Electrical Safety Test Equipment

IEC61010-1 Clause 7.4 Electrical Safety Testing Circular Stability Testing Machine This motor-driven inclined plane stability tester is engineered to evaluate product stability according to international safety standards. Designed for testing large products such as televisions and household appliances, it features innovative cup-type casters for easy mobility and precise angle adjustment. Compliance Standards Manufactured in accordance with multiple international safety

Inclined Plane 0-30° Tilted for Verifying the Stability of Electrical Appliance Compliant to IEC60335-1 Introduction The inclined plane is designed to simulate tilted desktop scenarios in normal use conditions, assessing the stability performance of household and similar electrical appliances used on tables or floors. This stability test meets the requirements of: IEC60335-1 clause 20.1 IEC60065 clause 19.1 IEC60950 clause 4.1.1 The inclined plane consists of a surface and

Apparatus for Sandpaper Abrasion Test as Per ISO6722-1 for Testing Auto Cable 1. Standard conforms to ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE J1127, SAE J1128 and JIS C3406 standard. 2. Application The abrasion test is only applicable to cables with a conductor size≤6mm²,and it is intended to verify that the sistance of the cable insulation to abarsion mees the customer requirements. A test sample of 1m in length and remove 25mm of

0.2 Grade Digital Power Meter with Bandwidth 0.5Hz to 1000KHz and Harmonic Testing Function This multifunctional digital power meter measures power for single-phase (1P/2W) AC and DC power supplies with a test frequency range from DC 0.5Hz to 100kHz. Featuring a 5" IPS LCD display with 5-digit measurement capability, it provides high-precision measurements and simultaneous multi-parameter monitoring. Key Features: Waveform display for voltage, current, and power Integral

Cold Bend Test Apparatus for Testing the Cable Insulation at Low Temperature Compliant to IEC60811 Introduction The cold bend test apparatus is designed according to IEC60811-504, IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94 standards for conducting bending tests at low temperatures on cable insulation. This apparatus is suitable for: Cores of circular cross-section with external diameter up to 12.5mm Sector-shaped cores when dumb-bell

99% Purity Nickel Sleeves for Testing the Temperature Rising of Lampholders E14, E26, E27, B22, E12 Compliant to IEC60360 Introduction These nickel sleeves are precision-engineered in strict compliance with IEC60360 standards for testing temperature rise in incandescent lamp holders. Manufactured from nickel with a minimum purity of 99% and a Vickers hardness of 135°, each sleeve features a permanently attached thermocouple and an external spring wire. Specifications

Digital Electrical Parameter Measuring Instrument Model HP-510 - Multifunctional Power Meter for Voltage, Current, Power Factor, Frequency and Harmonics Testing Product Overview The HP-510 is a high-precision digital power meter designed for measuring single-phase (1P/2W) AC and DC power supplies. Featuring a 5" IPS LCD display with 5-digit measurement resolution, this instrument provides simultaneous measurement of multiple electrical parameters with exceptional accuracy.

Impact Vessel with 1.8KG Loaded for Testing Hob Surface Product Overview The impact vessel is designed to meet the test requirements of IEC60335-2-6 clause 21.102 and IEC60335-2-9 clause 20.101, verifying the ability of hob surfaces to withstand mechanical stresses. The vessel is dropped flat 10 times from a height of 150mm onto the cooking zone, with requirements that the hob surface remains uncracked and maintains electrical integrity. Key Features Constructed from durable

Standard Test Vessels for Determination of CO/CO₂ Ratio of Gas Burner Compliant with AS/NZS 5263.0 Introduction These standard test vessels are designed in compliance with AS/NZS 5263.0 Figure A12 for determining the CO/CO₂ ratio and NO₂ emission rate of gas burners. Each vessel includes a lid, stirrer, and thermocouple well designed according to AS/NZS 5263.1.1 Figure AA.104. Constructed from commercial quality aluminum, the vessels feature a thermocouple fixed with a

Standard Pan with Lid for Testing Energy Efficiency and Energy Efficiency Grade of Induction Cookers Compliant to GB21456 Introduction The standard pan with lid is designed according to GB21456 Annex A for testing the energy efficiency and energy efficiency grade of household induction cookers. The pan and lid are constructed from Q235 steel with a maximum carbon content of 0.08%. The surface of both pan and lid is smooth and polished to prevent rust. The lid thickness is 1mm

IEC60350-2 Standardized Cookwares for Evaluating the Energy Consumption of Electrical Hobs Introduction The standardized cookware is designed according to IEC60350-2 and EN60350-2 standards for evaluating the energy consumption of electrical hobs intended for household use. The side wall of the vessel is made of 1.4301 stainless steel (AISI 304) with thickness 1mm±0.05mm, while the bottom is made of 1.4016 stainless steel (AISI430) with thickness 6mm±0.05mm. The cookware is

PLC Type IEC60112 Flammability Testing Tracking Index Test Apparatus Introduction The tracking index test apparatus is designed according to multiple international standards including IEC 60112, GB/T 4207, and various clauses from IEC62368-1, IEC60598-1, IEC60601-1, IEC60335-1, IEC61010-1, IEC60884-1, and BS1363-1. This equipment is essential for material testing across various electrical products such as lamps, household appliances, IT/AV equipment, and electrical accessorie

Anti-siphon Testing Machine for Hose-Sets IEC61770 The Anti-siphon testing machine is designed to verify the backsiphonage performance of hose-sets for household and similar purpose appliances according to IEC60335-1 clause 22.48 and IEC61770 annex A standards. It tests equipment under negative pressure conditions to ensure proper check valve functionality. Key Features Simulates negative pressure of 65±15 kPa for 5 seconds Verifies leakage or backflow in check valve

Cable Static Flexibility Test Apparatus IEC60227-2 The static flexibility test apparatus is designed to meet the test requirements of IEC60227-2 clause 3.5 and GB/T5023.2 clause 3.5 for testing the flexibility of cables with conductor cross-sectional areas ≥2.5mm². Technical Parameters Specification Value Working Power AC220V/50Hz Control units Meter+buttons Height from ground 1.5m above Clamp A Fixed end Clamp B Moveable end Move direction horizontal Moveable distance ≤1.0m

Static Wind-Force Test Apparatus IEC60598-2-3 for Testing Lighting Fixture The static wind-force test apparatus is designed to meet the test requirements of IEC60598-2-3:2011 clause 3.6.3.1 & figure 1 and IEC60598-2-5 clause 5.6.5. This equipment simulates outdoor conditions for streetlights or floodlights installed at heights by applying static loads, torque, or weight to evaluate the load-bearing capacity and stability of lighting fixtures under specified wind forces and

Static Wind-Force Test Apparatus IEC60598-2-3 for Testing Lighting Fixture Introduction The static wind-force test apparatus is designed to meet the test requirements of IEC60598-2-3:2011 clause 3.6.3.1 & figure 1 and IEC60598-2-5 clause 5.6.5. This equipment simulates outdoor conditions for streetlights or floodlights installed at heights by applying static loads, torque, or weight to evaluate the load-bearing capacity and stability of lighting fixtures under specified wind

Plug Gripping Test Apparatus IEC 60884-1 Annex C Product Specifications Attribute Value Normative standard IEC60884-1:2013 annex C Force range 0-200N Reference plug Stainless steel/1pc Application For testing plug Test Apparatus for Plug Gripping Test This test apparatus is designed to meet the requirements of IEC60884-1:2013 annex C for plug gripping tests. The system includes a force gauge with secure attachment mechanisms for both the reference plug and test plug. Key

Ball Drop Tester with a Steel Ball Product Specifications Attribute Value Material of the ball Steel Mass of the ball 500g (customize-able) Drop height 1.3m~2.1m (customize-able) Working power 220V/50Hz Ball Impact Test Device Introduction The ball impact test device meets the requirements of multiple international standards including IEC60598-1 clause 4.13.4 test a), IEC60950-1 clause 4.2.5, AS-NZS61439.4 clause 10.2.6.2, and IEC60601-1 clause 15.3.3. This precision

Current-Carrying Hose Crushing Test Apparatus IEC60335-2-2 Product Attributes Normative standard IEC60335-2-2 clause 21.101 Application for verifying current-carrying hoses resistance to crushing Crushing pressure 1.5KN max. Pressurization speed 50mm/min±5mm/min Control mode PLC+touch screen Working power AC220V/50Hz Product Description The current-carrying hose test apparatus is designed to meet the test requirements of IEC60335-2-2 clause 21.101, for verifying the current

Current-Carrying Hoses Torsion Test Apparatus for Torsion Resistance Testing with Electrical Safety Test Equipment Product Attributes Attribute Value Normative standard IEC60335-2-2 clause 21.104 Application For verifying current-carrying hoses resistance to torsion Torque speed 10r/min Test cycle 2000 Control mode PLC+touch screen Working power AC220V/50Hz Product Description The current-carrying hoses torsion test apparatus is designed to meet the test requirements of