PEX Pipe Extrusion Line

Under floor heating Al-PEX pipeline The PEX-AL-PEX pipe is a composite pipe made of Aluminum pipe and PEX pipe, and the aluminum layer pressed between inner and outer layer of pipes. It combines the strength of metal with the durability of plastic. We, Weifang KAIDE plastics machinery Co.,ltd(https://www.facebook.com/jiang.forina.5), is using ultrasonic overlap welding method to produce this pipe. It can withstand temperature up to 95℃,and a working pressure of 1.25MPa, thus

Oxygen Barrier PE-Xb tubing making machine What is Oxygen-barrier pipes? In today’s home decoration, many customers will choose to equip Oxygen-barrier floor heating pipes in their new house. Floor heating system is much advanced in uniform heat dissipation and home design field. But many friends haven’t heard of the Oxygen-barrier floor heating pipes till now. So here, we’d like to share some basic application and advantages of this EVOH(Oxygen-barrier) pipe. Why we need

Ultrasonic Overlap Welding PEX Alumnium Plastic Composite Pipe Production Line KAIDE factory was established in 2001. But actually, we started to produce Aluminum pipe production line from 1998. What's more, our founder, Mr Zhang has been in this industry for over 30 years. He was started in this field from his 20+ years old. According to different raw materials, AL-plastic pipe lines including PEX-AL-PEX, PERT-AL-PERT, PPR-AL-PEX, PE-AL-PE. PEX-AL-PEX pipes are more popular

Under floor heating ALPEX pipeline ALPEX is a 5 layers composite pipe. Its structure is not only combined the most favorable performance of metal and plastics, but also avoid the disadvantages of them. We, Weifang KAIDE plastics machinery Co.,ltd (https://www.linkedin.com/in/forina-jiang-5a91b3137/), is using ultrasonic overlap welding method to produce this pipe. It can withstand temperature up to 95℃,and a working pressure of 1.25MPa, thus meeting design requirements for

Cross-linking PEXa Pipe Making Machine PEXa EVOH Oxygen Barrier Pipe Co-extrusion Machine Peroxide Cross linking PEXa Pipe Making Machine/ Ram Extruder for PEXa Peroxide crosslinking pipe making KAIDE PEX-a pipe is produced by the peroxide (Engel ) method. This method performs "hot" cross-linking, above the crystal melting point. The pex tubing industry consider this tubing superior because the crosslinking is done during the manfuacturing process when polyethylene is in this

Peroxide Cross-linking PE-Xa Pipe Production Line Cross-linking PEXa Pipe Making Machine PE-X pipes are made of HDPE and cross linking accessories. According to the difference of techniques, it has four types, PE-Xa, PE-Xb, PE-Xc and PE-Xd. Our company provide PE-Xa and PE-Xb pipe production line. Below are general information about PEXa pipe making machine Technical Date of Pipe Production Line: Line Model Production Scope Production Speed Nominal Power L×W×H KDXA-40 Ф16

Three Layer HDPE Pipe Production Line 20-110mm Multi-layer PE Irrigation Pipe Production Line This line is designed to produce three layer HDPE irrigation pipe from 20-110mm with recycled material in the middle, to reduce that production cost. Inner & outer thickness is 15% each, and middle 70%. Die head can also designed as per your requirements. Technical Data: Line Model Extruder Pipe Size Pipe Structure Line Output/Speed FHPE-110 SJ-60+SJ-65 20-110mm 3 layer co-extrusion

Microduct Bundles Production Machine Line Model Screw Diameter L/D Production Speed Nominal Power L×W×H KDJS-60 Ф60mm 36:1 30m/min 109KW 38×4.5×2.5 KDJS-65 Ф65mm 33:1 20m/min 76KW 38×4.5×2.5 Cross Designed Die Head Moulds Based on many years’ researches of various composite co-extrusion pipe machines, the bundle die head mould of Microduct Bundles Production Machine has the advantages of reasonable structure, convenient operation, better coating result, etc. The duct number

HDPE Silicon Core Microduct Pipe Tube Hose Multiduct Extrusion Line Making Machine Plant Production As a new casing pipe for the protection of light and electric cable, HDPE silicon core pipes are characterized by corrosion-resistance, agereistor little friction coefficient of inner wall,good insulativity,and can be fixed very soon. It has been used in Europe for more than 10 years,and also has been initially used in China. It can be widely used for the protection of light

HDPE Microduct Production Line Microduct Making Machine Microducts are small ducts for the installation of small microduct fibre optic cables. They have a size ranging from typically 7-14mm or up to 20mm. And those micro-ducts are installed as bundles in larger ducts, like 2 ways, 4 ways and 7 ways. Below pipe extrusion line is to make those microduct at high speed 60m/min. Main Technical Parameters: Line Model Screw Diameter L/D Micro-duct Size Production Speed KDGX-60 Ф60mm

Link Duct for sheeting Optical Fibre cables There are many types of Microduct Bundles according to different Optical Fibres differnt laying environment. Link Duct is suitable for Micro-trenching ground, which requiring for a narrow digging width. Normally are using in the city hard ground. → SJ60/36 Extruder → Flat Duct Die H → Cooling Flume → Haul-off Machine → Winding Machine Model Screw Diameter L/D Production Speed Line Length Nominal Power KDGX-60 60mm 36:01:00 10-15m

Optical Fiber PE Micro Duct Producton Machine Communication Cable PE Duct Making Machine This Pipe machine is use to produce two layers duct PE pipe,called HDPE Micro-ducts, this kind of pipe is used in Telecommunication fields. Micro-ducts are the small, flexible, lightweight tube for the installation of fiber optical cables. Generally there are three different speed model for your choice; 20m/min with lower investment cost, 40m/min and 60m/min speed model with higher

High Speed Silicon Cross-linking PEXb pipe production line High speed silicon cross-linking PEX-b pipe making machine is one of our main product. KAIDE factory is specialized in manufacturing Multi-layers Composite and High Speed pipe production line from 2001. Started to produce PPR glass fibre pipe machinery is from 2003. After so many years accumulation, we had gained 1000 more sets producing perience. Customers are mainly from Ruassian Language countries like Russia,

PERT Heating Pipe Extrusion Line/PERT Pipe Extruder Machine There are mainly three different speed models for PERT pipe extrusion lines, 15m/min speed model, 35m/min speed model and highest speed 60m/min model with fully auto winding machine and package device. Beow are introduce of 60m/min speed model. Technical Data of Pipe Production Line Line Model Screw Diameter L/D Production Scope Production Speed Nominal Power L×W×H KDRT-75 ф75mm 36:1 ф16-32mm 60m/min 163KW 58m×2.5m

High Speed Silanes Cross-linking PE-Xb Pipe Production Line PEX Pipe Extrusion Line PEX pipes are made of HDPE and cross linking accessories. According to the difference of techniques, it has four types, PEXa, PEXb, PEXc and PEXd. Our company provide PEXa and PEXb pipe production line. We have focused on plastic pipe extrusion technology for more than 20 years, with advanced technology and high quality. Technical Data of Pipe Production Line: Line Model Screw Diameter L/D

Air Blowing Optical Fiber Cable Duct Bundle Making Machine Cable Duct Bundle Production Line This pipe machine is used to produce the new type communication pipe, called tube bundle. The tube bundle is made by one micro-duct or more than one micro-ducts grouped according to a certain arrangement order with outer sheathing layer. It can hold more conduits in the limited space. Main Technical Parameters: Line Model Screw Diameter L/D Bundle Type Production Speed KDJS-60 Ф60mm

PE Silicon Core Micro-duct Producton Line Communication Cable Duct Making Machine This Pipe machine is use to produce two layers duct PE pipe,called HDPE Micro-ducts, this kind of pipe is used in Telecommunication fields. Micro-ducts are the small, flexible, lightweight tube for the installation of fiber optical cables. Production Speed can be up to 60-80m/min. Main Technical Parameters: Line Model Screw Diameter L/D Micro-duct Size Production Speed KDGX-75 Ф75mm/50mm 36/30:1

Polyethylene HDPE Pipe Making Machine 110mm-315mm HDPE Pipe Production Line KAIDE factory has focused on plastic pipe extrusion technology for more than 20 years, especially for high speed pipe line and multi-layer pipe line. For small diameter HDPE pipe from 20mm-63mm, the production speed can reach to 50-60m/min, in order to increase the production efficiency, reduce production cost, such as labor, electric and water consumption etc. Below are introduce for HDPE pipe

Polyethylene HDPE Pipe Extrsion Machine HDPE Pipe Production Line KAIDE factory has focused on plastic pipe extrusion technology for more than 20 years, especially for high speed pipe line and multi-layer pipe line. For small diameter HDPE pipe from 20mm-63mm, the production speed can reach to 50-60m/min, in order to increase the production efficiency, reduce production cost, such as labor, electric and water consumption etc. Below are introduce for HDPE pipe production line,

Three Co-extrusion HDPE Pipe Production Machine Multilayer HDPE Pipe Extrusion Machine Below pipe production line is to produce 3 layer type HDPE pipes, with diameter range from 20mm up to 110mm. Production speed is 30m/min for pipe size 20×2.0mm. Techncial Data: Line Model Extruder Pipe Size Pipe Structure Line Output/Speed FHPE-110 SJ-60+SJ-65 20-110mm 3 layer co-extrusion 30m/min; 350kgs/h Features of Pipe Production Line: Extruder High efficient wear-resisting extruder