Electrical Safety Test Equipment

IEC60068-2-75 / GB2423.55 Standard Spring Hammer Calibration Device for Spring Hammer Calibration Product Description: Spring impact hammer calibrator is based on all parts IEC60068-2-75 Appendix B requirements of normative documents tolerance manufacturing, most of the critical parts using special materials and special processing, accuracy and stability in the superior performance. Single-weight design, and supports the vast majority of domestic and foreign manufacturers of

IEC60335-2-25 Microwave Oven Door Endurance Tester For Microwave Door System Wear Resistance Test Product information: The microwave oven door endurance tester is designed and manufactured according to IEC60335-2-25. It is a dedicated tester which is used to inspect the wear resistance of the microwave door system, including the structure of the hinge, microwave seals and other related components that during the process of using. The device uses advanced PLC control system

AC Constant Current Power Supply APA3000 Series Product parameter • Input voltage range:1Ø2W+G 110V/220V±10% 220V±10% 3Ø4W+G 220V/380V±10% • Constant voltage temperature coefficient:50~100ppm/℃ • Constant current temperature coefficient:300ppm/℃ Product details High Performance • Digital Voltmeter and Current Resolution 4 Bit Half Display (Optional), AC Voltmeter and current Real Value Measurement • DDS waveform generator with frequency resolution of 6.5 bits • Maximum

Test pin, IEC 60335-2-80-Figure 102 Test pin Key A stopper pin B full thickness section with length at least equal to that of the original bolt C reduced thickness section with length at least equal to that of the original bolt a diameter same as the original bolt that connects the down rod to the motor b diameter 50 % “a” Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs

IEC60335-2-14 Soft wood soft wood having a cross-section approximately 50 mm × 100 mm*100mm

Lab Technical Solution of Refrigerator And Freezer Performance Refrigerator and freezer performance laboratory technical solutions This laboratory meets the performance and reliability testing needs of household refrigerators and refrigerators. It can test 6 household refrigerators or 6 refrigerators at the same time. By adjusting the temperature and humidity of the test environment to meet the working conditions required for refrigerator and freezer testing, the type tests

1000N Photovoltaic Battery Backplate Two-Way Peel Tester KP882001 Photovoltaic Battery Backplate Two-Way Peel Tester The KP882001 photovoltaic battery backplate two-way peel tester performs 90° and 180° peel tests using full digital power and displacement control with double closed-loop technology. Equipped with Taiwanese servo motors and controllers, precision worm gear reducers, and lead screw transmission, this system delivers optimal efficiency and performance. The

IEC 60335-2-84 Toilet Seat Endurance Test Apparatus Applying 1250N TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60335-2-84, 2nd Edition (2002) - A1/2008 - A2/2013 Household and similar electrical appliances – Safety – Part 2-84: Particular requirements for toilet appliances Standard requirement 21 .103.1 The appliance is subjected to an evenly distributed force of 1250 N applied perpendicularly to the seat for 4s by a rubber disc having a thickness of 10 mm, a

IEC60884 Three Station Flexing Test Apparatus for Rocking Motion Testing of Plug Power Cords Instrument Introduction 1.1 Main uses This instrument is mainly used to test the flexural fatigue strength of AC power cords and plug leads. It is suitable for rocking motion testing of plug power cords under a certain load. The instrument has no-load (only measures life, does not make open circuit judgment) On-off (makes open circuit judgment), external load (also equipped with load

Shore Hardness' gauge IEC 60335-2-80-clause.20.101 20.101 Fan blades, other than those of fans for mounting at high level, shall be guarded unless their leading edges and tips are rounded and – they have a hardness less than D 60 Shore Shore Hardness' gauge Type D: applicable to hard rubber, hard resin, acrylic, glass, cushiony plastic cement, printing plates, fiber, etc. Using methods When using single pointer models, one should place the sample in the solid plane, hold the

IEC 60335-2 Single Station Cordless Blender / Iron / Kettle Insert And Withdraw Endurance Tester Description: This is a multi function testing equipment can be used for verious cordless electrical appliance, include cordless blender, cordless iron, cord less kettle. Special designed clamping device and structure can tight fix the sample and adjust the position to test different product. PLC and touchscreen control system, make the test parameter setting very easy. All

Ring wave generatorZLB61012T Series The oscillation wave of the equipment may affect the reliable operation of the equipment and the system. The ringing wave is caused by the switching of the power supply and the control line switch or the lightning strike, and appears on the terminal of the equipment (device port). Products meet IEC61000-4-12 and GB/T17626.12 and IEC255-22-1,GB/T14598.13 standards. Meet the criteria: IEC /EN 61000-4-12GB/T17626.12IEC255-22-1,GB/T14598.13

Lightning surge generator1089 Series SUG 1089 series of products are made in accordance with the requirements of part 68 of the FCC of the Federal Communications Commission (FCC) on the protection of telecommunications products (such as telephone lines) against lightning surge waveforms. Its performance indicators cover the requirements of the standard.. Meet the criteria: FCC part 68/GR-1089-CORE Product characteristics: ■ meet and exceed IEC61000-4-5 and GB/T17626.5 latest

Symmetric Line Coupled NetworkDATA-CDN-4A m Voltage wave :1.2/50 s open circuit with 10/700μs( waveform generator output) Maximum voltage tested :6 kV Matching resistance :25 R,40R,100R,160R (plug type). Decoupled inductor :20 mH Coupling device :0.5 uF,90V gas discharge tube, clamp circuit optional Network communications :10 M/100M Product size 330×190×155 mm3 Weight :10 k g Customized Services To fulfill the diversified needs for clients, we gain experience of research and

IEC 60601-1 Spark Ignition Tester to check the RISK of fire in an OXYGEN RICH ENVIRONMENT for ME EQUIPMENT & ME SYSTEMS 1.According to standard: IEC 60601-1-Figure 34-figure37(clause 11.2.2) 2.Specifications Power Supply AC220V 50HZ According to the standard: IEC 60601-1-Figure 34-37 Test speed: 0-30 times/min (PLC control) Test times: 0-99999 can be set Oxygen speed: less than 0.5m/s,(can be set) Maximum output voltage (DC): 0-80V Maximum current output (DC): 2A weight and

IEC60990-Figure 3, 4, 5 Measurements of Prospective Touch Voltage Touch Current and Protective Conductor Current Standard: IEC60990-Figure 3, 4, 5

GB4706-1 / GB4943 Electrical Appliance Tester Tilt Test Bench , Inclining Test Bench Product information: This device complies with the standards of GB4706-1, GB4943 and GB8898 and IEC60335-1 and so on, the test bench consists of a work surface and an angle adjustment device, is suitable for all types of audio and video products, home appliances, kitchen equipments and similar electrical appliances doing mechanical stability test. The test sample was placed on the table to

IEC 60335-2-30 Clause 11 75mm Test Rod For Protective Performance Check Of Apparatus Structures And Shells Product Description: 1. According To Standard: IEC60335 2. It is used to the protective performance check of the apparatus structures and shells which is easy to access live parts Spectifications: Probe diameter 75mm Probe length 80mm Baffle plate diameter 95mm Baffle plate thickness 10mm

UL1017 figure 18 Horizontal Flexing Machine / Horizontal Reciprocating Test Apparatus Function Overview: This equipment is a series of vacuum cleaner test equipment designed according to the requirements of UL1017-8.13.2.2. During the test, one end of the current-carrying hose is fixed on the slider and then the roller is wound, and a weight of 4.54KG is attached to the end. The slider moves back and forth and tests 20,000 times. Features: 1. The crank linkage mechanism is

IEC60335-2-2 cl.21.102 Vacuum Cleaner Current-Carrying Hose Wear Testing Machine / Resistant to Abrasion Function Overview: This equipment is a series of vacuum cleaner test equipment designed according to the requirements of IEC60335-2-2/GB4706.7:201.102 and UL1017-8.14.2.2. During the test, one end of the current-carrying hose is fixed on the slider and then bypass the roller with the abrasive belt, a 1KG./1.13KG weight is attached to the end, and the slider moves back and