Electrical Safety Test Equipment

Handheld Digital Force Gauge Pull Push with Force Test Stand 1. Introduction Digital force gauge is widely applied for compression and tension test, breaking test, material strength test and many other different fields, in order to get more accurate result, user can reset the acceleration of gravity as local, and match a suitable test stand for testing,the digital force gauges have function of high-low limit preset for alarm, test record can be recalled for checking.The

1. Introduction The platinum electrode conforms to IEC60112 figure B1, the material of the head (5mm) is made of platinum, the other parts is made of brass, the platinum electrode should be equip with tracking index test apparatus 2. Parameter Size of platinum electrode (5±0.1)mm*(2±0.1)mm*(≥12)mm brass extension size 10mm*2mm*38mm Angle of chisel-edged 300±20 Material of the tip Platinum (purity

IEC60695-2-10 Fire Testing Equipment Glow Wire Tester with Observation Window 1. Standard of Glow Wire Tester: The glow wire tester is designed as perIEC60695-2-1, IEC60695-2-10~IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), < basic testing methods of Glow wire, basic methods of Glow wire device> and IEC829, UL 746A, DIN695, VDE0471 etc. standards. 2. Introduction of Glow Wire Tester The glow wire tester is designed to carry out fire hazard testing on electrotechnical

200MHz 7 inch TFT - LCD Digital Oscilloscope with 2 Channel and Screen Protect Function 1. Specifications of Digital Oscilloscope: 1.1 Five trigger function, Edge, pulse width, slope, video, alternating 1.2 Five arithmetical operation: +,-,*,/,FFT 1.3 6 hardware frequency meter real-time count display 1.4 Screen protect function 1.5 7 inch TFT-LCD display, resolution 800*480 2. Parameters of Digital Oscilloscope: Bandwidth 200MHz Channel 2 Sample rate 500MSa/s Memory depth

Luminaire Short Circuit Protection Test Chain with Resistance Value of 2.5Ω/m±20% 1. Usage 1). The resitance value of the test chain should be checked before measurement to make sure it is in the range of 2.5±20%Ω. 2). To test the distance beween conductors of SELV parts, record as X. 3). the test chain is hung over the accessible uninsulated SELV parts. And two ends of test chain loaded with a maximum of 250g weights or equal to 15*X. 4). Test sample is operated at 0.9 to 1

1. Introduction of Tumbling Barrel Tester: Tumbling barrel Tester is designed according to IEC60598-1 clause 4.13.6 and figure 25 for plug ballast, transfomers and socket outlet. The tumbling barrel is turned at a rate of five revolutions per minute and 10 falls per minute, the sample falls from a height of 50cm on to a steel plate 3 mm thick. After the test, the sample

Touch Screen Swivel Appliance Mechanical Life Test Equipment According to IEC60335-2-23 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 clause 11.101, it is applied to do flexing test for appliance for skin or hair care Appliance with swivel connection to check the mechanical life and temperature rise. The equipment adpots floor-stand structure and controlled by PLC and touch screen, the test frequency and speed can be

4.5KG Stainless Steel Test Load for Rotating Spits According to IEC60335-2-9 Figure 102 1. Introduction Load for testing rotating spits is designed according to IEC60335-2-9 figure 102, it is for bearing capacity test of rotatin spits. 2. Parameter Weight 2.5kg Material Stainless steel Size Ф100.5×85.3mm 3. Picture

50W and 500W Horizontal and Vertical Flame Electrical Testing Machine According to IEC60695-11-4 / 3 1. Introduction Horizontal and vertical flame test apparatus is applied to simulate the fire at the early stage surround the electric and electronics appliance, and then evaluate the degree of fire hazard. It is designed according to UL94, IEC60695-11-4 and IEC60695-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the

5KV High Voltage Dielectric Strength Tester 0~100mA Leakage Current Comply to IEC60335-1 1. Introdcution AC/DC withstand voltage tester (hipot tester) is a equipment to test dielectric strength, can accurate and fast to test break down voltage, leakage current and other electric safety index. It is meet the requirements of IEC60335, IEC60598-1, IEC60065 and IEC60950. The model RK2672 series hipot testers are 0 to 5KV output, the model RK2672BM only has AC ouput, RK2672 (AM,

IEC60695-11-5 Needle Flame Flammability Testing Equipment - 12 Months Warranty 1. Introduction The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. The equipment specifies a needle-flame test to simulate the effect of a

Stainless Steel Compression Tester meets The Requirements of IEC60884-1 Figure 8 1. Standard: The compression tester is designed according to IEC60884-1 clause 24.5 figure 8 and GB2099-1-2008 clause 10.1. 2. Usage: It’s applied for the compression test of the plug to check whether the mechanical strength of the plug meet the requirements. 3. Sample range: Plug 4. Structure & Function: Specimens are subjected to a compression test, the temperature of the pressure plate, of the

Precision Insulation Resistance Test Equipment with Range of 500KΩ to 2GΩ 1. Introduction RK2682 Insulation resistance tester is sepcial designed according to IEC, BS and UL standards, the test voltage has DC500 and DC1000V ranges, the insulation resistance (0.MΩ～2000MΩ) has been devided into 4 ranges: 2MΩ, 20MΩ, 200MΩ and 2000MΩ. The insulation resistance tester has been widely applied to test household appliance, insulation material, lightings, motor and other electric

Leakage Current Tester 1. Introduction The leakage current tester is used to measure the leakage current unrelated to work generated by the working power supply (or other power supply) of the appliance through insulation or distributed parameter impedance. It is a equipment for measuring the insulation of the electrical appliance and the safety performance of the product. The output voltage can be adjusted at the range of 0~250V. It is widely used in household appliance,

RK2678XM 32A Ground Resistance Tester with Alarming Function Comply to IEC60065 and IEC60950 1. Introduction Ground Resistance tester is applied to test the ground resistance between conductive parts and earth terminal. Ground resistance is one of important index of safety performance of various electrical equipment. It measures the resistance of the ground loop at a high current (like 10A, 25A or 70A), and also tests the ground loop for large currents to avoid personal

RK7112 Programmable Insulation Withstand Voltage Test Equipment with Arc Detection Function 1. Introduction Insulation and withstand voltage tester is a kind of electric safety test equipment, widely used in the fields of transformer, equipment, components and etc. to test the performance of insulation resistance and withstand voltage with one equipment. The equipment can give an alarm at current and resistance, and have 5 groups memories. Meet the requirement of IEC (UL)

Withstand Voltage Electrical Safety Testing Equipment with 30KV Output 1. Introdcution AC/DC withstand voltage tester (hipot tester) is a equipment to test dielectric strength, can accurate and fast to test break down voltage, leakage current and other electric safety index. It is meet the requirements of IEC60335, IEC60598-1, IEC60065 and IEC60950. The model RK2674 series hipot testers are with high output voltage like 0~30KV, 0~50KV, 0~100KV and etc. 2. Features 1). The

0KV AC and DC High Voltage Test Equipment with Leakage Current Alarming Function 1. Introdcution AC/DC withstand voltage tester (hipot tester) is a equipment to test dielectric strength, can accurate and fast to test break down voltage, leakage current and other electric safety index. It is meet the requirements of IEC60335, IEC60598-1, IEC60065 and IEC60950. The model RK2671 series hipot testers are 0 to 10KV output, the leakage current ranges have 0~20mA, 0~50mA and 0~100mA

1. Introduction Test lampholders is designed according to IEC60360 and GB24392. It is consisting of a metallic sleeve fitted with a thermocouple. A thermocoule shall be permanently attached to the lampholder sleeve, a spring wire shall be used around the outside of the sleeve. The test lampholder sleeve is made by nickel with content of 99% min, and the vickers hardness shall be 1350. It is applied to

IEC60335-1 Electrical Safety Testing Machine Temperature Rising Test Corner 1. Introduction Test corner is designed according to IEC60335-1 chapter 11 “heating”. It is applied to provide a standard required conditions for temperature rising test of electric appliance. The dimension and temperature measurement arrangement of test corner can be customized according to the sample under test. 2. Specification Dimension 1000*1000*1000mm (L*W*H, other size is customizable),