IEC62368 Test Equipment

Three vertical bar signal’ shall be used as defined in 3.2.1.3 of IEC 60107-1:1997 3.2.1 .3 Three vertical bar signal The three vertical bar signal produces three equidistant vertical white bars on a black background. The width of each bar is 1 /6 times the nominal horizontal width ( W ) of the picture. A line-time waveform of the signal is shown in figure 9. This signal has an APL of 50 % and includes the reference white level. It is suitable for setting the output signal

800N Test Device as per IEC 60601-1 clause.9.4.2.3b / IEC 62368-1:2018 clause 8.6.2.3 Technical Parameters: Standards IEC 60601-1,IEC 62368-1 Clause IEC 60601-1-clause.9.4.2.3b . IEC 62368-1:2018 clause 8.6.2.3. Weight load 800N Height Maximum lifting height of the weight 1500mm Lifting method: hand rotating winch Maximum bearing capacity of support 5000N Dimension 1100*800*1900mm can be folded

IEC 60601-1-clause.8.11.3.6 / IEC 62368-AnnexG.7.5 Cord guards / Non-detachable cord bend protection tester Technical Parameters: Applied standards IEC 60601-1,IEC 62368-1 Clause IEC 60601-1-clause.8.11.3.6 ,IEC 62368-AnnexG.7.5, Angle 0-90° (Manual setting) Angle accuracy: ±0.1° Table size 800*500mm Weight 50kg ( It consists of steel balls and cloth bags. The weight can be adjusted by the number of balls ) R gauge R1-R15 (1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 3.5 4 4.5 5 5.5 6 6

IEC 62368-1 Annex G.8.2.2 Resistor loading box 1. IEC 62368-1, Annex G.8.2.2 2. Resistance: 3840ohm(60W), 1920ohm(120W),960ohm(240W),480ohm(480W),240ohm(960W),120ohm(1920),60ohm (3840W),480ohm(short circuit) 3. The loading box should be metal enclosure with ground, wheel with stoper. Display of input voltmeter(Digital voltmeter),current(Digital ammeter). E-stop for disconnect all input voltage. Enough cooling fan to maintain the resistance constantly under high current. 4.