Fiber Optic Cable

OM3 8F Breakout 2mm LSZH Aqua Multi-fiber Indoor Fiber Cable Break-out cable (4-48 fibers) Break-out cable use Simplex cable (0.9mm flame-retardant tight buffer fiber, Aramid yarn as strength member)as subunit. A fiber reinforced plastic (FRP) locates in the center of core as a no-metallic as strength member. The subunits are stranded around the cable core. The cable is completed with a PVC or LSZH jacket.

SM 9/125 2F 3*2mm 2FRP LSZH Butterfly Flat Ivory Armored Indoor Fiber Drop Cable FTTH Indoor Drop Cable uses butterfly flat structure, whose optical fiber unit is positioned in the center. Two parallel Fiber Reinforced Plastic (FRP) strength members are placed at the two sides. Then, the cable is completed with LSZH sheath. FTTH indoor cable has a much greater bandwidth to carry data and less susceptible to interference than common indoor fiber cables. With small diameter,

Standard Loose Tube No-armored GYTA Outdoor Fiber Cable Product details The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum

Stranded Loose Tube No-metallic Strength Member No-Armored CableⅠGYFTY Outdoor Fiber Cable Product details The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After the cable core is filled

SM 9/125 3*2mm 2FRP LSZH White Indoor Fiber Drop Cable FTTH Indoor Drop Cable uses butterfly flat structure, whose optical fiber unit is positioned in the center. Two parallel Fiber Reinforced Plastic (FRP) strength members are placed at the two sides. Then, the cable is completed with LSZH sheath. FTTH indoor cable has a much greater bandwidth to carry data and less susceptible to interference than common indoor fiber cables. With small diameter, water-resistant, soft and

Stranded Loose Tube No-metallic Strength Member -Armored CableⅠGYFTY53 Outdoor Fiber Cable Product details The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. Then the cable core is covered

Standard Loose Tube Armored CableⅠ GYTY53 Outdoor Fiber Cable Product details The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The

Stranded Loose Tube No-metallic Strength Member -Armored CableⅡ GYFTA53 Outdoor Fiber Cable Product details The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. An aluminum Polyethylene

Standard Loose tube No-Armored Ribbon Fiber Cable GYDTS Outdoor Fiber Cable Product details The ribbon 4, 6,8,12 fibers, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and

Stranded Loose Tube No-metallic Strength Member Armored Cable Ⅲ GYFTA Outdoor Fiber Cable Product details Outdoor Optical fiber cable positioned between CO and first DP in FTTX network. Used as mainline cable which environment is in Buried ,Aerial, under earth Pipes, Poles etc. The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a waterresistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of

OM1 12F Mini-breakout 0.9mm LSZH Orange Multi-fiber Indoor Fiber Cable Non-unitized Tight-Buffered Mini break out (4-48 fibers) Non-unitized Tight-Buffered Mini break out cable contains several tight-buffered fibers bundled under the same jacket with Kevlar strength members and sometimes fiberglass rod reinforcement to stiffen the cable and prevent kinking. With aramid yarn as a reinforcing member, the cable is light weight, softness and easy to peel. It is widely used as

Duplex Twin Flat SM 2F 3.1*5.2mm LSZH Yellow Indoor Fiber Cable​ Duplex flat cable use 900um flame-retardant tight buffer fiber as optical communication medium, the tight buffer fiber wrapped with a layer of aramid yarn as strength member units, such unit is extruded with a layer of PVC or LSZH material as inner jacket. The cable is completed with a figure 8 PVC or LSZH jacket. Standards Comply with standard GR-409, IEC 60794-2-10/11, meet the requirements of UL approval for

OM3 12F mini-breakout 0.9mm LSZH aqua multi-fiber indoor fiber cable Non-unitized Tight-Buffered Mini break out (4-48 fibers) Non-unitized Tight-Buffered Mini break out cable contains several tight-buffered fibers bundled under the same jacket with Kevlar strength members and sometimes fiberglass rod reinforcement to stiffen the cable and prevent kinking. With aramid yarn as a reinforcing member, the cable is light weight, softness and easy to peel. It is widely used as

MM OM3 50/125 Dual 3mm Aqua LSZH Armored Indoor Fiber Cable With Steel Tube The armored cable is a special cable with a stainless steel tube inside the cable which could protect the fiber bite by ant, mouse related rodent animals. This cable could be used as normal electric wire. Material: Fiber type: G652D,G657,G655,OM1,OM2,OM3,OM4 Cable OD: 0.9mm, 2.0mm, 3.0mm etc. Jacket material : PVC or LSZH or PE Features: High anti-tensility; High anti-pressure High bent Resistance;

MM 50/125 Duplex 3mm LSZH Orange Armored Indoor Fiber Cable With Steel Tube The armored cable is a special cable with a stainless steel tube inside the cable which could protect the fiber bite by ant, mouse related rodent animals. This cable could be used as normal electric wire. Structure Material: Fiber type: G652D,G657,G655,OM1,OM2,OM3,OM4 Cable OD: 0.9mm, 2.0mm, 3.0mm etc. Jacket material : PVC or LSZH or PE Features: High anti-tensility; High anti-pressure High bent

Duplex Twin Flat OM3 2F 3.1*5.2mm LSZH Aqua Indoor Fiber Cable​ Duplex flat cable use 900um flame-retardant tight buffer fiber as optical communication medium, the tight buffer fiber wrapped with a layer of aramid yarn as strength member units, such unit is extruded with a layer of PVC or LSZH material as inner jacket. The cable is completed with a figure 8 PVC or LSZH jacket. Standards Comply with standard GR-409, IEC 60794-2-10/11, meet the requirements of UL approval for

SM 9/125 0.9mm Loose Buffer Yellow Fiber Indoor Fiber Cable Buffered fiber is produced as the fiber is sheathed by LSZH/PVC/Hytrel buffer material. The selection of Top-quality fiber, specific production equipment and accurately designed die make the best performance of product. his cable is especially used in optical connections in optical communication equipment rooms and optical distribution frames, optical apparatus and equipment. Characteristics Select high quality fiber

MM 62.5/125 OM1 Dual 3mm Black PE Armored Indoor Fiber Cable With Steel Tube The armored cable is a special cable with a stainless steel tube inside the cable which could protect the fiber bite by ant, mouse related rodent animals. This cable could be used as normal electric wire. Material: Fiber type: G652D,G657,G655,OM1,OM2,OM3,OM4 Cable OD: 0.9mm, 2.0mm, 3.0mm etc. Jacket material : PVC or LSZH or PE Features: High anti-tensility; High anti-pressure High bent Resistance;

FTTH Fiber Optic Figure 8 Aerial Self-supporting Drop cable-GJYXFCH Self-supporting FTTH drop cable is constructed with one or two single-mode fiber (G.657A ). The cable is protected by a dielectric strength member made of fiberglass reinforced plastic (FRP), steel wire and a LSZH outer jacket. Designed for outdoor installation, the cable is well suited for connections between the dome closure and small dwelling unit/warehouse and independent villas. Characteristics l Self

All Dielectric Self-supporting Aerial Cable ADSS Outdoor Fiber Cable Product details ADSS cable is loose tube stranded. Fibers, 250µm, are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is