Bently Nevada 3500 System

330103-02-08-10-02-00 Bently Nevada Proximity Probe Description T he 330103‑02‑08‑10‑02‑00 is a specific variant of the 3300 XL 8 mm Proximity Transducer System probe. The 8 mm series is designed for non‑contacting eddy‑current measurement of shaft/target displacement (both static position and dynamic vibration) in rotating equipment (e.g., turbines, compressors, pumps) with fluid‑film bearings. This probe is part of a system along with a matching extension cable (or integral

330909-00-20-05-02-05 Bently Nevada Sensor Proximity Probe Cable Description T he 3300 XL NSv Transducer System is designed for tight‑installation applications (small shafts, limited side‑view, etc.). The system consists of a probe, an extension cable (or integral cable), and a Proximitor® sensor. The variant 330909‑00‑20‑05‑02‑05 is a probe/cable assembly in that series — likely with its cable integral (or fixed length) and specific connector/approval options. FAQ Q1: What

330902-00-38-05-02-05 Bently Nevada Sensor Proximity Probe Cable Description T he 330902‑00‑38‑05‑02‑05 is a specific configuration of the 3300 XL NSv proximity transducer system (probe + cable) designed for tight‑installation applications (small shafts, limited side‑view, etc.). The “NSv” family is a smaller clearance, compact version of Bently’s probe systems.While your part number mentions “Cable” in your wording, the ordering information suggests this is a full probe

330104-01-09-10-12-05 Bently Nevada Proximity Probe Description T he Bently Nevada 330104‑01‑09‑10‑12‑05 Proximity Transducer System from Bently Nevada comprises a probe (this part), an extension cable (or integral cable), and a Proximitor® sensor. The system uses eddy‐current technology to provide an output voltage proportional to the distance (gap) between the probe tip and a sensed conductive target (shaft or other surface). It is suitable for both static (position) and

330104-01-09-10-11-05 Bently Nevada Proximity Probe Description T he 3300 XL 8 mm Proximity Transducer System from Bently Nevada comprises a probe (such as this part), an extension cable (or integral cable) and a Proximitor® sensor. The system uses eddy‑current technology to provide an output voltage directly proportional to the distance between the probe tip and a sensed conductive target (shaft or other surface). It is intended for static or dynamic displacement measurement

330104-00-05-90-02-05 Bently Nevada Proximity Probe Description T he 330104-00-05-90-02-05 is a specific configuration of the 3300 XL 8 mm Proximity Probe family from Bently Nevada. It is designed for non-contacting eddy-current displacement or vibration measurement on rotating equipment (shaft/target) when used with the appropriate Proximitor® sensor and extension cable. The 8 mm probe series provides a rugged construction and supports the industry standard performance of

330101-00-25-05-01-05 Bently Nevada Proximity Probe Description T he probe labeled 330101-00-25-05-01-05 comes from the Bently Nevada 3300 XL 8 mm Proximity Transducer System — which is a non-contacting eddy-current displacement/vibration measurement probe system designed for machinery protection and condition monitoring.The “8 mm” refers to the nominal diameter of the probe tip for this series (≈ 0.31 in) — offering robust mechanical construction and good interchangeability

330102-00-40-10-11-05 Bently Nevada Proximity Sensor Cable Description T he 330102-00-40-10-11-05 is a specific configuration of the Bently Nevada 3300 XL 8 mm Proximity Transducer System extension cable (or cable/probe assembly) series. It is intended to serve as the “extension cable” or integral cable part of the complete eddy-current proximity transducer system (probe + extension cable + Proximitor® sensor) used for vibration/displacement monitoring on rotating equipment.

330704-00-50-10-01-05 Bently Nevada Proximity Probes Description T he 330704-00-50-10-01-05 is a specific configuration of the 3300 XL 11 mm Proximity Probe family (11 mm tip diameter) tailored for precision non-contact displacement/vibration monitoring in heavy machinery environments. It forms part of the 3300 XL 11 mm Proximity Transducer System. FAQ Q1: What does the “330704” prefix mean in the part number? A1: It designates the probe series. In the 11 mm line: 330703 is

330701-00-25-10-11-05 Bently Nevada Proximity Probes Description T he 3300 XL 11 mm Proximity Transducer System from Bently Nevada (of which part number 330701-00-25-10-11-05 is a specific probe version) is a non-contacting eddy-current probe system for measuring displacement or vibration of a rotating shaft or other conductive target. The system comprises the probe (the part in question), an extension cable, and a Proximitor® sensor. FAQ Q1. What does “11 mm” mean in the

330881-28-6-155-03-02 Bently Nevada Proximity Transducer Assembly Description T he 330881-28-6-155-03-02 is a fully-integrated proximity transducer assembly from the PROXPAC XL family.It integrates a probe (usually the 3300 XL 8 mm probe series) and a Proximitor® sensor in the same housing. This design eliminates the need for a separate extension cable between the probe and the Proximitor.This transducer assembly is ideal for monitoring radial shaft position/displacement or

16925-66 Bently Nevada Proximity Probe Description T he 16925-66 probe belongs to the family of Bently Nevada non-contacting proximity (eddy-current) probes used for shaft position / vibration monitoring on rotating machinery.These probes detect very small distances between the probe tip (which is near the rotating shaft or target) and a conductive surface (shaft, bore, or other target) by using eddy-current sensing technology.They are part of a system where the probe is

330730-080-10-05 Bently Nevada Sensor Probe Extension Cable Description T he 330730-080-10-05 extension cable is part of the “3300 XL 11 mm” proximity transducer system family (11 mm series) from Bently Nevada. For example, the “330730” family code appears in listings of 3300 XL 11 mm extension cables. The 330730-080-10-05 is a specialized, rugged extension cable component of the Bently Nevada 3300 XL 11 mm proximity transducer system, designed for reliable signal transmissio

330930-065-03-00 Bently Nevada Sensor Proximity Probe Cable Description T he330930-065-03-00 is an extension cable used within the Bently Nevada “3300 XL NSv” (and more broadly “3300 NSv”) proximity transducer system family. It connects a proximity probe (or sensor) to the associated pre-amplifier / monitoring electronics.It’s part of the 3300-series NSv (Narrow Shaft version) system: the broader system is described in the datasheet as: “The 3300 XL NSv Proximity Transducer

330881-16-00-175-00-02 Bently Nevada Proximity Transducer Description T he 330881-16-00-175-00-02 is a rugged, integrated proximity transducer system (probe + sensor + housing) designed for industrial rotating machinery monitoring, using a 3300 XL 8 mm probe, with a 175 mm penetration length, standard mount, no extra standoff, and standard thread. It is built for harsh environments (IP66/Type4X) and simplifies installation by combining components. FAQ Q1: What is the sensing

330930-040-01-05 Bently Nevada Sensor Proximity Probe Cable Description T he 330930-040-01-05 is a rugged 4 m extension cable for the 3300 series proximity transducer system, with stainless steel armor and high-quality jacket, certified for multiple approvals, enabling reliable probe-sensor linking in demanding industrial environments. FAQ Q1: Is this cable compatible with all 3300 series probes? A1: Yes, provided you are using the correct transducer family (e.g., the 3300 XL

330904-00-09-10-02-05 Bently Nevada Proximity Probes Description T he330904-00-09-10-02-05 probe is part of the Bently Nevada 3300 XL NSv/NSv (Non-Standard view) proximity transducer family. Key features:“330904” → indicates the probe series: NSv probe, M8×1 thread, with armor.“00” → unthreaded length option (0 in)“09” → overall case length variant (9.0 in or 90 mm) (based on similar parts, e.g., 330904-00-09-05-02-05)“10” → cable/total length option (1.0 m) (in many listings

330101-00-47-10-02-00 Bently Nevada Proximity Probes Description T he 330101-00-47-10-02-00 probe is part of the 3300 XL 8 mm Proximity Transducer System.Non-contacting eddy-current proximity probe used to measure shaft position/displacement and vibration (via the larger 3300 XL system) by monitoring the gap between the probe tip and a conductive target (typically a shaft) and producing a voltage proportional to that gap.“8 mm” in the system name refers to the probe tip

330191-00-33-90-05 Bently Nevada Sensor Probe Cable Description T he Bently Nevada 330191‑00‑33‑90‑05 Proximity Probe (sometimes listed as “Sensor Probe Cable” but based on the datasheet it is actually a probe head variant). The information is drawn from the manufacturer’s datasheet for the Bently Nevada 3300 XL 8 mm family and from ordering‑info sources.This part belongs to the 3300 XL 8 mm Proximity Transducer System, specifically the Extended Temperature Range (ETR)

330103-02-06-10-02-05 Bently Nevada Proximity Probe Description T he Bently Nevada 330103‑02‑06‑10‑02‑05 Proximity Probeis part of the 3300 XL 8 mm Proximity Transducer System by Bently Nevada. According to the datasheet for the 3300 XL 8 mm system:“The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values.”The components in