Environment Test Equipment

IEC60529 IPX5 IPX6 Handheld Stainless Steel Jet Nozzles with Pressure Gauge Inturoduction: Jet Nozzle is designed according to the requirements of IPX5 and IPX6 code of GB4208 and IEC60529 standard. It’s used to test the waterproof performance of the appliance and electronics. Parameters: Item IPX5 IPX6 Nozzle Hole Diameter 6.3mm 12.5mm Water Discharge 12.5L±0.625L/min 100±5L/min Nozzle distance between shell 2.5-3m Test Time More than 1min/m2 and 3mins Pressure Gauge 0~0

Water Resistance Comprehensive Test Chamber for IPX3/4 Test as Per IEC60529 and R1/R2 S1/S2 Test as Per JIS D0203 1. Introduction The waterproof test chamber is designed to meet the test requirements of JIS D0203 for R1/R2/S1/S2 tests and IEC60529 for IPX3/IPX4/4K tests. The rotating tube with 2 rain nozzles for R1/ R2 rain tests, the rotating tube with 40 spray nozzles for S1/S2 spray tests, both are strictly designed according to JISD0203. The oscillating tube for IPX3/4

Strong Water Jets Test Chamber for IPX5 and IPX6 Testing Conform to IEC60529 1.Introduction The IPX5 and IPX6 tests are made by spraying the enclosure from all practicable directions with a stream of water from standard test nozzles, the test nozzles (hose nozzles) with Φ6.3mm and Φ12.5mm diameter are strictly designed according to IEC60529 figure 6, and the test chamber can completely meet the test requirement of IEC60529:1989 +A1:1999 +A2:2013 clauses 14.2.5 and 14.2.6.

15 Degree Tilted Vertical Rain drip Box Testing Equipment for IPX2 Testing 1. Introduction The IPX2 waterproof testing equipment request Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes (2.5min in each of 4 fixed positions of tilt). Water equivalent to 3 mm/minute. The IPX1 waterproof testing equipment request the dripping water (vertically falling drops) shall have no

High Pressure Jetproof Thermal Test Chamber IEC60529 ISO20653 For IPX5 IPX6 IPX9K Product Overview IEC60529 / ISO20653 High Temperature High Pressure Jetproof Test Chamber for IPX5 IPX6 IPX9K The IPX69K high temperature and high pressure jet spray test chamber is designed according to IEC60529, DIN40050-9 figure 7 and ISO20653 figure 8 and 9 standards. This equipment performs IPX5, IPX6, IPX6K and IPX9K testing with user-defined parameters via a 7-inch LCD touch screen and

IPX8 High Pressure Water Tank 1. Introduction IPX8 high pressure water tank is designed according to IEC60529-2001 regarding the second characteristic numerals 8 for continuous immersion test. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect.

8000L Step-In Dust Chamber as per IEC60068-2-68 method La2 Constant Air Pressure 1. Introduction The step-in dust chamber is designed according to IEC60529 for IP5X&IP6X tests and IEC60068-2-68 method La2 (constant air pressure), the object of this test is to determine the degree of protection against ingress of fine dust into electrotechnical products, like outdoor luminaire, household appliance, auto parts and other similar electrical products. This is a dust tightness test

IEC60068-2-3 Compliant Temperature Impact Test Chamber with TEMI880N Controller The PG-TSC three-box thermal shock chamber is engineered specifically for evaluating material performance under rapid temperature transitions. This environmental test equipment operates across a -40℃ to +120℃ temperature cycling range, utilizing a dual-chamber architecture that separates high and low temperature zones from the test space. Technical Specifications Parameter Specification Temperatur

Open-Type IPX1 and IPX2 Water Resistance Testing Equipment The IPX1-2 Vertical Rain Drip Box Waterproof Testing Equipment is engineered in compliance with IEC60529 clause 14.2.1 and 14.2.2 standards. This equipment simulates vertical dripping and 15-degree tilted dripping conditions to verify whether electronic products, luminaires, electric components, auto parts, and other devices meet waterproof protection requirements. This open-type testing equipment offers flexible

IPX9K High Pressure and Temperature Water Ingress Protection Test Chamber ISO20653 compliant test chamber designed for automotive parts protection testing against high-pressure, high-temperature water jets. Product Overview The IPX9K test chamber provides the most stringent ingress protection testing for automotive components outside passenger compartments. Compliant with ISO20653 and DIN40050-9 standards, this equipment verifies protection against high-pressure steam jet

IEC61010-1 Clause 6.8.2 Climate Chamber Programmable Constant High Temperature and Humidity Test Chamber The programmable constant temperature and humidity test chamber provides comprehensive environmental testing capabilities including constant high and low temperature humidity, and alternating high and low temperature humidity conditions. This advanced testing equipment incorporates multiple integrated systems including refrigeration, heating, humidification/dehumidificatio

IEC60529 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester The IPX34 spray nozzle waterproof tester is engineered for comprehensive ingress protection testing according to international standards, ensuring reliable performance for electrical and electronic products exposed to rain and water spray conditions. Product Overview Designed and manufactured in compliance with IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5, this testing equipment is essential

IEC61010-1 Clause 6.8.2 Climate Chamber Programmable Constant High Temperature and Humidity Test Chamber 1. Introduction The programmable constant temperature and humidity test chamber is used to provide test environments such as constant high and low temperature humidity, alternating high and low temperature humidity, etc.. It includes refrigeration system, heating system, humidification/dehumidification/water circulation system, air duct circulation system, electrical

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester 1. Introduction The ipx34 spray nozzle waterproof tester is designed and manufactured according to IEC60529 clause 14.2.3 and clause 14.2.45 figure 5 , IEC60598-1, GB4208, GB7000.1, GB17761 standards. It is suitable for waterproof testing of outdoor electrical and electronic products in terms of rain and water spray, and for waterproof testing of products

IEC60529 Spray Nozzle Testing Equipment for IPX3 and IPX4 Testing 1. Introduction IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. The equipment is consisted by spray nozzle, water tank and control box. This equipment is to simulate the raining conditions to check the physical performance of

Splash Water Oscillating Tube Testing Equipment for IPX4 Testing 1. Introduction Oscillating tube is designed according to IEC60529 figure4, clause 14.2.3 and 14.2.4, it is applied to verify protection against spraying (IPX3) and splashing water (IPX4), and widely used in the industries of electronics, luminaire, electric components, auto parts and etc.. The IPX3 and IPX4 waterproof test equipment is consisted by oscillating tubes (R200 to R1600), turntable,water tank,

Water Spray Test Apparatus with Three Spray Head Mounted in a Water Supply Pipe Rack 1. Introduction The UL water spray test equipment is designed according to UL60507-ENGL 1999 figures 38.1 and 38.2, ANSI Z21.10.3-2004, ANSIZ21.58 figure10/11 and CSA4.3-2004, IEC62368-1 annex Y.5.3/ figure Y.2, meets the requirement of UL498, UL1598, UL153, UL154B, UL103, UL8750, UL1741, UL514B, UL1278, UL1571 and etc. The water spray test apparatus is to consisted of three spray heads

ISO 16750-4 Ice Water Shock Test Chamber for Testing the System or Component of Road Vehicle 1. IntroductionThe ice water shock test chamber is designed to meet the test requirements of ISO16750-4 clause 5.4.2 and clause 5.4.3. The equipment can perform splash water test and submersion test separately. For splash water test, The DUT is placed on the heating chamber (RT +10℃~150℃), and heat it at Tmax for 1 hour (or until DUT temperature stabilization is reached), then use a

IEC60695-10-2 Ball Pressure Test Apparatus Made by Stainless Steel 1. Introduction The ball pressure tester is an instrument designed to test the heat resistance of household plugs and sockets. It is designed and manufactured according to the requirements of IEC60695-10-2, and it's required by the many standard requirements such as IEC 62196-1 clause 29.3, IEC60335, IEC60601, GB4706.1 and etc. It can simulate pulling out the plug and plugging it back in, applying pressure,

IEC60068-2-31 Repeated Free Fall 500mm /1000mm Rotating Barrel for Mechanical Strength Test 1. Introduction The rotating barrel also called as tumbling barrel is designed according to IEC60068-2-31clause 5.3/figure A.1, IEC60598-1 clause 4.13.5, IEC60884-1 clause 24.2 for repeat free fall test. The test is to check the mechanical strength of the electrical appliance like plugs and socket-outlets, the sample shall be placed in the tumbling barrel and subjected to prescribed