Custom Plastic Products

PEEK Sheet and Rod for Chemical-Service CNC Parts — Stock Selection and Service Life Specify whether the order is a PEEK sheet, rod blank or finished CNC part. Provide sheet thickness and flatness, or rod diameter and length, with machining allowance and final drawing tolerances. For chemical-service parts, identify the fluid, concentration, cleaning agents, temperature and exposure cycle. Agree the resin grade and inspection requirements before comparing service life. Some

OEM/ODM Moulded PEEK Drilling Parts — Tooling, Sample Fit and Repeat Production For an OEM replacement or an ODM development part in drilling equipment, start with the controlled drawing, assembly function and PEEK grade. Define moulded features, mating tolerances, parting-line restrictions and surfaces requiring secondary machining. Approve sample fit in the intended assembly before establishing repeat-production acceptance criteria. Some of Peek’s material properties: =>

Custom injection-moulded PEEK parts are reviewed against the actual thermal duty. A requirement at 300 degrees C needs the exact resin grade, exposure duration, atmosphere, mechanical load and acceptable dimensional change, together with applicable material data and finished-part validation. Do not assume a continuous 300 degrees C service rating from the PEEK material name. Provide the drawing and distinguish continuous operation from brief temperature peaks. Available

Custom PEEK plastic parts for elevated-temperature duty require a specified resin grade and finished-part geometry. State continuous temperature, short-term peaks, dwell time, thermal cycles and load during heating. Include mating materials and allowable changes in clearance or dimensions. Agree sample checks after the specified thermal exposure before setting a service-temperature requirement. Available Technology: Injection moulding; CNC machining reviewed for drawing and

Custom Injection-Moulded PEEK Filter Parts — Flow Geometry and Service-Life Requirements For a custom PEEK filter component, distinguish the support, housing or spacer from the filtering medium itself. Provide bore, flow openings, wall thickness, mounting and sealing dimensions on the drawing. Specify resin grade, operating fluid and pressure differential so the moulded component can be reviewed for fit and service conditions. Some of Peek’s material properties: => Chemical

Custom PEEK Parts for Hot-Water and Steam Exposure — CNC or Injection Moulding Choose CNC machining or injection moulding for the specified PEEK part using the drawing, quantity and critical tolerances. For hot-water or steam exposure, state pressure, normal and peak temperature, cycle duration, cleaning chemicals and required service life. Agree the resin grade and acceptance checks for dimensions and material condition after the specified exposure; hydrolysis resistance is

Custom PEEK Tubing and CNC Chemical-Equipment Parts — Bore and Wall Specifications PEEK grade and tube-form requirements: For a PEEK tube or a CNC-machined tubular part, specify inside diameter, outside diameter, wall thickness, length and tolerances. Identify whether the order is stock tubing or a finished sleeve or fitting. Confirm the 450G grade reference using material documentation and agree machining stock, end features and surface finish for the drawing. Some of Peek’s

Custom PEEK Industrial Parts — Unfilled and Carbon-Fibre Grade Selection Specify whether the ordered PEEK component is unfilled or carbon-fibre reinforced and identify the exact grade and filler content. Confirm color separately against the approved grade or sample; natural-color and reinforced references should not be assumed to describe the same formulation. Provide the drawing and required mechanical, electrical and mating-surface properties before material selection. Some

Custom Moulded PEEK Parts — Glass-Filled, Bearing and Contact-Grade Requirements Choose the PEEK grade for the function of the ordered part. Glass-filled, bearing and food-contact references describe different specifications and may not apply to one formulation. Provide the drawing, mating materials, operating conditions and any contact regulation, then approve one exact grade and its inspection requirements. Some of Peek’s material properties: => Chemical resistance:

Custom PEEK engineering parts made by CNC machining or injection moulding are specified by resin grade, geometry and load conditions. Provide the drawing, critical fits, normal and peak temperature, chemical exposure and load duration. Agree strength, stiffness, creep and dimensional acceptance criteria for the finished part; a general PEEK designation does not establish a component rating. Available Technology: CNC machining or injection moulding selected for drawing and

Custom PEEK Drilling Equipment Fittings — Mating Interfaces and Load Requirements Specify a PEEK component for the exact drilling equipment assembly using the part drawing and revision. Identify whether it serves as a sleeve, spacer, guide or sealing support, then define bore, outside diameter, shoulders and mating clearances. A polymer fitting is not automatically a substitute for a structural drill-pipe connection or a pressure-containing metal fitting. Some of Peek’s

Custom Injection-Moulded PEEK Healthcare Fittings — Drawing and Grade Requirements For a custom PEEK healthcare fitting, specify the intended device function, contact category and controlled drawing before selecting a resin grade. Provide connector geometry, bore dimensions, sealing interfaces and tolerances. Injection-moulded samples need agreed inspection criteria for fit, flash and surface condition; medical suitability must be established for the specific grade and

Custom Moulded PEEK Parts — Thermal Cycles and Dimensional Fit Select a custom moulded PEEK part using its drawing, resin grade and actual thermal duty. Provide continuous temperature, short-duration peaks, cycle frequency and exposure time together with load and mating dimensions. Review fit at installation and operating temperatures; a generic polymer temperature figure does not establish the rating of the finished part. Some of Peek’s material properties: => Chemical

Moulded PEEK Chemical and Pharmaceutical Fittings — Cleaning Cycles and Contact Surfaces Specify a custom PEEK fitting using the process drawing, connection geometry and intended contact with chemicals or pharmaceutical media. Define bores, sealing faces, surface finish and areas requiring controlled cleanliness. Include the full cleaning or sterilization sequence with concentration, temperature and cycle duration before grade and process approval. Some of Peek’s material

Custom PEEK Plastic Parts — Chemical Exposure and Cleaning Compatibility For a PEEK component exposed to process chemicals, provide the fluid name, concentration, mixtures and contaminants together with temperature and exposure duration. Include cleaning and shutdown fluids as well as normal operation. Select the exact resin grade and agree dimensional or mechanical retention criteria for the finished part. Some of Peek’s material properties: => Chemical resistance: Assess

Black Custom PEEK Parts — CNC and Injection-Moulding Specifications Specify a black PEEK part using the exact resin grade and drawing rather than color alone. Confirm whether the black appearance comes from the selected grade or an approved color formulation, and identify any fillers. Review electrical, wear and chemical requirements separately; black color does not establish conductivity or bearing performance. Some of Peek’s material properties: => Chemical resistance:

Custom PEEK Oil and Gas Parts — Combined Chemical and Thermal Duty Specify a PEEK oil and gas component against the combined fluid, temperature and mechanical conditions of the assembly. Provide the drawing and part function together with normal operation, start-up, shutdown and cleaning cycles. Identify resin grade, fillers and critical sealing or bearing interfaces before agreeing finished-part acceptance. Some of Peek’s material properties: => Chemical resistance: Include

Custom CNC PEEK Parts for Oil and Gas — Grade, Fit and Chemical-Service Selection PEEK (polyetheretherketone) parts can be specified for oil and gas equipment using a controlled drawing and an identified resin grade. For a CNC component, provide sealing or bearing function, mating dimensions, tolerances and surface finish. Review fluid composition, pressure, temperature and loading against the selected grade data before approving the part. Some of Peek’s material properties: