Soft Magnetic Alloys

XUNSHI could supply Hiperco 50 HS cold rolled strip thickness range 0.10mm~0.50mm. Hiperco 50 HS alloy is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (2.4T) and a unique combination of high yield strength and moderate core loss. The alloy contains a niobium addition for grain refinement during mill processing and final heat treating to produce higher yield strength than conventional Hiperco 50(UNS R30005 alloy). XUNSHI is proud to

VACOFLUX 50 bar with high saturation and low coercive field strength VACOFLUX 50 belongs to VACUUMSCHMELZE, who is one of the world’s leading manufacturers of special alloys with a particular focus on magnetic and specific physical properties. VACOFLUX 50 is an alloy with a very high saturation, low coercive field strength and low specific core losses. It is available in various strip dimensions and also as solid material. A-ONE ALLOY has rich experience of supply Vacoflux 50

FeCo27 Iron-Cobalt Soft Magnetic Alloy ASTM A801 FeCo27 is one of A-ONE ALLOY's featured products. FeCo27 is a iron-cobalt soft magnetic alloy with saturation magnetic density up to 2.3 T. FeCo27 is a better choice when the fabrication is in consideration even HiperCo50 is somehow has better permeability and coercive force—even the difference is not big. The magnetic saturation of both alloys is nearly identical. And, Hiperco 27 does not exhibit the brittleness of Hiperco 50.

PRODUCT DESCRIPTION FeCo18 soft magntic alloy has been developed to improve the material performance of CoFe alloys with reduced cobalt content in applications with dynamic magnetization changes such as high performance magnetic actuators with short switching times. FeCo 18 is optimized to retain a high magnetic saturation while offering a significantly increased electrical resistivity compared to the complementary alloys FeCo17 and FeCo27(1J27, Hiperco27, Vacoflux), thus

Cobalt-Iron Soft Magnetic Alloy 1J27(HiperCo27) 1J27 is a Cobalt-Iron soft magnetic alloy, the main component of this alloy is 27% cobalt, the rest being other elements such as Fe and Ni, Cr, 1J27 iron-cobalt vanadium high-saturated magnetic induction soft magnetic alloy is one of the main products of our company. The alloy 1J27 has another names in other country, such as Hiperco27 (Carpenter), Vacoflux27 (VAC). Chemical Requirements(Weight Percent) c Mn Si P S Cr Ni Co V Fe

Introduction Permalloy 80 is 80% nickel with additions of iron and molybdenum as main elements in turn this alloy offers an extremely high initial permeability. Characters Permalloy 80 is only moderately resistant to moisture and atmospheric corrosion; it used mainly in in transformer cores but is well known for its magnetic properties which are used for shielding electrical components from magnetic fields. "HYMU 80" has a minimum DC permeability of 80,000 at a flux density

MIL N-14411 Comp 1 Sheilding Nickel Alloy Cold Rolled Strip HYMU80 Forms of supply: Strip Bar Plate Wire Tube Plate Capillary Forging Suzhou A-one Special Alloy Co. Ltd is a professional manufacturer of high performance alloy products. A-ONE ALLOY is more than a manufacturer of nickel/cobalt based alloys, but also a high performance alloys solution provider. Product Scope of A-ONE ALLOY · Inconel · Hastelloy · Incoloy · Monel · Nimonic · Nitronic · Haynes · Special Stainless

UNS R30005 Wrought Iron-Cobalt High Magnetic Saturation Alloy Round Bar in Stock UNS R30005 is used in magnetic components requiring high permeability at and above 15 kG (1.5 T) or high magnetic saturation. XUNSHI has rich experience of supply R30005 alloy in the form and physical condition suitable for fabrication into parts that will later be given final heat treatment to achieve the desired magnetic characteristics and, where required, mechanical properties. It covers

VACOFLUX 50 Soft Magnetic Strip with High Magnetic Saturation up to 2.4 T VACOFLUX 50 belongs to VACUUMSCHMELZE, who is one of the world’s leading manufacturers of special alloys with a particular focus on magnetic and specific physical properties. VACOFLUX 50 is an alloy with a very high saturation, low coercive field strength and low specific core losses. It is available in various strip dimensions and also as solid material. XUNSHI has rich experience of supply Vacoflux 50

HiperCo50 Cold Rolled Strip Iron-Cobalt Soft Magnetic Alloys High Saturation Iron-Cobalt XUNSHI supplies HiperCo 50 cold rolled strip with minimum thickness of 0.05mm. We are among the several TOP suppliers in China who are able to make this thickness. Our customers are from worldwide including EU&US. XUNSHI has rich experience of supply HiperCo50 parts, machined and heat treated. What's more, we are able to help our customers to improve the design of product. Diameter: 0.2-5

HiperCo50 is an iron-cobalt alloy used in magnetic components requiring high permeability at and above 15 kG (1.5 T) or high magnetic saturation. HiperCo50 High Soft Magnetic Alloys Saturation Iron-Cobalt Round Bar In fact Hiperco50 has the highest magnetic saturation of all soft-magnetic alloys and excels in application where this attribute is needed. Hiperco 50 maintains its strength after heat treating making it your best choice for application that experience high forces

1J22Nb0.3 Soft Magnetic Alloy with High Magnetic Saturation Iron-Cobalt Soft Magnetic Alloy 1J22Nb0.3 is based on 1J22 and added 0.3% Niobium(Nb) to improve the grain structure,and that greatly improving the mechanical properties of the alloy. 1J22 alloy is one of the highest saturation magnetic induction intensity (2.4T) in all soft magnetic alloys, the Curie point is up to 980℃, Saturatated magnetostrictIive coefficient is 60～100PPM. Due to the high Curie point, the alloy

ASTM A753 UNS N14080 is a commonly used wrought nickel-iron soft magnetic alloy produced or supplied expressly for use in magnetic cores and other parts requiring high magnetic permeability, high electrical resistivity, low coercive field strength, and low core loss. The material is capable of being produced in a wide variety of forms and conditions suitable for further manufacture into specific magnetic articles. The desired form and condition shall be specified and should

79HM Soft Magnetic Alloy for Magnetic Shielding High Initial Permeability 79HM is a highly magnetic nickel-molybdenum-iron alloy, with roughly 80% nickel and 15% iron and 5% molybdenum content. It's useful as a magnetic core material in electrical and electronic equipment. 79HM provides high initial and maximum permeabilities with low coercive force, low hysteresis loss, low eddy-current losses, and low magnetostriction which is critical for industrial applications. Chemical

1J85 Mu-metal Strip High Initial Permeability Low Coercive Force As a professional high-performance alloys supplier in China, A-one Alloy has very rich experience of supplying 1J85 soft magnetic alloy in forms of strip, wire, round bar and so on. Our customers are from worldwide and they trust us after the cooperation for years. 1J85 has high initial permeability and high saturation permeability and low coercive force in low-intensity magnetic field. 1J85 is generally used in

Mu-metal Shielding Alloy FeNi Soft Magnetic with very High Permeability A-ONE ALLOY supplies Mu-metal in forms of strip, sheet, plate, wire, rod, round bar, forging, tube, pipe, capillary as well as machined parts per customers' spec& drawing. Mumetal is a FeNi soft magnetic alloy with very high permeability. Mumetal is used for shielding sensitive electronic equipment against static or low-frequency magnetic fields. The name came from the Greek letter μ(mu) which represents

VACOFLUX 27 High Saturation Magnetic Alloy for High Performance Actuator Systems VACOFLUX 27 offers the highest saturation of all Fe-Co alloys. What's more, it shows an excellent ductility. It is available as hot-rolled, forged bars, cold rolled strips as well as cold drawn wire. Due to the relatively low electrical resistivity, it is commonly used for static applications. Density: 7.95 g/cm3 Electrical resistivity:19 µΩ - cm Curie temperature: 925°C Saturation magnetostricti

A-ONE ALLOY supplies 1J50 soft magnetic cold rolled strip with minimum thickness 0.05mm 1J50 is a widely used soft magnetic alloy in China. It is used where high initial permeability, maximum permeability, and low core loss is needed. Density: 8.2g/cm3 Curie point: 500°C Saturation magnetostriction: 25 ppm Applications Transformer cores, highly efficient motors, shielding, and specialized electronic devices, such as LF power transducers, chokes, relay parts, solenoids &

HiperCo50 Parts for Solenoid Valve and Electromagnet Machined and Heat Treated HiperCo50 is an iron-cobalt alloy used in magnetic components requiring high permeability at and above 15 kG (1.5 T) or high magnetic saturation. In fact Hiperco50 has the highest magnetic saturation of all soft-magnetic alloys and excels in application where this attribute is needed. Hiperco 50 maintains its strength after heat treating making it your best choice for application that experience

1J22 Soft Magnetic Alloys with High Saturation Magnetic Induction 1J22 alloy is one of the highest saturation magnetic induction intensity (2.4T) in all soft magnetic alloys, the curie point is up to 980℃, Saturatated magnetostrictIive coefficient is 60～100PPM. Due to the high Curie point, the alloy is allowed to operate at higher temperatures where other soft magnetic materials have been completely demmagnetized and maintain good magnetic stability, Due to the large