Permanent Magnet Alloy

2J4 Iron-Cobalt Hysteresis Permanent Magnet Alloy Corrosion resistance 2J4 is a Iron-Cobalt-Nickel-Vanadium hysteresis alloy which combines the advantage of high hysteresis loss and low magnetizing force. It exhibits the highest efficiency(loss per unit magnetizing force) of any known material. That is why it is widely used in hysteresis motor applications. 2J4 belongs to Iron-Cobalt Permenent Magnetic Alloy,this alloy is suitable for making high efficiency hysteresis motor

P6 alloy is a cobalt base precipitation hardened alloy which combined the advantages of high hysteresis loss and low magnetizing force. It is similar to Vicalloy-2J10 in China standard. Typical chemical composition P6 alloy Ni: 6.0% Co: 45.0% V: 4.8% Fe: Balance Chemical composition 2J4 (%, weight) C: 0.12 max P: 0.025 max S: 0.020 max Si: 0.70 max Mn: 0.70 max Co: 44.0~46.0 V: 3.5~4.5 Ni: 5.3~6.7 Fe: Balance Physical properties Density: 8.2g/cm3 Curie point: 1580°F/860°C

2J11 Iron Cobalt Vanadium Hysteresis Alloy Bar Forgings 2J11 is a deformable permanent magnetic alloy with good properties, capable of forging, rolling and drawing and cutting processing. The 2J11 permanent magnet alloy can be made into thin sections or complex shaped parts with different magnetic and high mechanical properties. The 2J11 alloy has good hysteresis performance within 2~5kA/m and good processing performance before tempering. Changing the tempering temperature

Vicalloy I Iron-Cobalt Permanent Magnetic Alloy 2J10 Strip 0.1～6.0mm XUNSHI is a professional supplier of 2J10 permanent magnetic alloy in rods, strips, Wire etc. 2J10 Similar model: Vicalloy I We have rich experience of producing Vicalloy I, this allows us to give our customers strong technical support for their applications of Vicalloy I in various industries. 2J10 can be precipitation hardened. It has good ductility, and could be cold processed by forging, rolling and

2J4 Strip Iron-Cobalt Permenent Magnetic Alloy P6 Strip 2J4 is a Iron-Cobalt- Vanadium Permanent Magnetic Alloy. P6 alloy is a cobalt base precipitation hardened alloy, similar to Vicalloy in China standard which combines the advantages of high hysteresis loss and low magnetizing force into one material It exhibits the highest efficiency (loss per unit magnetizing force) of any known material P6 alloy has been used for hysteresis motor rotor and magnetic brake Density: 8.16

Iron Cobalt Hysteresis Alloy 2J11 Good Corrosion Resistance 2J11 is a deformable permanent magnetic alloy with good properties, capable of forging, rolling and drawing and cutting processing. The 2J11 alloy has good hysteresis performance within 2~5kA/m and good processing performance before tempering. Changing the tempering temperature can change the working magnetic field in a wide range. Chemical compositions elements C P S Si Mn Co V Ni Fe % ≤0.12 ≤0.025 ≤0.020 ≤0.70 ≤0

XUNSHI is a professional supplier of 2J10 permanent magnetic alloy in Bars, strips, Wire etc. Chemical compositions Elements Weight(%) C ≤0.12 P ≤0.25 S ≤0.02 Si ≤0.70 Mn ≤0.70 Co 51.0~53.0 V 9.5~10.5 Ni ≤0.70 Fe Rem 2J10 Magnetic performance Hμ(kA/m) (Hμ/Oe) Bμ/T (Bμ/Gs) Pμ(104J/m3) Kμ 14.4~18.4(180~230) 0.9~1.2(9000~12000) 3.0 0.58 Application 2J10 is used to produce high efficiency hysteresis motor rotor and hysteresis brake. 2J10 wire can be used to make weigand wire in

2J4 Iron-Cobalt Permenent Magnetic Alloy For Magnetic Motor Rotor And Brake 2J4 is a type of Iron-Cobalt Permenent Magnetic Alloy,this alloy is suitable for making high efficiency hysteresis motor rotor with high operating temperature, and this alloy does not cause reduced magnetic performance in the range of +150~ -140 ℃. Density of 2J4:8.2g/cm3 Chemical composition(wt,%) C P S Si Mn Ni V Co Fe 0.12 max 0.025 max 0.020 max 0.50 max 0.50 max 5.30-6.70 3.50-4.50 44.0-46.0 Rem

Iron Cobalt Permanent Magnet Alloy 2J10 Cold Rolled Strip Thickness 0.05-1.0mm Vicalloy 2J10 can be precipitation hardened. It has good plasticity, and could be cold processed by forging, rolling and drawing and cutting. Usually, 2J10 is applied to motor equipment, such as hysteresis motor, hysteresis brake, etc. Fe-Co-V hysteresis alloys have good plasticity before tempering. After cold rolling (or drawing) with 90% strain, excellent hysteresis properties and strong magnetic

2J11 Deformable Permanent Magnetic Alloy Curie temperature 860 °C 2J11 is a deformable permanent magnet alloy with good plasticity and can be made to the forging, rolling, pulling and cutting, The 2J11 permanent magnet alloy can be made into thin sections or complex shaped parts with different magnetic and high mechanical properties. The 2J11 alloy has good hysteresis performance within 2~5kA/m and good processing performance before tempering. Changing the tempering

P6 Permenent Magnetic Alloy Cold Rolled Strip P6 alloy is a cobalt base precipitation hardened alloy which combined the advantages of high hysteresis loss and low magnetizing force. It is similar to Vicalloy-2J10 in China standard. Product Name Permanent Magnet Alloy Type FeCoVNi Equal grade 2J4(China) Form of supply Cold rolled strip, wire, round bar Thickness 0.05-1.0mm Certification Certification Density 8.2g/cm3 Machenical properties Good plasticity before tempering

Vicalloy I Strip Wire Cobalt Based Permanent Magnetic Alloy Vicalloy I, an Iron-Cobalt-Vanadium alloy, is normally supplied to customers in the solution-treating condition which is very ductile. In this condition, it can be punched, formed, bent, drawn and machined. We have rich experience of producing Vicalloy I, this allows us to give our customers strong technical support for their applications of Vicalloy I in various industries. Chemical composition of Vicalloy I

Iron-Cobalt Permenent Magnetic Alloy 2J4 Cold Rolled Strip 0.05-1.0mm 2J4 belongs to Iron-Cobalt Permenent Magnetic Alloy. This alloy is suitable for making high efficiency hysteresis motor rotor with high operating temperature, and this alloy does not cause reduced magnetic performance in the range of + 150~ -140 ℃. In all kinds of the Magnetic Alloys, 2J4 is the one with a long time application time and a large dosage. We can supply cold rolled strip of 2J4 alloy with

Vicalloy is a family of cobalt-iron-vanadium wrought ferromagnetic alloys which have high coercivity and are used to make permanent magnets and other magnetic components. Vicalloy is precipitation hardened and can be formed by a number of cold working techniques. It is commonly used in electromechanical device applications, such as Wiegand wires because it shows a large Wiegand effect. It consists of 52% cobalt, 10% vanadium, trace amounts of elements such as carbon and

Iron-Cobalt Permenent Magnetic Alloy 2J4 2J4 belongs to Iron-Cobalt Permenent Magnetic Alloy,this alloy is suitable for making high efficiency hysteresis motor rotor with high operating temperature, and this alloy does not cause reduced magnetic performance in the range of + 150~ -140 ℃ In all kinds of the Magnetic Alloys, 2j4 is the one with a long time application and a large dosage. After the years of exploration and practice, the technology and production process of the

Iron-Cobalt Permanent Magnetic Alloy 2J10 strip, Rod and wire XUNSHI is a professional supplier of 2J10 permanent magnetic alloy in rods, strips, Wire etc. 2J10 Similar model: Vicalloy I 2J10 can be precipitation hardened. It has good ductility, and could be cold processed by forging, rolling and drawing and cutting. Usually, 2J10 is applied to motor equipment, such as hysteresis motor, hysteresis brake, etc. Fe-Co-V hysteresis alloys have good ductility before tempering.

2J83, 2J84, 2J85 Wrought Iron-Chromium-Cobalt Permenent Magnet Alloys Iron-chromium-cobalt permanent magnet alloy not only has good ductility, but also has good magnetic properties. It is the most widely used deformable permanent magnet material at present. Its magnetic properties are comparable to cast aluminum nickel cobalt alloy, and the price is cheaper than iron cobalt vanadium permanent magnet alloy. The alloy is characterized by homogeneous composition, compact

2J10 Iron Cobalt Vanadium Hysteresis Alloy Round Bar for Hysteresis Motor Rotor 2J10 can be precipitation hardened. It has good plasticity, and could be cold processed by forging, rolling and drawing and cutting. Usually, 2J10 is applied to motor equipment, such as hysteresis motor, hysteresis brake, etc. Fe-Co-V hysteresis alloys have good plasticity before tempering. After cold rolling (or drawing) with 90% strain, excellent hysteresis properties and strong magnetic

2J9 Iron Cobalt Vanadium Hysteresis Alloy Srip for Hysteresis Motor Rotor 2J9 is an iron cobalt vanadium hysteresis alloy, which is mainly used to produce hysteresis motor rotor. After years of exploration and practice, our company hysteresis alloy 2J4, 2J9, 2J10 series of products technology, production technology is more perfect. Our R&D center has the authoritative experts of 2J4, 2J9, 2J10 hysteresis alloys in China, which can provide high quality products and precise

Fe-Cr-Co Permanent Magnet Alloy with Good Mechanical Workability 2J85 is a new type of permanent magnet. The properties of 2J85 are comparable to those of cast Al-Ni-Co magnets while it has a good ductility in the as-quenched state. 2J85 is specially suitable for making small and thin elements with accurated dimensions and complicated shapes. Specification: YB/T 5261-2016 Wrought Iron-Chromium-Cobalt Permanent Magnet Alloys Chemical composition Element C Mn S P Cr Co Si Fe