Nickel Cobalt Alloy

CoCr20Ni16Mo7 (Phynox) is an austenitic cobalt-based alloy (40%Co, 20%Cr, 16%Ni et 7%Mo) strengthened by cold work and capable of additional hardening by aging. It is well-known for its very high strength, high hardness, excellent formability, excellent corrosion resistance, and high fatigue strength. It is highly resistant to sulfide stress corrosion cracking, and as a result is the alloy of choice in the most demanding sour well environments. Chemical composition(weight, %)

Stellite 6B, commonly known as cobalt-chromium-tungsten alloy. It is produced through a hot forged process and get better mechanical properties than Stellite 6- casting version. This material is widely used in high temperature and high pressure valves, fluid valve seats, bearings, sinking rollers, guide rollers, stamping dies, extrusion dies, thermal Forging dies, saw teeth, spiral push rods, screws, screw rods, chemical fiber cutting knives, molten metal working conditions,

R31537 is a cobalt-based superalloy with high chromium and molybdenum. Its high corrosion resistance makes it particularly suitable for the production of implants in contact with living tissue. The composition is specially optimized for closed die forging. The high mechanical strength that can be achieved during this process results in a steel with excellent fatigue strength properties while maintaining good toughness. Therefore, with R31537 it is possible to produce very

ERNiCrMo-3 is usually used for welding of various erosion resistance and gap corrosion alloys. It is also known as alloy 112. The minimum alloy materials used in these electrodes are molybdenum modified 317 stainless steel. The ERNiCrMo-3 electrode is used in the richer alloy composition in the nickel-chromium-iron-molybdenum series, which can reach up to 625. Alloys welded with ERNICRMO-3 include Incoloy 825 and Alloy 20. This type of electrode is widely used because its

R31537 Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants per ASTM F1537 R31537 is a CoCrMo alloy typically used for surgical implants. Its high corrosion resistance makes it particularly suitable for the production of implants in contact with living tissue. The composition is specially optimized for closed die forging. The high mechanical strength that can be achieved during this process results in a steel with excellent fatigue strength properties while

Xunshi 6B alloy(UNS R30016, AMS 5894) is produced through Powder Metallurgy Process. It has enhanced physical & material properties. The material has equal properties as forged Stellite 6B in toughness and weldability, superior abrasive & erosive wear properties and superior corrosion resistance compared to a cast or welded Stellite 6. With its excellent wear characteristics, hot hardness, good corrosion resistance and superior mechanical properties, Stellite 6B has been the

Diaphragm Diaphragm seals utilize a thin, highly compliant or flexible diaphragm between the process medium and the pressure containing internals of the pressure instrument. Hastelloy C22 is a reasonable diaphragm materials. Given that the customer has the final word materials such as Hastelloy C276, Hastelloy C22, Monel 400, and tantalum are materials commonly used in diaphragm seals for chemical and petrochemical applications. In some cases, the entire diaphragm seal is

Haynes 188 is a well-known grade of Cobalt alloy for its excellent high-temperature strength and good oxidation resistance to 2000°F (1093°C), as well as its excellent resistance to molten chloride salts, and good resistance to gaseous sulfidation. It is also called GH5188 in China and used a lot in aerospace industry. Xunshi is proud to offer Haynes 188 cold rolled sheet of thickness ranges from 0.01mm to 3.0mm. The width ranges from 300mm to 1219mm depands on the thickness

Stellite 6B (UNS R30016) AMS 5894 cobalt-based alloy with great wear, erosion and abrasion resistance Stellite 6B is a cobalt-based alloy with great wear, erosion and abrasion resistance. It is also known as Alloy 6B or UNS R30016 per AMS 5894. High hardness carbide helps Stellite 6B get high wear resistance; while maintaining high-temperature strength and high-temperature wear resistance, the forging deformation process maximizes the toughness of the material. Stellite6B is

Stellite 6B is a CoCrW alloy. It is widely used in wear environments where its low coefficient of friction minimizes the risk of seizure and wear, even in applications without lubrication. The material has extraordinary cavitation resistance even under constant erosion conditions. It can maintain high hardness when the temperature rises and restores its original hardness when the temperature drops. This unique property, combined with good corrosion resistance to a wide range

GH2747 Precipitation hardening high temperature alloy General GH2747 is a Fe-Ni-Cr-based precipitation hardening high-temperature alloy. It is used in a solid solution state. Its long-term operating temperature is 1100℃~1250℃, while its short-term operating temperature up to 1300℃. The alloy has high strength and good Structural stability, excellent oxidation resistance and corrosion resistance. The alloy has good welding properties and can be welded through various processes

GH2747 is an iron-nickel-chromium-based precipitation hardening high-temperature alloy. It is used in a solid solution state. Its long-term operating temperature is 1100~1250°C, and its short-term operating temperature can reach 1300°C. The alloy has high strength and good structural stability, and has excellent oxidation resistance and corrosion resistance. The alloy has good welding properties and can be welded using various processes. Suzhou Xunshi New Materials can

Ni-Span-C Alloy 902 is a well-known nickel-iron alloy with a controllable thermoplastic coefficient which is the alloy’s outstanding characteristic. It is precipitation hardenable and could be processed to have a constant modulus of elasticity at temperatures from -50 to 150°F(-45-65°C). NI-SPAN-C nickel-iron-chromium alloy 902 is designated UNS N09902. The alloy is produced in the form of round bar, strip, wire, thin gauge strip, round tube. Special Bourdon tubular is

INCONEL alloy 617 is a solid-solution, strengthened, nickel-chromium-cobaltmolybdenum alloy with an exceptional combination of high-temperature strength and oxidation resistance. The alloy also has excellent resistance to a wide range of corrosive environments, and it is readily formed and welded by conventional techniques. Equal grades: UNS N06617/W.Nr. 2.4663a The alloy’s low density, compared with tungsten-containing alloys of similar strength, is significant in applicatio