Hot Rolled Carbon Tool Steel Flat Bar With Black Surface S50C / SAE1050
Hot Rolled Carbon Tool Steel Flat Bar With Black Surface S50C / SAE1050
S50C Tool Steel Bar
S50C steel is a high-strength medium carbon steel with low cold plastic deformation, poor weldability, poor hardenability but no temper brittleness and good machinability.
Chemical Composition(%)
| C | Si | Mn | P | S | Cr | Ni | Cu |
| 0.47-0.53 | 0.15-0.35 | 0.6-0.9 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | ≤0.25 |
Regular hot rolled S50C flat bar sizes
Thickness: 8-250mm
Width: 155-710mm
Length: 2200mm
Mechanical properties
Tensile strength σb (MPa): ≥ 630 (64)
Yield strength σs (MPa): ≥ 375 (38)
Impact toughness value αkv (J / cm2): ≥ 39 (4)
Hardness: None heat treatment, ≤ 241HB; annealed steel, ≤ 207HB
Applications:
1, For the manufacture of high wear resistance, dynamic load and impact of the role of small machined parts and spring pieces.
2, Can be used for a variety of cold mold die pad.
3, Standard template material.
Feature
High-quality high-carbon steel, the use of electric furnace, open hearth or pure oxygen converter made of all-steel steel, metallurgical structure with uniform characteristics.
The carbon content of the steel (mass fraction,%) ≥ 0.4, excellent wear resistance, ductility decreased, quenching easy performance and cracking, so quenching is extremely important and must be quenched after tempering to avoid temper brittleness.
Through the implementation of ball treatment, can improve the cutting performance of such carbon steel. The steel is usually tempered to a hardness of 19 ~ 22HRC after use to increase its cutting performance.
Delivery Time
Stock items 15-20 days; customized items 30-50 days.
Packing: Standard export packing; customers' special requests are accepted
Quality Condition
1. Both end of each bar must be cut as require
2. Ladle furnanced and vacuum de-gassed
3. Show heat No. on each bar
4. Surface condition the surface of the hot rolled square bar shall befree cracks, scar and wrinkles that affect the use of the billets. In case there is the above-mentioned defect, it shall be remove.
5. The mill test certificate shall show the chemical composition, and it is guaranteed that the chemical composition shall be within the limit stipulated in the contract.
About us
Guangzhou Changfeng Steel Co., Ltd is a mould steel stockist, we have our own factory and trading company.
Our main steels are carbon tool steel bar, plastic mold steel, hot work tool steel, cold work tool steel, alloy steel for mechanical, etc.
All material are with high quality and competitive price.
We are here waiting for a cooperation chance between us, contact us and you will have one more loyal mold steel supplier!
More photos
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.