest.It is a 2‑wire, loop‑powered 4‑20 mA device that accepts a proximity probe

89477-80 Bently Nevada Interconnect Cable Description T he Bently Nevada 89477‑80 Interconnect Cable.is used as a “sensor interconnect” cable in Bently Nevada’s vibration monitoring system architecture — connecting sensors, transducers, probes, or modules to the monitoring hardware. While I do not have a full detailed specification sheet publicly available for this exact part (like shielding, conductor details, temperature rating, etc.), it falls under their sensor/accessory

330881-16-00-060-01-02 Bently Nevada Proximity Transducer Assembly Description T he transducer assembly from Bently Nevada is part of their PROXPAC XL (or “330881 …” series) proximity transducer assemblies. These are self-contained proximity probe systems designed for shaft position/displacement (gap) and vibration monitoring on rotating machinery, especially where high reliability and industrial grade ruggedness are required.transducer assembly from Bently Nevada is part of

330500-01-05 Bently Nevada Velomitor Piezo-velocity Sensor Description T he Bently Nevada 330500 Velomitor Piezo-velocity Sensor is a rugged, solid-state vibration sensor designed for absolute velocity measurement of machine casings, bearing housings, or structural elements.It uses piezoelectric technology (piezo-velocity principle) combined with onboard electronics — so it has no moving parts, improving long-term durability and reliability.The part number “330500-01-05”

330102-00-40-05-01-05 Bently Nevada Proximity Probes Description T he 330102-00-40-05-01-05 is a version of the Bently Nevada 3300 XL 8 mm proximity probe series. It is an eddy-current non-contact displacement/vibration probe used for rotating machinery monitoring (shaft vibration, position, Keyphasor/speed reference) in harsh industrial environments.It is an 8 mm diameter probe tip (“8 mm” refers to the tip size for the 3300 XL family) which gives robust mechanical strength

330103-00-10-50-02-00 Bently Nevada Proximity Probes Description T he 330103-00-10-50-02-00 is a version of Bently Nevada’s 8 mm eddy-current proximity probe system (3300 XL series). The “330103” model identifier specifically means:The “8 mm probe” type with armour (i.e., a version that includes armored probe/cable assembly).The “-00” after that indicates an unthreaded length option of 0 mm (i.e., standard thread length).“-10” is the Overall Case Length Option (in the code

330102-00-40-50-02-00 Bently Nevada PROXIMITY PROBES Description T he part number corresponds to a probe in the 3300 XL 8 mm Proximity Transducer System, specifically the “330102” series which is defined as: 8 mm probe, thread size 3/8-24 UNF, with armour (i.e., armored cable or armored probe assembly).The probe is used for non‐contact measurement of shaft vibration and position (eddy‐current principle) and is part of a system (probe + extension cable + Proximitor sensor)

330101-00-40-05-01-00 Bently Nevada Vibration sensor probe programmable cable Description T he 330101-00-40-05-01-00 is part of the 3300 XL series of 8 mm eddy-current proximity transducer systems. These systems are used for non-contact measurement of shaft vibration and position in rotating machinery (such as bearings, turbines, compressors) and are designed for high performance, high reliability industrial environments. 330101-00-40-05-01-00 Details FAQ Q1: What does the

109549-01 Bently Nevada NSV Photoelectric Probe Description T he 109549‑01 is a photoelectric probe (optical sensor) designed for use in the 3300 XL NSv system (“NSv” = Narrow‑Spacing version) of the Bently Nevada 3300 family.It is intended for applications where normal (standard) proximity probe spacing or geometry is constrained (for example, shafts 

330103-00-60-05-02-05 Bently Nevada Proximity Probes Description T he Bently Nevada 330103‑00‑60‑05‑02‑05 is a variant of the 3300/3300 XL series eddy‐current (non‐contact) proximity probes / transducers manufactured by Bently Nevada . These probes are used to measure the gap between a conductive target (typically a rotating shaft or a reference ring) and the probe tip, and convert that gap into a voltage output. This allows monitoring of shaft displacement, static or dynamic