IEC62368 Test Equipment

IEC 62209-3 Fast SAR Automatic Measurement System,CSAR3D - SAR System With Novel Vector Array Technology,iec 62209 test equipment three dimensional visualisation of specific absorption rate visualisation of SAR peak values control of base station simulators automatic generation of reports SAR: the full English name of SAR is specific absorption rate, which is generally called electromagnetic wave absorption ratio or specific absorption rate in Chinese. It is the electromagnet

IEC 62209-3 Fast SAR Automatic Measurement System,CSAR3D - SAR System With Novel Vector Array Technology SAR: the full English name of SAR is specific absorption rate, which is generally called electromagnetic wave absorption ratio or specific absorption rate in Chinese. It is the electromagnetic wave energy absorption ratio of mobile phone or wireless product, which is defined as: under the action of external electromagnetic field, induced electromagnetic field will be

Test plug for mechanical tests on antenna coaxial sockets Reference Standard: IEC60065-figure 8 Specification: Endurance test: A test plug as shown in figure 8 is inserted and withdrawn from the socket 100 times. Care is to be taken not to damage the socket intentionally during insertion and withdrawal of the test plug.

IEC60065 clause 12.1.1 Bump Test Machine for Electronic Apparatus Testing with A Mass Over 7 kg I. Descriptions The KP-GT065 Bump Tester Machine is designed as per IEC60065-clause 12.1.1 ,which is used to tesr audio, video and similar electronic apparatus Bump test Apparatus with a mass exceeding 7 kg are subjected to the following test: The apparatus is placed on a horizontal support of wood which is allowed to fall 50 times from a height of 5 cm onto a wooden table. After

RD4L IT Test Equipment Battery Capacity Voltage Discharge Resistant Tester Battery capacity voltage discharge resistant tester RD4L 1 Introduction 1.1. Title Residual Discharge Automatic Test Software 1.0 Instruction Manual. 1.2. Purpose The purpose of this document is to explain how to use the residual discharge automatic test software V1.0 ;make it easier for users to operate. 2. The main program control and display interface Residual discharge automatic test software V2.0

RDL-320 Tv Signal Tester Transmission System Energy Efficiency And Display Performance Test RDL-320 TV Signal Transmission System 1 Overview 1.1 Product Introduction The product is used for digital TV testing and provides test signals for TV test experiments. The product can generate test signals CVBS, YPbPr, SDI, HDMI, and RF antenna interfaces to meet the test requirements of the main TV interface. 1.2 Application areas: 1. TV energy efficiency test; 2. TV display

IEC61588 / 60065 Mandrel Test Device for Insulation Material Layer Abrasion Test​ This Mandrel Test Device according to IEC61588 Fig 6 /IEC60950 appendix and IEC60065/GB19212 standard relate clause design manufacture dedicated instrument. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil shall be placed closely to the surface of the specimen and subjected to a pull

Reel Test Apparatus Put the dabber on the chuck, then lock Put the test round-wire inserted to dabber’s hole Add corresponding mass on wire , Make the wire bear the tension exactly to touch with the pole when the wire was winding. At the same time, avoid that Stretching and twisting with the wire. With 1 r/s ~ 3 r/s rotary the handwheel to winding , continuous to winding ten laps. After the winding, In accordance with the standard requirements to record and reportChange the

Curvature Radius Test Apparatus Functional description This test chamber is our company according to IEC60950-1:2005&GB4943.1-2011 standard NO.328 clause require to design manufacturer.This optical instrument test equipment is use for test of information technology equipment product’s meander & radius.The equipment is sample using that enlarge the samples may be adjusted in the computer test sample position scale with Intelligent optical measuring instrument, it can measure

Covering Scratch Tester Product details: The device is used to check abrasion strength of printed circuit boards scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests. The scratches are made by means of a hardened steel pin, the end of which has the form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0

RDL-318 TV Signal Transmission System 1 General 1.1 Introduction: The product is used to test digital TV. It provides test signals for the experiment of TV test. The product can produce test signal of CVBS, YPbPr, SDI, HDMI and RF antenna interface to meet the test requirements of major TV interfaces. 1.2 Application: 1. TV energy efficiency testing； 2. TV display performance testing； 3.TV other testing； 1.3 Features: 1.3.1 Video signal: Interface Composite,Component(YPbPr)

IEC 62368-1 Annex G.8.2.2 Varistor Overload Tester 1. IEC 62368-1, Annex G.8.2.2 2.Voltage Vr: 240V, 2Vr:480V, resistance accuracy ±3% R1 (16*Vr) : 16*240=3840Ω, current: 2Vr/R1=0.125A; 8x resistance R2 (8*Vr) : 8*240=1920Ω, current: 2Vr/R2=0.25A; 4x resistance R3 (4*Vr) : 4*240=960Ω, current: 2Vr/R3=0.5A; 2x resistance R4 (2*Vr) : 2*240=480Ω, current: 2Vr/R4=1A; 1x resistance R5 (1*Vr) : 1*240= 240ω, current: 2Vr/R5=2A; 0.5 x resistance R6 (0.5*Vr) : 0.5*240=120Ω, current:

IEC62368 Three Vertical Bar Signal RDL-100 video signal generator 1 Overview 1.1 Product Profile The product is used for the testing of digital TV, providing a test signal for television test experiments.The product can produce the video test signals for the CVBS, YPbPr and HDMI interfaces to meet the requirements of the TV test. 1.2 Application field: 1. TV safety test experiment; 2. TV electromagnetic compatibility test experiment; 3. Other related test experiments of TV

EC 62153-4-6,LV 215-2Test system for shielding effectiveness of electric vehicle cable by three coaxial injection method Two methods to detect the shielding performance of the coaxial cable In the signal transmission, Unshielded cables Compared to shielded cables, More vulnerable to electromagnetic interference, Thus to communication failure, Noise becomes larger, signal error and other phenomena. Upon obtaining the coaxial cable, How do we detect the shielding performance

TIA-5050-2018 Volume Control Test System Active Speech Level: The active level of speech or speech-like signals using a speech voltmeter as defined in ITU-T P.56, method B. Measures the active speech level by accounting for pauses that are a natural part of a speech signal. Call Box: The Call Box is the radio simulator used to establish the call with the Device Under Test (DUT). Call Box is synonymous with network system simulator, base station simulator, and radio communicat

UV Radiation Test Equipment , Xenon Test Chamber IEC62368-1 Standard requirement: C.2 UV light conditioning test C.2.1 Test apparatus Samples are exposed to UV light by using one of the following apparatus: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel temperature of 63 °C ± 3 °C in a relative humidity of (50 ± 5) %; or – a xenon-arc (see C.2.4) with continuous exposure for a

Qi-v1.3-FOD Reference Foreign Object Annex A Reference Foreign Object construction (normative) A.1 Reference Foreign Object #1 (RFO#1) A.2 Reference Foreign Object #2 (RFO#2) A.3 Reference Foreign Object #3 (RFO#3) A.4 Reference Foreign Object #4 (RFO#4)

IEC 60851-3 Mandrel winding tester Product Description Standard:IEC 60851-3-clause 5.1.1 The tension to be applied to the wire during winding on the mandrel is calculated from the wire diameter to be equivalent to 118 MPa ± 11,8 MPa (118 N/mm2 ± 11,8 N/mm2)

IEC 60851-5-Figure 3 U-bend specimen for the breakdown voltage test Product Description Standard:IEC60851-5-figure 3

EMVCo Torminal Praduct Intcroperability Test Syetem EMVCo L1 Contactless Test Solutions Standard interpretation 1. Test environment construction: A distance of at least 15cm shall be maintained from any metal object belonging to the positioning system 2. Verification test Through the standard: For all mobile devices (not necessarily consecutive successful transactions) and for each DUT sample, at least three-fifths of each mobile device transaction is successful 3. Compatibil