Electrical Safety Test Equipment

150V Electrical Safety Test Equipment 60A 300W DC Electronic Load 1. Introduction The new generation DC electronic load has the features of high speed and accuracy, the resolution can reach 0.1mV, 0.01mA. DC electronic load is mainly used in production line, like charger, battery, switch, cable). 2. Parameters: Model RK8511 RK8512 Input Voltage 0-150V 0-150V Current 0-30A 0-60A Power 150W 300W CV mode Range 0-20V 0-150V 0-20V 0-150V Resolution 1mV 10mV 1mV 10mV Accuracy 0.03

JIS1091-1992 Textiles Vertical Flammability Test Apparatus with 11mm Igniter 1. Introduction FZP-2 Textiles vertical flammability test apparatus is applied to test the burning behaviour of woven fabric, knitted fabric, coated fabric and Laminated products. The equipment is designed according to GB/T5455-1997 and JIS1091-1992. 2. Parameter Burner Φ11mm ± 0.3mm igniter Burning angle 25° or 90° Flame height 30mm ± 2mm to 50mm±2mm (adjustable) Burning time 0-999.9s±0.1s

5TΩ Electrical Safety Testing Machine 500V LCD Insulation Resistance Tester 1. Introduction Insulation resistance tester is an equipment to test the insulation performance of household appliance, lighting equipment and etc. It has the features of fast, stable, convenient and judgment. RK2683 series are designed for labs, RK2681 series are designed for site test. 2. Parameters Model RK2683B RK2683A RK2681 RK2681A Test range 10KΩ~5TΩ 10KΩ~10TΩ 100KΩ~5TΩ 100KΩ~10TΩ Accuracy R

UL94 Electrical Safety Test Machine Horizontal Vertical Flame Tester with Bunsen Burner 1. Introduction HVR-4 Horizontal and vertical flame test apparatus is designed according to UL94, IEC60695-11-4 and IEC60695-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. HVR-4 horizontal and vertical flame test apparatus is applied to the V-0, V-1, V-2, HB and 5V materials, it is widely used in the R&D department,

IEC60335-1 Electrical Safety Test Equipment 60rpm Power Cord Flexing Test Apparatus 1. Introduction Power cord bend test machine is completely meet the requirements of GB4706-1 clause 25.14, IEC60335-1 clause 25.14/figure 8, VDE and UL standards. It is applied to do the bend test of power cord of small household appliance and lighting fixture, like coffeemaker, electric iron and etc. The test times can be preset (6 digits), and auto shut down. Equip with 3KW transformer can

10KV Output Voltage Electrical Safety Test Equipment for Withstand Voltage Testing 1. Introduction of Withstand Voltage Tester Withstand voltage tester is applied to the fields of household appliance, motor, lighting appliance, compressor and etc. to test the break voltage, leakage current and other electronic safety performance. The tester meets the requirements of IEC60335,IEC60598 and IEC60950. 2. Parameters of Withstand Voltage Tester: Model RK2671 RK2671BM RK2671CM

ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus for Testing Auto Cables 1. Introduction The scrape abrasion test apparatus is designed to meet the test requirements of ISO6722-1 clause 5.12.4.2 and figure 7, DIN72551-5, QC/T-730, JASO D611-94 and VW60306 for testing the auto cables resistance to scrape abrasion. The apparatus consisted a device to abrade the surface of the insulation of the test sample and a counter to record the numbers of cycles to failure. The needle

IEC61010-1 Flammability Testing Tracking Index Test Device 1. Introduction The tracking index test device is designed according to the standards IEC 60112, GB/T 4207, IEC62368-1 clause 5.4.3.3, IEC60598-1 clause 13.4, IEC60601-1 clause 8.9.1.7, IEC60335-1 clause 29, IEC61010-1 clause 6.7.1.3, IEC60884-1 clause 28.2, and BS1363-1 clause 8.2 Appendix C. It is widely used in material testing on lamps, household appliances, IT/AV appliances, and electrical accessories. The

PLC Type 50W and 500W Horizontal and Vertical Flame Tester According to UL94 and IEC60695-11-4/3 1. Introduction Horizontal and vertical flame test apparatus is applied to 50W vertical flame test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment, low-voltage apparatus, household appliance, motor and etc..

PLC Type Glow-Wire Tester According to IEC60695-2-10 to IEC60695-2-13 1. Introduction Glow wire testing is an electrical safety test designed to evaluate the flame resistant properties of plastic materials used in electrical devices. Its purpose is to protect against the risk of fire from overheated or electrically energised parts which may cause the plastic material to ignite. This may occur in normal use, under reasonable abnormal use, malfunction or failure of the product.

IEC60335-2-23 Device for Testing Helmet-Type Hairdryers Under Normal Operation 1. Introduction The device for testing helmet-type hairdryers is designed to meet the test requirements of IEC60335-2-23 clause 3.1.9, it is consisted by test bench, dull blackpainted wooden sphere and wire frame. helmet-type hardryers are operated with the axis of the hood inclined at an angle of 60° to the horizontal or the maximum angle allowed by the construction if this is less. A dull black

Portable Medical Equipment Handle Strength Test Apparatus as Per IEC60236-1-2018 clause 8.8 1. Introduction The handle strength test apparatus is designed to meet the test requirement of to IEC60236-1-2018 clause 8.8, GB9706.1-2007 clause 21. It’s applied to test the strength of handle for lifting or carrying the equipment, like of portable medical equipment. A weight exerts a force of 3 times or 2 times the weight of the equipment shall be uniformly applied over a 75mm width

Three Phase Digital Power Meter with 600V Voltage and 40A current 1. Introduction of Three Phase Digital Power Meter The digital power meter is not only used to measure the single-phase measurement function of each input unit, but also the measurement function (∑) function of a wiring group composed of multiple input units. It can be used to test the AC voltage (U), AC current (I), power factor (λ), active power (P), apparent power (S), reactive power (Q), phase difference (Ø

Temperature-Controlled Battery Short Circuit Test Chamber 1. Introduction The b attery s hort- c ircuit t est c hamber is designed for conducting external short-circuit tests on primary lithium batteries, other primary batteries, lithium-ion batteries ( used in digital electronic products such as laptops and video cameras), as well as Ni-MH, Ni-Cd and lead-acid batteries (used in power tools, toys, electric bicycles and similar products). It is designed to meet the test

IEC60335-2-23 Electrical Safety Test Equipment For Testing Helmet Type Hairdryers Device for Testing Helmet-Type Hairdryers Under Normal Operation Introduction This specialized testing device is engineered to meet the rigorous requirements of IEC60335-2-23 clause 3.1.9 for helmet-type hairdryers. The complete test system consists of a test bench, dull black-painted wooden sphere, and wire frame assembly. During testing, helmet-type hairdryers are operated with the hood axis

Upolished Aluminum Vessels for Normal Operation Test to Hotplates and Hob Elements IEC60335-2-6 The upolished aluminum vessels simulate cooking appliances to perform normal operation tests on hotplates, hob elements, and electric cooking plates. These vessels are constructed from unpolished commercial quality aluminum, feature a flat bottom, and come with a lid. The base of the vessel is non-convex, with concavity not exceeding 0.05mm. Design Standards The aluminum vessels

Low Carbon Steel Vessels for Induction Hotplates to Perform Normal Operation Test IEC60335-2-6 The low carbon steel vessels simulate cooking appliances for performing normal operation tests on induction hotplates. These vessels are made of low carbon steel with a maximum carbon content of 0.08%, featuring a high-temperature non-stick coating. The cylindrical design excludes metallic handles or protrusions. Key Specifications The base diameter must match or exceed the cooking

IEC60335-2-25 Clause 18 Microwave Oven Door Endurance Tester PLC Control The microwave oven door endurance tester is designed to meet the test requirements of IEC60335-2-25:2020 clause 18, ensuring door systems including hinges, microwave seals, and associated parts can withstand wear expected in normal use. Product Overview This advanced testing equipment features PLC and touch screen control, allowing preset test angles and speeds. Equipped with a manipulator, it realistica

IEC60335-2-25 clause 18 Microwave Oven Door Endurance Tester 1. Introduction The microwave oven door endurance tester is designed to meet the test requirements of IEC60335-2-25:2020 clause 18, the door system of the microwave oven, including hinges, microwave seals and other associated parts shall be constructed to withstand wear that may be expected in normal use. This equipment is controlled by PLC and touch screen, the test angle and speed can be preset; equipped with

Spark Ignition Equipment for Testing Electric Blankets Conforming to IEC60335-2-17 The electric blanket spark ignition test apparatus is specifically designed to evaluate the flame retardancy of electric blankets according to international safety standards. This equipment verifies whether electric blankets will overheat or burn during flashover conditions in charged bodies, ensuring product safety and compliance. Product Introduction This specialized testing equipment is