Redress Kit

SHQN Valve and Wireline Rubber Seal Kits with Equipment Identification Valve Seal and Tool Kits: Specify the Equipment Configuration For the listed 1-inch, 2-inch or 3-inch plug valve seal enquiries, identify the valve manufacturer and model and provide the seal drawing. Confirm the Y-type profile, compound, hardness and any brass or stainless-steel backing for the actual part. For setting-tool or Shorty redress kits, provide the tool model and revision separately and list

Custom Rubber Seal Kits for Wireline Adapters — Specify Hardness and Packing Labels Custom Adapter Seal Kits: Turn the Parts List into an Approved Packing Schedule For a custom wireline adapter kit, send the tool model and a line-by-line parts list. Confirm how many pieces are required per kit and which items need separate identification. This helps keep similar O-rings and different hardness grades associated with the correct assembly position. Custom-kit detail Ordering

Wireline O-Ring and Redress Kits with Specified Hardness and Custom Labels Wireline Kit Labels: Identify Compound and Hardness by Part Number A custom label helps identify the intended replacement kit when several tool versions or hardness grades are handled together. Keep the label information linked to the approved component schedule, rather than selecting seals only by colour or kit photograph. Label or order field Specification Tool identity Manufacturer, model, tool size

Custom Labeling and Specified Hardness 2" Fig 1502 Swivel Joint Rubber Seal Repair Kit 2-inch Fig 1502 Swivel Joint Seal Kit: Ordering Information This listing is for a rubber seal repair kit enquiry. Confirm the joint identification and exact seal dimensions; the figure designation alone does not establish interchangeability or certify the repaired assembly. Supply the fluid, operating temperature, continuous and peak pressure, and any sour-service requirements. The listed

Wireline Adapter Rubber Seal Kits - DWS 3 5/8 Compact and T Set Enquiries Match the kit to the tool reference Shanghai Qinuo offers rubber seal kit enquiries for wireline tool maintenance. Specify whether the required equipment is DWS 3 5/8 Compact or T Set, together with its manufacturer, revision and kit part number. These references should be matched separately; no interchangeability is assumed. Specify hardness and compound grade for every O-ring position. Temperature and

2-Inch Figure 1502 Best-Style Swivel Joint Repair Kit 2-Inch Figure 1502 Swivel Joint Kit: Confirm the Style and Parts List This kit enquiry uses the existing 2-inch Figure 1502 Best-style reference. Confirm the actual joint manufacturer, model/style and parts drawing before ordering. Nominal size and Figure alone do not establish interchangeability with another swivel joint. Kit detail Required reference Joint fit Manufacturer, exact style/model, nominal size and drawing

3-Inch Figure 1502 Narrow-Style Swivel Joint Repair Kit 3-Inch Figure 1502 Narrow-Style Kit: Confirm Seal Geometry and Packing Labels This enquiry covers replacement parts for the stated 3-inch Figure 1502 narrow-style swivel joint reference. Confirm the manufacturer, exact style and drawing revision; nominal connection size does not define individual seal dimensions. Order information Details to provide Equipment identity Manufacturer, narrow-style reference, Figure 1502 and

Wireline Adapter Seal Kits for #10, #20, Compact and Shorty Tool Enquiries Setting Tool and Shorty Redress Kits: Ordering Checklist The #10, #20, compact setting-tool and 3-1/2-inch Shorty kit references identify separate tool enquiries. Confirm the manufacturer and revision for each; do not use a shared size reference alone to approve a complete kit. List each O ring size, compound, hardness and quantity, plus any specified backup or non-rubber parts. Where a burst or

SHQN AS568 O Ring Seal Kits with Specified Hardness AS568 Seal Kit: Size, Compound and Hardness Requirements List the AS568 size and quantity for each O ring in the kit. Identify any backup rings or other components separately and confirm the tool model and revision against the agreed bill of materials. Hardness is specified for the selected compound and does not establish a seal pressure rating. For the 90 Shore A option named in this listing, confirm the compound designatio

NBR Shorty Wireline Seal Kits with Specified Hardness and Identification Shorty Wireline Kit: NBR Seal and Packing Requirements Confirm the actual Shorty tool model and revision, including the 3-1/2-inch configuration where applicable. List each O ring size and quantity from the corresponding drawing rather than treating the tool designation as an individual seal dimension. For an 80 Shore A NBR enquiry, specify the compound designation and hardness tolerance. Provide fluid

SHQN AS568 Wireline O Ring Kits with Compound and Color Identification 90 Shore A AS568 Kit: Compound and Color Identification List the AS568 size and quantity for each ring, together with its compound designation and hardness tolerance. Identify backup rings or other components separately and confirm the tool model and revision against the component drawing. Black, orange, green or a custom color can be requested for identification, with sample approval where needed. Color

SHQN AS568 Oilfield O Ring Kits for Specified Equipment Oilfield Seal Kits: Identify the Tool or Connection First For a 3-1/2-inch Shorty redress kit, provide the tool manufacturer, model revision and component list. Specify each AS568 O ring size and quantity and identify any backup or non-rubber parts separately. For a hammer union seal enquiry, provide the connection size, figure and seal drawing as a separate configuration. A hammer union seal and a wireline tool O ring

4-Inch Figure 1002 TSI-Style Swivel Joint Repair Kit 4-Inch Figure 1002 TSI-Style Kit: Check the Joint Reference and Parts List This enquiry is for replacement parts for the stated 4-inch Figure 1002 TSI-style swivel joint reference. The nominal connection size and figure number do not define each seal dimension. Confirm the equipment manufacturer, exact joint style and revision before selecting parts. Order detail Required information Joint identity Manufacturer, 4-inch

3-Inch Figure 1502 Wide-Style Swivel Joint Seal Repair Kit 3-Inch Wide-Style Swivel Seals: Check Profile and Hardness Before Replacement The 3-inch dimension identifies the swivel joint reference, not the diameter of each replacement ring. Match the wide-style construction and individual seal dimensions; a narrow-style set or a kit for another joint size must be reviewed separately. Selection item Information to provide Joint identity Manufacturer, model, 3-inch Figure 1502

NBR and FKM Compound Enquiries for T-BRT Wireline Redress Seal Kits T-BRT Redress Seal Kit: Configuration and Component Requirements Confirm the T-BRT tool model and revision before selecting a kit. For a 3-1/2-inch Shorty or AP compact tool enquiry, identify that tool separately and provide its corresponding component drawing; the names do not establish interchangeable kit contents. List each O ring size and quantity, along with any specified backup or non-rubber parts.

#10 Setting Tool Seal Kits - NBR and FKM Rubber Components #10 Tool Redress and O-Ring Identification Shanghai Qinuo offers rubber seal kits for #10 setting tool maintenance. Order against the specific tool manufacturer and revision, with a parts list identifying each seal location and quantity. NBR, HNBR and FKM options must be selected for the actual service conditions. The listed hardness option is 80 Shore A. Confirm the hardness for each component against the tool

SHQN AS568 Wireline Adapter Repair Seal Kits with Compound Options NBR, HNBR and FKM Wireline Kits: Specify Each Seal Location List each AS568 size or drawing dimension and quantity, then assign the required compound and hardness to that component. NBR, HNBR and FKM are separate material options; confirm their compound designations rather than treating the names as interchangeable kit grades. Provide the actual fluid, continuous and peak temperature, pressure, movement and

GC Stripper Head Redress Rubber Seal Kit: Compound and Hardness Enquiries GC Stripper Head Redress Kit: Head and Seal Matching Confirm the actual GC stripper head configuration and the seal location for each replacement component. Provide the line or rod dimensions where relevant to that location, together with the equipment drawing; the head name alone does not define kit contents. List each O ring size and quantity and identify any specified backup or non-rubber parts

SHQN Custom Wireline Adapter Kits with AS568 NBR O Rings Custom Adapter Kit: AS568 Sizes and 90 Shore A NBR Requirements Define the kit by its adapter model and revision, then list each AS568 O ring size and quantity. Add any specified backup or non-rubber parts separately; agree the complete component list before approving the kit. For a 90 Shore A NBR configuration, confirm the compound and hardness tolerance and provide the fluid, temperature, pressure and any movement.

SHQN DWS 3-5/8 Compact Wireline Adapter Rubber Seal Kit DWS 3-5/8 Compact Kit: Tool Matching and Seal Requirements The 3-5/8 designation identifies the listed compact tool configuration rather than the diameter of every O ring. Confirm the actual tool model and revision, then list each seal dimension and quantity from the agreed component drawing. Specify the compound and hardness for each seal location, together with fluid exposure, continuous and peak temperature, pressure