Nickel Cobalt Alloy

MP35N High Performance Nickel Cobalt Corrosion Resistance Alloy Cold Drawn Wire XUNSHI is pround to supply MP35N alloy in various forms for customers from worldwide. Our MP35N products were exported to EU&US with competitive prices while the quality is in the same level. And, our delivery is much more competitive as we are able to produce the produce in whole process, from melting to cold drawn process. MP35N is a nickel-cobalt based alloy that has a unique combination of

NI-SPAN-C alloy 902(N09902) is a Fe-Ni Alloy with controllable thermoelastic coefficient. The desired thermoelastic coefficient is then obtained by using cold work and the proper thermal treatment. Cold work produces internal strains, making the coefficient more negative. Thermal treatments, in the lower temperature ranges, relieve strain. They also cause complex ordering phenomena which make the coefficient more positive. Heating at temperatures above about 900°F causes the

Ultimet alloy(UNS R31233) is a cobalt-chromium-nickel-molybdenum-tungsten alloy for wear applications and general corrosion service. ASTM B815 covers the alloy in form of rod. The requirements for the chemical composition hardness and tolerance, tensile strength, yield strength, and elongation are specified. Ultimet is a STELLITE alloy-like wear resistance and HASTELLOY alloy-like corrosion resistance in a single, highly weldable material. ULTIMET alloy (UNS R31233) provides

ASTM F75 UNS R30075 Cobalt-28 Chromium-6 Molybdenum Alloy for Surgical Implants ASTM F75-2012 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) This specification covers the requirements for cobalt-28 chromium-6 molybdenum alloy unfinished investment product castings for surgical implant applications and casting alloy in the form of shot, bar, or ingots to be used in the manufacture of surgical

Haynes 282 Nickel Alloy for High Temperature Structural Applications HAYNES 282 is a wrought, gamma-prime strengthened superalloy developed for high temperature structural applications, especially those in aero and land-based gas turbine engines. It possesses a unique combination of creep strength, thermal stability, weldability, and fabricability. The alloy has excellent creep strength in the temperature range of 1200 to 1700°F (649 to 927°C), surpassing that of Waspaloy

HAYNES 25 with Excellent High-Temperature Strength and Good Oxidation Resistance XUNSHI supplies HAYNES 25 in forms of plate, sheet, strip, round bar, forging, ring, plate, wire, capillary, tube, pipe. We are working with Advanced Technology & Materials Co., Ltd to ensure the technology is up to date and we are always ready to supply the best HAYNES 25 products to customers from worldwide. HAYNES 25 is a Co-Ni- Cr-W alloy that combines excellent high-temperature strength with

MP35N High Performance Nickel Cobalt Corrosion Resistance Alloy Cold Drawn Wire MP35N is a nickel-cobalt based alloy that has a unique combination of properties – ultra high strength, toughness, ductility, biocompatibility, and outstanding corrosion resistance. MP35N is produced by vacuum induction melting and consumable vacuum arc re-melting containing 35 % nickel, 35 % cobalt, 20 % chromium, and 10 % molybdenum. Chemical composition Element Ni Cr Mo Ti Fe Mn Si C S P Co

L605 Alloy Excellent Performance in High-temperature up to 1800°F (980°C) Haynes 25 is a cobalt-nickel- chromium-tungsten alloy that combines excellent high-temperature strength with good resistance to oxidizing environments up to 1800°F (980°C) for prolonged exposures, and excellent resistance to sulfdation. Haynes 25 alloy could be fabricated and formed by conventional techniques, and has been used for cast components. Other attractive features include excellent resistance

UMCo50 with Excellent Thermal Shock Resistance and Wear Resistance Main Features UMCo50 is a heat-resistant cobalt alloy that has excellent thermal shock resistance and wear resistance. It also shows great strength against sulfur-and vanadium-attacks. Another feature is its higher melting point compared to other cobalt base or nickel base heat-resistant alloys. For example, the alloy used for skid rails at a steel mill undergoes regular use at 1,350°C. Thus UMCo50 shows

UMCo-50 With High Temperature Thermal Shock And Wear Resistance UMCo-50 Co50 with High Temperature Thermal Shock and Wear Resistance UMCo50 is a heat-resistant cobalt alloy with excellent thermal shock resistance and wear resistance performance. It has great strength against sulfur-and vanadium-attacks. UmCo-50 has higher melting point compared to other cobalt based or nickel based heat-resistant alloys. For example, the alloy used for skid rails at a steel mill undergoes

GH5188 Cobalt Nickel Alloy for Application below 1100°C UNS R30188 GH 5188 is a cobalt-based alloy which possesses a unique combination of properties. It has excellent high temperature strength and oxidation resistance to 2100°F (1150°C) combined with good post-aging ductility. It has average room temperature tensile properties in the bright annealed condition of 137.2 ksi (946 MPa) ultimate strength, 67.3 ksi (464 MPa) yield strength and 53% elongation. At 1800°F (980°C) the

AMS 5894 Cobalt Alloy Stellite 6B with Excellent Hot Hardness Stellite 6B offers both toughness and wear resistance. Even the material exhibits a modest hardness range of 33-43 HRC, the extensive work hardening transformation that the surface goes through provides exceptional wear resistance for such a tough material. Chemical composition Element C Mn Si P S Cr W Ni Mo Fe Co Weight(%) 0.09~1.40 0.5~2.0 0.2~2.0 0.04 max. 0.03 max 28.00~32.00 3.50~5.50 3.0 max 1.50 max 3.0 max

Thermco50 Cobalt-Base Heat Resistant Alloy UMCo-50 UMCo-50 is a cobalt-chromium-iron heat-resistant alloy with good resistance to thermal shock, oxidatoin, and corrosion, It has great strength against sulfur-and vanadium-attacks. UmCo-50 has higher melting point compared to other cobalt based or nickel based heat-resistant alloys. For example, the alloy used for skid rails at a steel mill undergoes regular use at 1350°C,so other alloys could not be used due to their low

Thermal Shock Resistance Nickel Based Alloys UMCO50 Forging Rod Seamless Pipe XUNSHI NEW MATERIALS CO LTD supplies UMCO50 in forms of forgings, round bar, tube and so on. UMCO50 is a heat-resistant cobalt alloy with excellent thermal shock resistance and wear resistance performance. It has great strength against sulfur-and vanadium-attacks. UmCo-50 has higher melting point compared to other cobalt based or nickel based heat-resistant alloys. UMCO50 is suitable for the

Thermal Shock Resistance Nickel Based Alloy Umco-50 Rods Forgings Xunshi supplies Umco-50 in forms of forgings, round bar, tube,seamless pipes and so on. UMCo50 is a heat-resistant cobalt alloy with excellent thermal shock resistance and wear resistance performance. It has great strength against sulfur-and vanadium-attacks. UmCo-50 has higher melting point compared to other cobalt based or nickel based heat-resistant alloys. For example, the alloy used for skid rails at a

High Temperature Resistance Nickel Based Alloys W.Nr. 2.4778 Rod Forging Tube W.Nr. 2.4778 is a heat-resistant cobalt alloy with excellent thermal shock resistance and wear resistance performance. We can supply W.Nr. 2.4778 in forms of Rods, forgings, seamless pipes, tube and so on. Chemical Composition (%, EN 10295) C 0.05-0.25 Si 0.50-1.50 Mn 1.5 P 0.04 S 0.03 Cr 27-30 Mo 0.50 Ni 4.0 Nb 0.50 Co 48-52 Fe Balance Shock Resistances Since thermal shock resistance was given

Seamless Pipe Dia 1-100mm GH2747 Precipitation Hardened Nickel Based Alloy General ЗП74 is a Fe-Ni-Cr-based precipitation hardening high-temperature alloy. It is used in a solid solution state. Its long-term operating temperature is 1100℃~1250℃, while its short-term operating temperature up to 1300℃. The alloy has high strength and good Structural stability, excellent oxidation resistance and corrosion resistance. The alloy has good welding properties and can be welded

Heat Resistant Nickel Based Cobalt Alloy W.Nr. 2.4778 Rod Forging Tube Heat-Resistant Nickel Based Cobalt Alloys W.Nr. 2.4778 Rod Forging Tube W.Nr. 2.4778 is a heat-resistant cobalt alloy with excellent thermal shock resistance and wear resistance performance. We can supply W.Nr. 2.4778 in forms of Rods, forgings, seamless pipes, tube and so on. Chemical Composition (%, EN 10295) C 0.05-0.25 Si 0.50-1.50 Mn 1.5 P 0.04 S 0.03 Cr 27-30 Mo 0.50 Ni 4.0 Nb 0.50 Co 48-52 Fe

Xunshi could supply UNS R30075 CoCrMo cold rolled strip for medical/dental application. We are one of the few suppliers who can provide this kind of products with good quality. Specification: ASTM F 75 Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) This specification covers the requirements for cobalt-28 chromium-6 molybdenum alloy unfinished investment product castings for surgical implant applications and casting alloy in

Stellite 6B and 6K (forging) are mainly used in heat-resistant and wear-resistant media with impact requirements. Stellite 703(casting) is mainly used in high temperature wear-resistant environment. T-400 Casting is used in areas requiring higher thermal hardness in heat-resistant environment Main character of Stellite 703 Hardness HRC56 Elongation less than 1% Carbide strengthening Co-Cr-Mo alloy Mo＞10% in composition Heat resistance and wear resistance while better