Bently Nevada 3500 System

21000-28-10-20-102-01-02 Bently Nevada Proximity Probe Housing Assemblies Description T he Bently Nevada 21000-28-10-20-102-01-02 Proximity Probe Housing Assemblyis used in industrial vibration or position‑monitoring setups (e.g. shafts, rotors, bearings), where a durable external mount is needed for proximity probes, especially in hazardous or exposed environments.The 21000 series “Proximity Probe Housing Assemblies” from Bently Nevada are all-metal external housings

21000-28-05-00-75-01-02 Bently Nevada Proximity Probe Housing Assemblies Description T he 21000‑28‑05-00-75-01-02is a Proximity Probe Housing Assembly from Bently Nevada, part of the 21000 series. According to Bently’s datasheet, the 21000 housing assembly is made of aluminum, with a stainless‑steel sleeve, and is used to mount proximity (eddy-current) probes externally on machinery.The housing allows a reverse-mount probe to be mounted such that the probe tip extends from

BA21504-00-08-10-02 Bently Nevada Proximity Probe Description T he BA21504-00-08-10-02 probe is part of the Bently Nevada 7200/3300 XL “8 mm” proximity transducer system. It is used to sense the distance (gap) between a conductive target (usually a rotating shaft or component) and the probe tip, converting changes in that gap into a signal (via eddy‐current principle) which is then processed by a proximitor/amplifier.It is a standard‐mount, 8 mm diameter probe, with a 3/8‑24

330180-X1-05 MOD:145004-90 Bently Nevada Proximitor Sensor Description T he part is a Proximitor® (non‑contacting displacement/vibration/position) sensor from the Bently Nevada 3300 XL family. The “330180” is base model number for the 3300 XL Proximitor Sensor. For example: product listings show “330180‑X1‑05 MOD:145004‑90 Bently Nevada Proximitor Sensor”.This sensor works together with a matching probe (and extension cable) in the 3300 XL system to monitor the distance

330102-00-12-90-02-05 Bently Nevada Proximity Probe Description T he 330102‑00‑12‑90‑02‑05 while:330102: This prefix indicates it is an 8 mm probe with armor (3300 XL family). 00 (second group): This refers to the unthreaded length. “00” typically means 0 in (or minimal) unthreaded portion before the thread.12: This is the "case length" — per the ordering spec, "12" corresponds to a 1.2 inch probe body. 90: This is very likely the cable length option, and from the 3300 XL

330101-00-36-05-02-05 Bently Nevada Proximity Probe Description T heBently Nevada 330101‑00‑36‑05‑02‑05 is part of the 3300 XL 8 mm Proximity Probe system from Bently Nevada.It is a non‑contacting eddy‑current proximity sensor (“probe”) designed for vibration / shaft‑displacement measurement on rotors and other high‑speed rotating equipment. Bently Nevada pioneered this technology. FAQ Q1: What is the difference between part numbers like 330101‑00‑36‑05‑02‑05 vs 330101‑00‑36

330704-000-100-10-01-RU Bently Nevada Proximity Probe Description T he 330704-000-100-10-01-RU Bently Nevada Proximity Probebelongs to the Bently Nevada 3300 XL Proximity Transducer System, specifically the 11 mm (diameter) probe family.It is a non-contact, eddy‑current sensor: it creates a high-frequency magnetic field; as a conductive target (like a shaft) moves closer or further, it changes the eddy currents, which the probe detects.Designed to work with widely-used 3300

330880-00-20-038-00-02 Bently Nevada Proximity Transducer Assembly Description T he 330880 series PROXPAC XL from Bently Nevada is a self‑contained proximity (vibration/position) transducer assembly that integrates a proximity probe, housing, and the Proximitor (sensor electronics) into one unit. According to the datasheet:It uses a built‑in sensor (e.g., a 3300 XL Proximitor) inside the housing, eliminating the need for a separate Proximitor housing and extension cable.The

24701-28-10-35-027-03-02 Bently Nevada Proximity Probe Housing Assemblies Description T he 24701‑28‑10‑35‑027‑03‑02 is a stainless steel body probe housing assembly, with an 8 mm 3300 XL probe (with approvals) and connector, a 1.0 m cable, a 3.5 in standoff adapter, 2.7 in probe penetration, conduit fitting option 03, and mounting thread 3/4‑14 NPT.The model “24701” refers to a stainless steel body version of the externally‑mounted proximity probe housing assembly from Bently

31000-28-05-00-037-03-02 Bently Nevada Proximity Probe Housings Description T he 31000 series probe‑housing from Bently Nevada is designed to house one of their proximity probes (e.g., from the 3300 XL family) and mount it through a machine case. The housing provides mechanical, environmental and mounting support, enabling the probe to be installed and adjusted without disassembling the machine casing.a housing labeled “31000‑28‑05‑00‑037‑03‑02” likely means: 31000 series

330102-04-45-50-01-00 Bently Nevada Proximity Probes Description The 3300 XL system is designed for st atic (position) and dynamic (vibration) measurement.It’s part of a transducer system that includes the probe, an extension cable, and a Proximitor sensor.This is a 3300 XL series proximity probe from Bently Nevada. The “330102” family refers to the 8 mm eddy-current probe with armor (i.e., with protective stainless-steel covering). FAQ 1. What does “330102” mean in the part

330102-00-80-10-11-00 Bently Nevada Proximity Probe Description T he Bently Nevada 330102‑00‑80‑10‑11‑00 proximity probe is part of the Bently Nevada “3300 XL 8 mm” proximity transducer system.The 8 mm designation refers to the probe tip diameter (8 mm) suitable for vibration and displacement measurement in rotating machinery.The system (probe + extension cable + Proximitor sensor) provides an output voltage proportional to the distance between the probe tip and the

991-01-XX-01-00 MOD: 284318-01 Bently Nevada Thrust Transmitter Description T he 991 Thrust Transmitter is a 2-wire, loop-powered device designed to convert axial shaft displacement (i.e., thrust) into a 4–20 mA signal for control systems.It takes input from a 3300 NSv proximity probe plus its matched extension cable (system-length options like 5 m or 7 m are supported).The transmitter conditions the raw proximity signal into “engineering units” of axial position and then

21000-34-05-15-29-04-02 Bently Nevada Proximity Housing Assemblies Description T he 21000-series housing is a well-established, rugged solution for mounting proximity probes externally on machines.The suffixes (“34‑05‑15‑29‑04‑02”) mostly make sense except for “29” — likely that is an error / mis-typed value for the penetration (D) field.If you meant something like 21000‑34‑05‑15‑056‑04‑02, then you’d have a 3300 XL 8 mm probe + 0.5 m cable + 1.5 in standoff + 5.6 in

330103-00-05-05-02-00 Bently Nevada Proximity Probes Description T he Bently Nevada 330103‑00‑05‑05‑02‑00 proximity probe is a 3300 XL 8 mm proximity transducer probe.“330103” is the base model code indicating: 8 mm probe, M10 × 1 thread, without armor. Bently Nevada 330103‑00‑05‑10‑02‑00 Probe — same probe body but 1.0 m cable instead of 0.5 m.Bently Nevada 330103‑00‑04‑10‑02‑05 Probe — 30 mm case length, 1.0 m cable, with hazardous‑area approvals.When used with a 3300 XL

330101-00-15-10-01-00 Bently Nevada Extension Cord Sensor Probe Description T he 330101-00-15-10-01-00 is a Bently Nevada 3300-XL 8 mm proximity (eddy-current) probe with integral cable (an “extension cord / sensor probe” style assembly). It’s the 8 mm-tip probe (330101 = 3300-XL 8 mm probe, 3/8-24 UNF thread, without armor) configured with a case-length code 15, a 1.0 m integral cable, a ClickLoc connector with connector-protector (option code 01), and no special agency

330703-000-060-10-11-05 Bently Nevada Coupler Module Description T he330703-000-060-10-11-05 Bently Nevada Coupler Moduleis designed to work with the 3300 XL system: probe → extension cable → Proximitor sensor.The 11 mm tip (larger than the 8 mm family) gives a longer linear range, which is useful for measuring larger shaft movements, thrust, or when bigger target gaps are needed.The FluidLoc cable option (“11”) means it has a sealing design to help prevent fluid (like oil)

330103-00-14-50-02-00 Bently Nevada Proximitor Probe Description T he Bently Nevada 330103-00-14-50-02-00 is An 8 mm-tip Bently Nevada 3300-XL proximity (eddy-current) probe assembled as a probe + integral extension cable for use with the 3300-XL Proximitor sensor family. The suffix -14 indicates a 140 mm case length, -50 a 5.0 m total (integral) cable, -02 the miniature ClickLoc coax connector with standard (non-FluidLoc) cable, and 00 no special approvals. Feature

330103-00-07-50-02-00 Bently Nevada Vibration Probe Sensor Description T he Bently Nevada 330103‑00‑07‑50‑02‑00 8 mm Proximity (Vibration) Probe.This part is a 3300 XL 8 mm probe from Bently Nevada’s proximity transducer system.It uses eddy-current (non-contact) sensing to measure both static position (displacement) and dynamic vibration of rotating machinery.It’s one component of the 3300 XL 8 mm Transducer System (which also includes an extension cable and a Proximitor

330709-000-070-50-02-00 Bently Nevada Proximity Probe Description T he Bently Nevada 330709‑000‑070‑50‑02‑00is a proximity probe (eddy-current displacement/vibration sensor) from the Bently Nevada 3300 XL 11 mm family.The “11 mm” refers to the diameter of the probe tip. The larger 11 mm tip gives a longer linear measurement range compared to smaller probes in the series.Such probes are used for non-contacting measurement of displacement (static) and vibration (dynamic) of