Test Finger Probe

IEC60065 Test Probe Kits (Includes Test Probes B / C/ D, Test Probes 18/ 19/ 13, Test Hook) 1. Introduction The test probe kits are meet the requirement of IEC60065, includes jointed test finger, small finger probes, test pin, rigid test finger, test wire, test rod and test hook, they are applied to test the person’s protection from live parts and hazardous parts of audio, video and similar electronic apparatus. 2. Parameter Name Figure number Description Jointed test finger

IEC60950 Test Probe Kit Contains Jointed Finger Probe Rigid Test Finger Ball Pressure Test Apparatus ect. The PG-60950 contains the devices listed in the core of the UL / IEC / EN 60950 requirements. It includes the following probes: 1. Jointed Finger Probe Diameter of finger: 12mm Length of finger: 80mm Diameter of baffle: 50mm Length of baffle: 100mm Thruster (optional) 10N Material: Insulating material (baffle and handle), stainless steel(finger) 2. 50mm Impact Test Ball 2

IEC60335 Surface Temperature Probe with 4N Force for Satety Testing 1. Standard of Surface Temperature Probe: IEC60335 2.Application of Surface Temperature Probe: The surface temperature probe is designed according to the requirements of the IEC60335 standard. It’s mainly used to test the temperature rise of the front and side of the cooker and oven. 3.Parameters: Copper Sheet Diameter 5mm, thickness 0.5mm Thermocouple 0.3mm diameter, American OMEGA K type Insulated Pipe

Articulate Probe with Web Stop / UL Articulated Finger Probe for Accessibility Test / Jointed Test Probe 1. Standard Conforms to: UL858 figure 6.1, IEC62368-1 figure V.1, UL507 figure 6.5 (PA100A), UL1017 figure 2, UL1062 figure 1.2, UL1310 figure 14.2, UL982 figure 7.1, UL474 figure 5.1, UL6500 figure 14, UL60065 figure 14, UL1082 figure 7.2 and UL1278 figure 8.3. 2. Description: Articulate probe with web stop is designed according to IEC623680-1 figure V.1, meet the

IEC61032 Test Finger Probe Test Probe B Jointed Test Finger 10N Force 1. Introduction of Test Probe B: The test probe is is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. The jointed test finger is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with finger. 2. Specification Jointed Test Finger: Diameter of dactylogryposis: 12mm Length of

IEC60529 Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Test Rod meets IEC and EN Standards including IEC 60529 and IP3 and suffix C codes. The handle and stop face are made of delrin and the rod is made of stainless steel. The rod can be customed with 3N thruster. Specification: Length of

UL507 PA100A Test finger Articulate Probe with Web Stop for Blade Fan with Third-Lab Certificate 1. Description: Articulate probe with web stop is designed according to IEC62368 figure V.1, meet the requirements of UL507 figure 6.5 (PA100A), UL1017 figure 2, UL1062 figure 1.2, UL1310 figure 14.2, UL982 figure 7.1, UL474 figure 5.1, UL6500 figure 14, UL60065 figure 14, UL1082 figure 7.2 and UL1278 figure 8.3. Palm simulator and restricted joint movement simulates human finger

Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1, GB2099.1, IEC61032, UL standard. Parameters: 1). Finger diameter: 12mm 2). Finger length: 100mm 3). Stop face diameter: 125mm 4). Standard: IEC60335-2-14 Remark: The test probe is identical to test probe B of IEC61032 except that the diameter off a circular stop face is 125mm and a distance between the tip of the test finger

Calibrated IEC60335 / IEC61032 / IEC60950 Test Finger Probe and Short Test Pin Probe The test finger probe and short test pin probe are designed according to IEC61032 standard. The test finger probe is made of steel finger, baffle and insulated handle. The test finger probe is used to verify the basic protection against access to hazardous parts and also be used to verify the protection against access with finger. The pin is intended to verify the protection against access to

UL507 PA135A Accessibility Test Probe for Uninsulated Live Part Nylon Handle + Stainless Steel Finger 1. Description: UL accessiliby test probe for uninsulated live part is designed according to UL507 figure 9.1 (PA135A) and UL1278 figure 8.1 (PA130A). The handle is made by nylon and tip is made by stainless steel. 2.Specification: Rigid finger length 101.6mm (4 inch) Rigid finger diameter Φ12.7mm (1/2 inch) Head length 14.3mm (9/16 inch) Head radius R4.8mm (3/16 inch) Tail

IEC60529 1.0mm Test Wire used for IP4 Code Test with Calibrated Certificate Introduction: Used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Meets IEC and EN Standards including IEC 60529 for IP4 and suffix D codes. The handle and stop face are made of Delrin®. The rod is made of stainless steel. Specification: Length of test wire: 100mm Diameter of test wire: 1mm Diameter of stop sphere:

IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure 14, this probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Specification: diameter of probe 25mm Length of probe 80mm Diameter of front baffle 60mm Diameter of bottom baffle 110mm Total length of probe and baffle 150mm Material nylon

IEC60335-2-11 Surface Temperature Measuring Probe for Tumble Dryers 1. Introduction The probe for measuring surface temperature is designed according to the requirement of IEC60335-2-11 figure 101 and IEC6335-2-6. It’s mainly used to test the temperature rise of the front and side of the cooker, oven and tumble dryers, 4N force is applied according to the standard. 2. Parameters Copper Sheet Φ5mm*0.5mm (thickness) Thermocouple Φ0.3mm, K type made by OMEGA Insulated Pipe

IEC61032 Test Finger Probe 1 Diameter 50mm Steel Ball with CNAS Certificate Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is intended to verify the degree of protection of enclosures against ingress of solid foreign objects have a diameter of 50mm or greater. Specification: 1) Diameter of sphere: 50mm+0.05 2) Weight of the sphere:500g 3) Material: steel Picture:

IEC61032 Test Finger Probe Test Probe A 50mm Sphere with Handle Introduction: Designed according to IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand. Specification: Diameter of test sphere: 50mm Diameter of baffle: 50mm Thickness of baffle: 4mm Diameter of

UL Finger Probe (Articulate Probe with Web Stop) 1. Description of Articulate Probe with Web Stop: Articulate probe with web stop is designed according to IEC62368 figure V.1, meet the requirements of UL507 figure 6.5 (PA100A), UL1017 figure 2, UL1062 figure 1.2, UL1310 figure 14.2, UL982 figure 7.1, UL474 figure 5.1, UL6500 figure 14, UL60065 figure 14, UL1082 figure 7.2 and UL1278 figure 8.3. Palm simulator and restricted joint movement simulates human finger movement. It’s

Small Child Finger Probes / IEC61032 Test Probe 18 and 19 Made by Metal and Nylon 1. Test probe 181). IntroductionTest probe 18 ( Child small finger probe ) is designed according to IEC61032 figure 12, this probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. 2). SpecificationDiameter of probe8.6mmSemi-diameter probe4.3mmLength probe57.9mmDiameter of first handle38.4mmLength of first handle101.6mmDiameter of second

Test Probe 18 Small Finger Probe 36 months to 14 years Child Finger Probe Introduction of Small Chlid Finger Probe: It is designed according to IEC61032 figure 12, this probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Specification of Small Child Finger Probe: Diameter of probe 8.6mm Semi-diameter probe 4.3mm Length probe 57.9mm Diameter of first handle 38.4mm Length of first handle 101.6mm Diameter of second

IEC 60065 High Prescion Telecom Test Probe with CNAS Calibration Certificate Standards This telecom test probe is designed according to the standard of IEC60950, IEC60065, IEC60695. Application It is used to check for limited access to telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfied basic standard for telecom product safety. Technical parameter Test probe diameter 12mm Test probe length 80mm Dam-board diameter 50mm Material nylon and

IEC61032 Standard Test Finger Probe and Unjointed Test Finger in Stock Can Be with Thruster The standard test finger probe and unjointed test finger are designed according to IEC61032 standard. The standard test finger probe is intended to verify the basic protection against access to hazardous parts and also be used to verify the protection against access with finger. The Unjointed test finger probe may be used to verify the protection of persons against access to hazardous