Hot Rolled Steel Bar

H13 1.2344 SKD61 Hot Work Tool Steel Sheet and Plate Pressure hot work die steel. The steel is electroslag remelted, material is uniform, good hardenability, with excellent mechanical processing performance and polishing performance, high toughness and plasticity, good high, low temperature wear resistance and high temperature fatigue and heat resistance. 1- Chemical Composition(%) C Si Mn P S Cr Mo V 0.30-0.40 1.20-1.60 0.30-0.50 ≤0.015 ≤0.003 3.5-4.5 0.80-1.20 0.80-1.00 2-

Hot Work Tool Steel 1.2344 Hot Rolled Steel Bar Diameter 12-160mm Equivalent grades: GB DIN AISI JIS ASSAB 4Cr5MoSiV1 1.2344 H13 SKD61 8407 Chemical composition(%): Grade C Si Mn P S Cr Mo V H13 0.32-0.45 0.80-1.20 0.20-0.50 ≤0.030 ≤0.030 4.75-5.50 1.10-1.75 0.80-1.20 SKD61 0.32-0.42 0.80-1.20 0.20-0.50 ≤0.030 ≤0.030 4.75-5.50 1.10-1.75 0.80-1.20 1.2344 0.38-0.42 0.80-1.20 0.30-0.50 ≤0.015 ≤0.020 4.80-5.50 1.20-1.50 0.90-1.10 4Cr5MoSiV1 0.32-0.45 0.80-1.20 0.20-0.50 ≤0.030 ≤0

Hot Rolled Alloy Tool Steel Round Bar 1.7225 / SAE4140 For Mechanical Introduction: Grade 1.7225/SAE4140 steel belongs to the ultra-high strength steel, high strength and toughness, hardenability is better also, no obvious temper brittleness, conditioning treatment after repeated impact resistance, high fatigue limit and good low-temperature impact toughness. Grade 1.7225/SAE4140 steel is suitable for large and medium sized plastic mold that requires certain strength and

Hot Rolled 1.2080 / D3 Alloy Tool Steel Bar Diameter 10-180mm Equivalent grades: GB DIN AISI JIS Cr12 1.2080 D3 SKD1 Introduction: Grade 1.2080 / D3 / Cr12 is a kind of alloy tool steel, has a good hardenability and good wear resistance, mainly used as under impact load is small, high wear resistance of cold die and punch, cold cutting scissors, drill sets, gauge, wire drawing die, stamping die, thread rolling plate, drawing die and screw thread rolling dies, etc. Chemical

1.2083 Hot Rolled Plastic Mould Steel Round Bar With Corrosion-resistant Introduction: Grade1.2083 / 420 mold steel has good optical properties and mirror finishing properties after smeling by electroslag heavy soluble cast. It has good abrasion resistance and good toughness high temperature plastic because of the high chromium content, so its excellent corrosion resistance, pre hardened corrosion mirror mould steel grade1.2083 / 420 is mirror steel against corrosion.

S50C Hot Rolled Carbon Steel Flat Bar To Make Middle-range Machine Used for making injection plastic mould, mould frame and som middle-range machine. ► Equivalent grades: GB(China) DIN(German) AISI(USA) JIS(Japan) 50# 1.1210 SAE1050 S50C ► Introduction: Grade S50C / 1.1210 / SAE1050 carbon steel is a high quality medium carbon steel, which adopted by the furnace, open-hearth, or oxygen converter steelmaking manufacture full killed steel having a uniform microstructure

Plastic Mould Hot Rolled Carbon Steel Flat Bar For 1.1210 / S50C / SAE1050 Similar grade: GB 50#, DIN 1.1210, AISI SAE1050, JIS S50C Chemical Composition(%): C Si Mn P S Cr Ni Cu 0.41-0.50 0.15-0.35 0.6-0.9 ≤0.035 ≤0.035 ≤0.25 ≤0.25 ≤0.25 Feature: 1, High-quality medium carbon steel,uniform characteristics of the microstructure. 2, Carbon content (mass fraction,%) ≥ 0.4, good wear resistance,ductility reduction. 3, Tempering must be quenched to avoid the occurrence of temper

GCr15 / EN31 / SUJ2 / SAE52100 / 100Cr6 Hot Rolled Steel Rod for Making Axle 1. Similar Grade: EN31, SAE52100, GCR15, SUJ2, 100Cr6 2. Main standard: GB JIS DIN ASTM/AISI/SAE GCr15 SUJ2 100Cr6 52100 3. Chemical composition: C Mn Si Cr P S Ni Cu Mo 0.95-1.05 0.20-0.40 0.15-0.35 1.30-1.65 ≤ 0.027 ≤ 0.020 ≤ 0.30 ≤ 0.25 ≤ 0.10 4. Available Size: Diameter (mm) Length (mm) 16,18,20,23,25,28,30,33,35,38,40,43,45, 48,50,55,60,65,70,75,80,85,90,95,100,110, 120,130,140,150,160,170,180

SCM440 / 1.7225 / SAE4140 Hot Rolled Alloy Special Steel Bar For Mechanical Similar grade: GB(China) DIN(German) AISI(USA) JIS(Japan) 42CrMo 1.7225 SAE4140 SCM440 Chemical composition: C Si Mn Cr P S Mo 0.38-0.45 0.17-0.37 0.50-0.80 0.90-1.20 ≤0.035 ≤0.035 0.15-0.25 Feature: 1, Good strength, hardenability and toughness. 2, High creep strength and long lasting strength under the high temperature. Applications: Used in the manufacture of high strength, large cross-section

Hot Rolled Annealed Steel Round bar SAE5140 / 40Cr For Machinery Manufacturing SAE5140 / 40Cr is China's standard steel GB, this steel is one of the most widely used steel manufacturing machinery. After quenching and tempering has good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. Good hardenability of steel, water quenching can be hardened to Ф28 ~ 60mm, oil quenching can be hardened to Ф15 ~ 40mm. In addition to

Hot Rolled 1.2738 / P20+Ni Pre-hardened Platic Mold Steel Flat Bar 1.2738 / P20+Ni is a large long-life plastic injection mold steel. 1.2738 is based on P20 steel, but added 1% Ni. Compared with P20, its strength, hardness and plasticity are improved. Can also improve the anti-oxidation properties. Usges: 1. Household appliances, computer cases and other molds; 2. High surface finish of the plastic mold; blow mold; 3. Due to high hardness, plastic mold can be used in the ider

1.2344 / H13 / SKD61 / 4Cr5MoSiV1 Flat Bar and Round Bar of Hot Work Tool Steel 1. Features a,Electro slag remelting, annealing with diffusion process and ultrafining heat-treatment has good microstructua homogeneity and finer dispersed carbides. b,High isotropy, aspect rations≥0.8 c,Good tempering performance, high toughness, high temperature strength, good thermal stability and thermal fatigue resistance. d,Annealing hardness≤230HB,quenching hardness 51-55HRC,tempering

1.2344/ H13/ SKD61 Alloy Steel Plate and Flat Bar for Hot Work Tool Steel Equivalent Grades GB DIN AISI JIS ASSAB 4Cr5MoSiV1 1.2344 H13 SKD61 8407 Features a, Electro slag remelting, annealing with diffusion process and ultrafining heat-treatment has good microstructua homogeneity and finer dispersed carbides. b, High isotropy, aspect rations≥0.8 c, Good tempering performance, high toughness, high temperature strength, good thermal stability and thermal fatigue resistance. d,

1.7225 / SCM440 / SAE4140 Hot Rolled Alloy Steel Round Bar for Mechanical 1, Equivalent grades: GB(China)DIN(German)AISI(USA)JIS(Japan)42CrMo1.7225SAE4140SCM440 2, Perform Standard: GB/T 3077-1999 CSiMnCrMoPSNi0.38~0.450.17~0.370.60~0.900.90~1.200.15-0.25≤0.018≤0.030≤0.012 3, Available size(mm) Flat Bar Size(mm)Round bar Size(mm)ThicknessWidthLengthDiameterLength10-200155-22002000-600035-2603000-6000 Listed specifications are only typical grades; products of required