Oilfield Swab Cups

TA-Style Rubber Swab Cups for 2-3/8-inch, 2-7/8-inch and 3-1/2-inch Nominal Tubing For TA-style replacement swab cups, identify the original cup drawing or part reference and confirm the actual tubing internal diameter. Match the cup outside diameter, height, bushing dimensions and mandrel bore for the nominal 2-3/8-inch, 2-7/8-inch or 3-1/2-inch requirement. Profile names alone do not establish interchangeability. Specify produced fluid, suspended solids, temperature and

MV-Style Multiple-Lip Rubber Swab Cups for 2-3/8-inch, 2-7/8-inch and 3-1/2-inch Nominal Tubing Part Name MV Style, TA style, TUF style, NUF style and V style Environment oil, gas, gas condensate Available Material Nitrile (NBR), HNBR or FKM options; reinforcement and compound per confirmed cup drawing MV-style rubber swab cups use multiple upturned lips around a steel or aluminum bushing. For the nominal 2-3/8-inch, 2-7/8-inch and 3-1/2-inch tubing references, confirm the

TA-Type Rubber Swab Cups for 2-3/8-inch and 3-1/2-inch Nominal Tubing Sizes TA Swab Cup Fit and Ordering For TA-type swab cups, provide the actual tubing internal diameter, cup dimensions, bushing and mandrel fit, fluid composition and expected operating load. The listed 2-3/8-inch and 3-1/2-inch sizes are nominal references; confirm actual cup dimensions from the drawing. Application Application of the Swab cup: A swab cup fits the swab mandrel and contacts the tubing or

V-Type Rubber Swab Cups — Bushing and Mandrel Fit Selection V-type swab cups are listed in light-duty and heavy-duty configurations for fluid-lifting enquiries. For a replacement, match the cup bore and bushing geometry to the mandrel, and review the lip profile against the actual tubing bore and restrictions. Specify whether the required bushing is aluminum or steel on the order drawing; the steel-core dimensional rows below describe separate listed configurations. Provide

Aluminum-Core Oilfield Swab Cups for 2-3/8-inch, 2-7/8-inch and 3-1/2-inch Nominal Tubing For an aluminum-core swab cup, confirm the aluminum bushing dimensions, mandrel bore and connection, cup outside diameter and lip profile against the assembly drawing. This listing covers nominal 2-3/8-inch, 2-7/8-inch and 3-1/2-inch tubing references; provide the actual tubing internal diameter and restrictions for fit selection. Specify fluid composition, suspended solids, temperature

Nitrile Aluminum-Core Swab Cups — 2-3/8, 2-7/8 and 3-1/2 Inch Size References Shanghai Qinuo supplies rubber swab cups for fluid-lifting enquiries. For the aluminum-core item, specify the cup profile, mating mandrel dimensions and actual tubing or drill-pipe bore. The listed inch sizes are selection references; confirm cup outer diameter, bushing bore and assembled clearance from the approved drawing. Nitrile compound selection depends on fluid formulation and operating

TA-Style Swab Cups with Aluminum or Steel Core: Standard and Undersize References TA-style medium-load cups are offered with aluminum or steel bushings. Use the table to compare the specific standard and undersize configurations, then confirm cup height, core dimensions and actual mandrel fit before ordering. For the 2-3/8-inch reference, the listed standard OD is 1.990 inches and undersize OD is 1.945 inches, both with 1.120-inch ID. The 2-7/8-inch entries differ in both OD

Aluminum-Core Swab Cups — Tubing Size and Temperature Review Part Name Aluminum-core enquiry; TA/MV and other profiles specified separately Environment Specify actual well fluid, additives, sand content and temperature Available Material NBR, HNBR or FKM by selected compound; aluminum core by order drawing. Other reinforcement configurations require separate specification. This listing covers aluminum-core swab cup enquiries with 2-3/8, 2-7/8 and 3-1/2-inch size references.

Aluminum-Core Undersize Swab Cups for 2-3/8-inch, 2-7/8-inch and 3-1/2-inch Nominal Tubing Available types of Swab cups: TA style: A medium-load cup built around a steel or aluminum bushing. Confirm the tubing bore, mandrel fit and required load range before selecting the cup; compound and dimensions must match the actual well conditions. MV style: A multiple-lip cup with a steel or aluminum bushing. Confirm the lip profile and fit for the tubing restrictions and suspended

TA-Type Steel-Core Rubber Swab Cups for 2-3/8-inch, 2-7/8-inch and 3-1/2-inch Nominal Tubing For this TA-type steel-core swab cup listing, confirm the steel bushing geometry, mandrel connection and rubber-to-metal bond requirements against the cup drawing. Provide the actual tubing internal diameter, bore restrictions and cup outside diameter for the nominal 2-3/8-inch, 2-7/8-inch or 3-1/2-inch requirement. Select the rubber compound for produced fluids, suspended solids,

Oilfield Rubber Swab Cups for 2-3/8-inch, 2-7/8-inch and 3-1/2-inch Nominal Tubing Shanghai Qinuo supplies rubber swab cups in several profiles for nominal 2-3/8-inch, 2-7/8-inch and 3-1/2-inch tubing requirements. Provide the actual tubing internal diameter and restrictions, cup style, mandrel connection and bushing dimensions before ordering. Select nitrile or another specified compound for the produced fluid, solids, temperature and operating load; nominal tubing size

Steel-Core MV-Style Nitrile Swab Cups for Oilfield Tubing Swab Cup Ordering and Selection Specify the cup style, quantity, tubing bore and mandrel dimensions so the required fit can be reviewed. Include fluid composition, suspended sand, operating temperature and expected load. These conditions guide compound and reinforcement selection. Provide drawings or samples for custom cups and confirm dimensional tolerances, compound and delivery requirements in the quotation. Welcome

China Manufacturer Custom Made Steel-Core V-Type Rubber Swab Cups: Profile and Bore Selection This listing covers a V-type rubber swab cup with a steel core. Confirm the upturned-lip geometry and core bore from the required component drawing. The catalog includes several cups sharing a 2.495-inch ID but having different outside diameters, so the bore alone cannot identify the replacement. Select the complete OD/ID combination and confirm cup height, core dimensions and actual

Rubber Oilfield Swab Cups for Liquid-Lifting and Well Intervention Shanghai Qinuo supplies molded rubber swab cups in several profile families for liquid-lifting operations. Nitrile and other specified compound options are reviewed for the process fluid and temperature. Confirm the exact cup dimensions, mounting arrangement and duty before selecting a replacement. Available types of Swab cups: TA style: TA is a medium load Swab Cup built around a steel or aluminum bushing for

Rubber Swab Cups with Aluminum or Steel Core for Nominal 2-3/8-inch, 2-7/8-inch and 3-1/2-inch Tubing Available types of Swab cups: TA style: A medium-load cup built around a steel or aluminum bushing. Confirm the tubing bore, mandrel fit and required load range before selecting the cup; compound and dimensions must match the actual well conditions. MV style: A multiple-lip cup with a steel or aluminum bushing. Confirm the lip profile and fit for the tubing restrictions and

China Manufacturer Custom Made Custom Metal-Core V-Series Rubber Swab Cups For a custom V-series rubber swab cup, confirm the required core material, lip profile and component drawing. The size table shown here describes steel-core configurations; an aluminum-core version requires its own confirmed dimensions and material specification. Provide cup OD, ID, height, core length and mandrel fit together with the actual tubing bore. Include produced fluid, suspended solids,

China Manufacturer Custom Made V-Series Rubber Swab Cups for Specified Swabbing Loads Select a V-series swab cup by its component drawing and intended operating load. The original catalog lists both standard and heavy-duty 4-1/2-inch steel-core cups at 4.062-inch OD and 2.495-inch ID. Those shared dimensions do not identify the reinforcement, rubber compound or load capability. Confirm the exact version, lip profile, cup height and mandrel fit. For sand-bearing fluids,

Custom Nitrile Rubber Swab Cups with Steel Core for Oilfield Tubing For a custom nitrile rubber swab cup with a steel core, specify the original profile or provide a dimensioned drawing. Confirm cup OD, ID, height, core bore and mandrel fit for the actual tubing internal diameter; 2-3/8-inch, 2-7/8-inch and 3-1/2-inch are nominal tubing references. Provide produced fluid, suspended solids, temperature and expected load for compound selection. A custom color is an identificati

Custom Nitrile Oilfield Swab Cups: 4-1/2-inch Nominal Size and Style Selection Available types of Swab cups: TA style: A medium-load cup built around a steel or aluminum bushing. Confirm the tubing bore, mandrel fit and required load range before selecting the cup; compound and dimensions must match the actual well conditions. MV style: A multiple-lip cup with a steel or aluminum bushing. Confirm the lip profile and fit for the tubing restrictions and suspended solids present

Nitrile MV-Style Swab Cups with Steel or Aluminum Bushing MV-style nitrile swab cups have multiple upturned lips around a steel or aluminum bushing. Select the exact configuration by cup OD, cup ID, bushing dimensions and mandrel fit. The table lists 1.992-inch OD / 1.120-inch ID for the 2-3/8-inch tubing reference, 2.431-inch OD / 1.370-inch ID for 2-7/8-inch, and 2.985-inch OD / 1.370-inch ID for 3-1/2-inch. These are catalog cup dimensions; confirm actual tubing bore, cup